Flawless Scarf Join in Plywood- Setbacks into Success! - Free Range Boat Build Stage 10

Подписаться 137 тыс.

Просмотров 7 тыс.

50% 1

Join us as we transform a frustrating failure into a triumphant success! Last week, we encountered some challenges with a crucial step of the build, but today we're back with a successful scarf join in plywood. Follow along as we refine our technique, overcome obstacles, and achieve a seamless join. Your feedback and support mean the world to us, so please keep sending in those valuable comments, share, and subscribe!
#woodworking #boatbuilding #sailing #diyprojects
Support us and gain early access to videos and other exclusive rewards.
Become a patron of Free Range Living today! / freerangesailing
Some of our fans prefer to make a direct contribution by Paypal: www.paypal.com...
Free CNC plans can be found at this link: navigatorjoel....
The builders' forum can be found at Facebook: / jwdesigns
OUR SOCIALS
Follow us on: Instagram: / freerangehomestead
Facebook: / freerangesailing
FREE PROVISIONING GUIDE
Pascale has put together a FREE 40 page Provisioning Guide. The Guide explains and provides examples of how we can travel eating a variety of healthy and delicious meals for up to 6 months at a time on our tiny boat with no resupply. There has never been a better time to start learning how to increase the food storage potential of your home. I hope this guide will inspire you to make more informed long term provisioning choices for the future! For more information visit the Provisioning Page on our website ( www.freerangesailing.com/boat-provisioning ) or to grab a copy directly by clicking on the link below.
LINK HERE: Download your FREE Provisioning Guide: bit.ly/3adbloF
Also if you want to find out more about what I am cooking up every week for us at the homestead (and previously aboard SV Mirrool) you should follow my foodie Instagram page! gourmetsailor
Music Credits
Our theme tune (outro and/or intro song) Aquarium by TEVO. You can listen to his music here: soundcloud.app...
All music sourced from Epidemic Sound (www.epidemicsound.com)
On the request of one of our patrons we put together a playlist of some of our music on Spotify. Follow along and listen here: open.spotify.c...

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@knolltop314 Месяц назад

Loved this episode and previous. Clearly illustrated a process for achieving scarf joint . . . including potential challenges.

@jebw Месяц назад

I admire your integrity and work standard. Modern high performance blades produce a fantastic result.

@Stevecollinsclear Месяц назад

great joy to be following along

@jamieminton172 Месяц назад

Six decades of accumulating skills and I still enjoy learning. Should I ever have the need to scarf plywood I think I have a recipe for success thanx to your example. Nice work. I chuckled at the birthdays around Christmas remark. Here on the upper side of the planet it is the opposite months. Long winter nights ya know. 🤣🙃

@redrover9988 Месяц назад

Wish someone had told me about using a fine tooth metal in plywood years ago. That cut was beautiful.

@FreeRangeLiving Месяц назад

A very welcome tip

@annhysell6064 Месяц назад

Well done & very well explanation of your thought process. Glad you are happy with the results. I try to read through the comments, so THANK YOU all others as we all learn from wisdom & experience. Appreciated. Be well.

@seafuryphil Месяц назад

I do enjoy your build videos the most . I started watching your adventures a few years back and really enjoyed the refit in Taz. Not just your wood and glass work, but the way you convey information to the camera is excellent. The fact that you don't edit out your mistakes and then discuss what led to it then the process of working out the issue . It keeps with the very genuine nature that has always exuded from your channel . Keep being awesome, both ,or I suppose all three of you . Cheers 🍻🇨🇦

@peterlee440 Месяц назад

Thanks troy

@richardcook4007 Месяц назад

Thanks for sharing.

@ronprince1478 Месяц назад

Looking good.

@Robbieburnett1 Месяц назад

Loving the build mate! Looking forward to you doing the rigging ! Hoping you've got some nifty tricks up your sleeve

@FreeRangeLiving Месяц назад

I'm sure the comments section will light up then. Sailors love talking rigging even more that anchor theory.

@DavidSmith-tu6jd Месяц назад

Troy! When cutting ply across the grain try scoring along the line with a Stanley or craft knife. It only cuts the top veneer but leaves a perfect cut. Should you need two perfect edges after cutting simply score a parallel line with the knife along a straight-edge, a saw's blade width apart, then jig-saw between them.

@FreeRangeLiving Месяц назад

Both very useful tips, Thank you. I should have occasion to pass them on pretty soon

@DavidSmith-tu6jd Месяц назад

@@FreeRangeLiving p.s. Ever considered using a plane on your scarf joints? Just asking as that's my preferred method. Great work, enjoying it tons as I have from free range sailing ep1.

@FreeRangeLiving Месяц назад

@@DavidSmith-tu6jd I just figured it would be easier to get a good result with the router over a large area. On short scarfs, I'm going to give it a go.

@americanbornwalkaway9110 Месяц назад

ALWAYS AWESOME to see what you are Up to!!!!! THANK YOU for SHARING!!!!!

@vingreensill Месяц назад

Great vid. Thank you.

@shaunglendinning Месяц назад

Appreciated as always Troy! Cheers Mate.

@hedleyjackson5131 Месяц назад

Great video beautifully presented as ever

@judyfisk9657 Месяц назад

Great stuff going on on your channel another way to cuy ply is to cut 1-3 mm away from your line run a batten along your line use your router you love to use with a flush trim bit with bering top or btm bit and use the baton as the guide on the bering this works realy well when doing planks in boats as well . A nother way to scarf is to use a grinder to shape the scarf keeping your ply lanonat lines strate and paralel to each other and finish with a hand plane to take out any high spots also having a small hollow in the center of the scarf alows for a bit more thickend epoxy in the joint and alows the edgers to sit a bit better flush to each other . Hope some of this helps you along the way i use these methreds in my day to day wooden boat repairs at work

@FreeRangeLiving Месяц назад

I sometimes look in awe at the mess my router makes- I can only imagine what a Flap disc on my largest grinder is capable of! 😆

@Quarry4x4 Месяц назад

As a Chippy I can tell you how I would do it but it wouldn't be much different. Thanks for sharing.

@markpalmer5311 Месяц назад

I’ve scarfed with a Ryobi planer and had very satisfactory results. Nice work!

@johncollins5021 Месяц назад

Thank you. For taking us on this journey. Aka boat build enjoying it looking forward to the next one.

@greglaing3721 Месяц назад

When using epoxy in cold conditions we heat resin in a hot water bath before mixing with hardener

@the-naked-sailor Месяц назад

.... drying is the issue, not application.

@richardp4544 Месяц назад

Actually I feel bad that I didn't tell you about using the metal cutting blade for plywood in the beginning. An old cabinet maker taught me that lesson many years ago and I've used that technique for so long that I just take it for granted that everyone knows about it. Fortunately someone else was on the ball and shared that nice tip with you. We learn as we go but sometimes a tip or so from someone who has already experienced it can save a lot of time or work. The project is coming along nicely and I can hardly wait til you start with the assembly phase of the build. Of course once you reach that stage I'll be looking forward to the test sail stage. 🙂

@FreeRangeLiving Месяц назад

When we were making sailing videos, Pascale would always bug me to explain what I was doing. I thought it was silly, as everyone would know that stuff. As it turned out, she was right and they didn't!

@richardp4544 Месяц назад

It's amazing how so many people don't know as much as we think they know. As far as the sailing videos go when you stop to think about it there aren't as many sailors out there as we might think so every move that you and Pascale made on the boat, or off the boat for that matter, was something new for them. I have in the past referred would be and novice sailors that have asked me, because I'm still a member of a yacht club, for advice to your channel, partly because I don't have the time to teach them all that they want to learn, but mostly because your videos contain a wealth of knowledge that the two of you thoughtfully chose to share with everyone interested in watching them. Not only are your videos entertaining, they are also educational. Thank you on their behalf and mine.

@TheBeaker59 Месяц назад

Coming along nicely, yes had success in the past with finer teeth blades also scoring along line with craft knife and then cutting just outside line. A bit of breakout disappears though behind fillets so not end of world. You can get winter hardener but generally I use summer all year and just get more patient as I don't want to risk batches cooking off.

@FreeRangeLiving Месяц назад

Yes, where future fillets are going to go is foremost in my mind when it comes to finishing!