Flip-Top Tool Stand with integrated cable management | Mobile Workstation 

➤PLANS for the tool stand: bit.ly/flip-top-tool-stand-plans

This press has worked like a charm for my projects ru-vid.comUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

Well, that’s the cutest supervisor I’ve seen in the industry so far 👀

Love the Quality Manager assistance. I always love when my kiddos help!

The little worker is better than most!

Excellent! The built-in storage is pure genius - so many flip top stand designs lack this essential feature. And a bonus third workstation - WOW!

Love your assistant. You are a very lucky man.

Nice job! I liked the locking pins! Very nice. I especially liked the use of your grandpa’s bolts to anchor down. We must remember our past

Very nice piece of workshop furniture. Looks the part and seems to function well. Well designed and thought out. Congratulations.

This is a beautiful build. Definitely gave me some great ideas for my own build in the near future.

One of the best stand I’ve ever seen ,keep up the good work man. Also that card trick was awesome.

WOW!! Nothing like having a shop full of second hand junky tools. A really wow cabinet configuration. And of course your daughter will LOVE inheriting it all.

Hello my friend. This is a pretty good idea, and it's great. Useful and practical for narrow spaces. I can do it for a few of my tools. Thank you for the introduction and information. See you. Big greetings. stay healthy and happy...

Fantastic workmanship.

Very nice video. Concise and too the point but not too vague.

Just placed my order and am looking forward to this build!

Very good video. Thank you. I used to cut down full sheets of ply as you were doing on the table saw with many of the same problems, then I bought a Festool track saw on recommendation from another wood worker and now cutting down sheet goods is easy and IMHO much safer than using the table saw.

Nice design and presentation. I’ve subscribed and I’m binge watching. 😊I so admire your fluency with English. Best Wishes from Canada.

Clear instructions, good video. Love it. Thanks for sharing.

Great build! Thank you for the video!

SUPER tout à porter de mains bon travail Merci

la verdad me encanto la primera vez q veo un banco asi vasculante sos un genio.

sir good work super

Spring index pins are awesome!

That’s very nice thank for the video

Отличная идея. Мастер молодец. Привет из России.

Very very nice build!! Thanks!

BELLISSIMO VIDEO. OTTIME LE REALIZZAZUIONI. COMPLIMENTI. SALUTI SALVIO

Great job, amazing result!!! Regards from Brazil. Dieter

🤩 wish I have seen this first before I built my flip table 😩 Wonderful design!!

This is so awesome!!!

Massimo from Italy . Very good job ! Nice !

Great job my man

A very good project and i have purchased plans. A cutting list would have been very useful also the electrical fittings instruction.

Great ideas and video. Thanks.

Bau-Woodworks Great build! Man, you have a beautiful shop!

Good work, I made mobile liftable workbench with DEWALT DW745 and DW735 today!

Really great project!

Great build! I would love to build one myself. Greetings from the Philippines!

Loved so much the project...Awesome ♥️, and loved to watch the building process too. Fantastic 👏

VERY VERY INFORMATIVE

Very professional

I think this channel will grow up faster. Glad to be your subscriber. Danke...

Love it! I will most likely replace my flip cart with this model. Well thought out.

Nice job

great idea

8:47, YES! If u find out the wood patch, it prove the plywood is very good,not the bad board!

muy bueno!!! saludos desde Argentina

Man, that looks amazing. Great video. I enjoyed your sense of humor. Party on.

Wonderful work keep going

@14:00 my favorite part of the build!

Glad I found this! I'm in the process of building my own flip top (for my spindle sander and my planer), and I'm definitely going to use those indexing pins. That's way nicer looking then what I was going to use. Might even using that idea of drawers, although I might not have enough plywood for that. Ha! Great video, sir. Amazing that you only have 296 views!

Super job! I am reworking my small shop and need floor space. Excellent build that has given me some guidance. I have a jointer that is 1m long and will put my thickness planer on the flip side. Cool idea with the index pins. Just subscribed. Keep up the videos. Viele Grüße aus Baden Württemberg.

Bis auf die Verkabelung ohne Aderendhülsen top. Schön gebaut und passt... Über die Elektrik würde ich nochmal schauen...

Any racking occurring at all? This is an awesome build.

What kind of table saw is that with a cross cut sled. Very nice.

Отличная работа.

Really great!!!

Good work I just subscribed from Tasmania Australia

Awesome!!

Cool

Nice jobs. 😀

awesome

Espero exista un heredero para todas esas herramientas, saludos

So cold I like your

Did you have to drill out the column to better connect the drill press head to the column? Mine is held on by a set screw, which is fine with gravity assisting. I'm assuming upside down the little set screw isn't going to cut it.

شعوب احترمها كثيرآ. جهد بشري اقدره

Great build 😉 I consider rebuilding this myself, because I have such a small workshop - that flip-top solution would come in SO handy!! Btw: solid english 😊👌🏼

How do you know/measure how tall/large of gap you need, for each tool to rotate without bumping? I have a Ridgid R4331 bench top planer and a Delta Cruzer 10" miter saw that I would like to build a flip top cart for. Thanks!

Echt cool💪😁

Hello, is the pipe stationary when you are flipping the stand or does it rotate along with stand?

Love it thank you. I had wanted to do a flip top for my band saw and drill press but thought they were too high. That looks very sturdy. Please take care of your lungs though. I noticed you weren’t wearing a mask much.

Great cart! Where did you find the locking pins that you use on your cart?

Are plans measurements in Imperial as well as Metric?

0:12 At this moment (being the first time seeing you and your channel) i had a just a moment of thinking that Jason Momoa had started a youtube woodworking channel ;-))))) In that instance your face do look like him a lot and the muscles are there too, not like his but as i said, it was for just like a few moments. I hope you're not offended that i shared this thought here... now. I literally stopped the video to comment until i forget to do it ;-) Cheers!

Where did you find the spring loaded indexing pins?

I want to build a similar one. What size drill press is that? I am wondering if the 12 inch drill press be too high of a tool to have a flip top cart and make it unstable. How is your experience so far while using it?

At 16:10 to 16:20 I noticed the stand was very unsteady and swayed back and forth as you were clamping and drilling on the side table. How secure is this mobile workstation and what could you done to firm it up?

Hi Fabi, Nice Flip-top stand! Looking for those indexing pins, where did you source them from ?

I like the indexing pins. I was wondering how the holes in the flip top are fareing? How long is the pin that goes into the top? Do you think it would be prudent to add pieces of tubing similar to the bearing surface for the 3/4" pipe? Thanks for sharing.

Nice project, quality management very professional. Would a counter weight at the bottom plate stabilize the construction against vibration etc.? KR from Germany, subscribed ☺

Hello !! Greetings I am interested in the plane and I would like to know how high is the drill press?

Hello Fabian, i am building a flip top for a miter saw. For securing the table i like to use your indexing pins. Can you please give me a Link to the shop where you bought them? Thank you

Ótimo projeto parabéns já me inscrevi aí parabéns 🇧🇷

That is a much better pocket screw jig. The tensioning handle is on the BACK! My Kreg is up front and is totally in the way of the dust collection.

The construction is awesome, however due to the nature of the build, does it not wiggle a bit? Id potentially add some suporting mechanisam that can be removed when flipping just to ensure that its somewhat "Wiggle free"?

I must have missed a detail as I did not see how you stopped the spindle from going round and round, I apologise as it was most definitely my fault but at seventy years old I sometimes have these blanks (don’t worry I no longer drive and my son keeps an eagle eye on me if I am using any tools). It will not be long until I sit in the corner and just make weird noises (oh, hang on I have also been accused of that) but I just conveniently forget about it). It is amazing what you can get away with and blame it on dementia. I enjoy your video and I will type that in before I forget that as well. PS my son tells me I am only sixty nine so I am not as batty as everyone says.

Top Daumen hoch !!!

Its wobbling, right?

Topppppp work

I didn't understand all the english speech but good job and good idea !

Hi, great vid 👍 thanks. What do you estimate the weight of the 2 tools is? Did you choose tools of similar weight?

Awsome idea! I had try to build analog in sketchup and I have a question: what is height of your drill press? I am planning using something like jet jdp15 and it height is 1 meter. In this case stand looks to much high.

Rip the beech.... Hahahaha. Love it

hi, what stops the top from twisting around more than once and damaging to cable?

I would build something like this but I don’t have a young lady from quality management that will assist me so I’m going to wait until I get one of those first.

I would like to use a similar concept to create a tabletop out of a dual sided door, so that both sides can be displayed. Is there any way to do this without drilling all the way through the door, and just adding extensions to serve as an axle on both sides?

can you please provide me the link for the plans ??

my issue with these flip stands is the wobble. i better think of ways to reduce it.

Can you tell me what the 4 snap pins are and there size. Cant seem to find them in the US. But love the concept. Thank you