Fluid Film Black vs Fluid Film - Are They Identical? - Undercoat Review & Comparison Test

Подписаться 7 тыс.

Просмотров 42 тыс.

50% 1

Review and Comparison Test of fluid film black vs. regular fluid film to prevent rust.
Purchase Fluid Film Here ► amzn.to/3MVQdGY
Purchase FF Black Here ► amzn.to/3whwSt8
Commissions from sales financially support creators like myself, thank you!
By The Sea by EuGenius Music | / eu-genius
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...

Авто/Мото

Опубликовано:

8 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@KurtofTrades 6 месяцев назад

Here is a really awesome compressed air kit if you are looking for one! ► amzn.to/3vD9zxf

@MrDefyreality13 9 месяцев назад

this is a very simple, yet perfect review of the two products, and how they perform in a real use case.

@KurtofTrades 9 месяцев назад

Thanks!

@jasoncharles6980 8 месяцев назад

Very well done. You would make Project Farm proud.

@w.c.6678 9 месяцев назад

They should sponsor you. They're missing out on an opportunity. Great vid! Thanks man.

@Lamtitude Год назад

Thank you for taking the extra step of spraying it directly onto the paint to give a great visual representation of how long it lasts. That was truly a selfless act that I, nor almost anyone else would never do. I just bought a gallon and a sprayer.

@vincentnichols402 Год назад

The Black is helpfull you can see how long it last, easy to check on in the Spring 🧐👍🏻

@YellowJacketGarage 2 года назад

Never heard of that stuff before, good to know it exists.

@howebrad4601 5 месяцев назад

You are correct on most car washes and salt. To get it all you need tk be extremely thorough and get all over underneath with an underbody wand, also using salt away spray at the same time. Good review

@HandyRandyReviews Год назад

great video. I use this stuff and it works wonders on my old Jeep in the PA winters.

@mmaaddict78 7 месяцев назад

PA here too. I have a 2020 JL that I use it on and so far, so good. Make sure you blast as much as you can inside those frame cutouts. It will creep all through the frame if you hog it in there.

@phasechange5053 Год назад

Just did my ranger in the bucket of black , I like the black because i can see if its still there.

@dylandylandylandylandylan9911 Год назад

This was great, thank you!

@ukasz6539 Год назад

Great test! Could u do similar test in the future FF vs Canadian Corrosion Free Rust Cure pls 🙂

@miticav3709 Год назад

Thank you this is well done and informative.

@KurtofTrades Год назад

No problem!

@andrewgeorgelang 2 месяца назад

Excellent video. Was interested in how the black would work. Thanks again. Greeting's from Ontario

@KurtofTrades 2 месяца назад

Thanks! I like the black a little better but they are nearly identical

@postalinVT 2 года назад

Thanks for this Kurt, I'm about to have my car professionally done with this stuff.

@KurtofTrades 2 года назад

Good idea!

@joeshredz Год назад

Amazing, when reapplying this product what would be the best technique is pressure washing before use enough to prep it?

@KurtofTrades Год назад

Yea that’s probably the best just make sure it dries off fully before applying. I usually don’t do much prep

@TheCaperfish 7 месяцев назад

I mix graphite powder with my regular fluid film , doesn't take much to make it black , thats all they use in it so way more cost effective to add it yourself if using gallon or 20 L pails

@shadowman1992 Год назад

Hey man from your experience with fluid film once it starts to warm up like it is now and the fluid film is on your car pretty good with some dirt in it as well. Does the salt rinse off ? Or does it attach to the fluid film like the dirt and grime ? Starting to wash my undercarriage but the film is on there really good lol

@KurtofTrades Год назад

It can attach some to the dirt, it’s not a problem though becuase it’s not in contact with the metal. I just wait till alll the salt is off the roads then wash the underside really well.

@whatitisnt. 9 месяцев назад

Hi, how many cans would you think is needed for a normal sized sedan? Also is fluid film black necessary for black sedans? And would surface shields application stand out color wise on a black car or is the graphite powder needed. Thanks for your time

@KurtofTrades 9 месяцев назад

You don't need to use the black its just preference, takes about 3 cans for a car.

@whatitisnt. 9 месяцев назад

@@KurtofTrades wouldn't surface shield and regular fluid film stand out on a black car which wouldn't blend in aesthetically?

@JohnSmith-he2pg Месяц назад

Thank you for this video.

@mnap89 3 месяца назад

How do you remove old coating in order to reapply? Just pressure wash or you need some kind of solvent like brake cleaner or something like that?

@KurtofTrades 3 месяца назад

Pressure washer gets most of it, I usually just apply it over what’s left from last year

@wskripka1 2 месяца назад

Have you ever sprayed it inside body panels / cavities to prevent rusting from the inside

@yehornaumov5893 Год назад

Good stuff

@NinjaAirBike 2 месяца назад

Is there an option for clear spray? I want to spot treat some surface rust to prevent spreading

@KurtofTrades 2 месяца назад

The regular is more clear, not completely though especially if you put it on thick.

@TaurenJam 5 месяцев назад

Im getting a new vehicle. Should I wash underneath it before applying for the first time or does it matter. We are already in winter so there will be probably some salt underneath

@KurtofTrades 5 месяцев назад

I would try to, just make sure to let it dry good before applying

@davelock3166 5 месяцев назад

Great video. We have lanoguard here in the UK, which is similar to Fluidfilm, but it isn't black.

@KurtofTrades 5 месяцев назад

Good stuff!

@yehornaumov5893 Год назад

Used it on my legacy gt

@mmaaddict78 7 месяцев назад

In my experience, it takes a ton of detergent soap, such as Dawn to remove fluid film from a surface. Regular car washes, touchless or not, won't remove it. Even car washes with the rocker and under blasters don't remove it. Even Dawn will eventually get clogged up with lanolin and become ineffective at washing it off pretty fast, requiring more Dawn to be applied.

@solluna2155 7 месяцев назад

And that's why I love this product 👌💪🏽

@jerrys9226 7 месяцев назад

Me too!

@jjm6187 27 дней назад

Does this also keep existing rust in check?

@KurtofTrades 27 дней назад

If its really light rust it will help, if its really bad or if the rust is already on the inside of the panels then it probably won't help much.

@hulong0205 Год назад

What about the smell? Does Black smell better than regular fluid film? Thank you.

@KurtofTrades Год назад

Smells identical

@hulong0205 Год назад

@@KurtofTrades Oh no.... 🥲

@KurtofTrades Год назад

It goes away after a day or two

@hulong0205 Год назад

@@KurtofTrades neither I spray it wrong or too much. The smell is still there after like a week. Whenever it’s raining, it’s even worse.

@voidisyinyangvoidisyinyang885 2 месяца назад

I could only smell paraffin wax when I used Fluid Film Black. The MSDS also says paraffin wax as main ingredient. Not sure why they claim it's sheep oil.

@martinmorris6271 10 месяцев назад

Can you do a comparison video comparison of wool wax vs fluid film

@KurtofTrades 10 месяцев назад

I should yes! Good idea.

@whatitisnt. 9 месяцев назад

@@KurtofTradessurface shield too 😄

@1marcelfilms 2 месяца назад

Fluid film black would be somewhat better lube because of the graphite added. Still waiting for scented fluid film.

@flyurway 10 месяцев назад

In another video someone claims the black is simply done with graphite powder, he mixes in 3/4 cup of graphite powder to a gallon of regular fluid film and that's all it takes. Buying the graphite powder costs a fraction of the extra the black FF costs.

@KurtofTrades 10 месяцев назад

Can’t do that with the cabs though.

@whatitisnt. 9 месяцев назад

@@KurtofTradeswdym?

@henreedee 9 месяцев назад

@@whatitisnt. He meant you can't add graphite to the single-use cans, you can add to the large buckets if your applying with the sprayer.

@whatitisnt. 9 месяцев назад

@@henreedee will it not dilute and make it less affective?

@henreedee 9 месяцев назад

@@whatitisnt. @whatitisnt. I'm not sure tbh, but the graphite would mix into the fluid film and just add color, they don't add a lot, but by volume it would be like 200ml/3785ml = 0.05 or 5%. So still possible to affect, maybe that's why it clings to the car a bit more at the beginning of the demonstration

@manbearpig2164 Год назад

I use Surface shield by PB Blaster

@ukasz6539 Год назад

It doesent creep as good as FF?

@Boodieman72 7 месяцев назад

FF Black costs more if you buy the bulk sizes.

@dangollbeater 6 месяцев назад

Doesn't the salt and dirt just stick to the fluid film? If the fluid film won't wash off, arent those contaminants just building up on there? Next time it seems like you would be applying it over that crap again. Just curious about your thoughts?

@KurtofTrades 6 месяцев назад

Yea it will, but it holds it there so it’s not on the metal.

@JohnMWeaver 2 года назад

Why are you putting it on your car paint?

@KurtofTrades 2 года назад

Just so it is easier to see what it does. On the underside it’s hard to see it.

@randy5167 2 месяца назад

It was a demonstration

@lavacomplete6510 Год назад

If they could make a clear version

@KurtofTrades Год назад

Normal is pretty clear when it’s not super thick. I guess that is until it gets dirt caked on it. Clear would eventually get really dirty too

@donnygreen007 Год назад

this is why i wont put my car through a car wash with brushes.i dont want greasy fluid firm slapping my paint finish

@RychNovsky-ld3hf 6 месяцев назад

Be careful not to spray this stuff on your brakes :)

@BrokenSmokinSpokes 8 месяцев назад

Now I need a video on how to easily remove fluid film applied out of a 5 gallon bucket by the fluid film applicator. Stuff is thick and nothing takes it off and I need it all off lol...