Flying a Delta Kite CRAZY High with Camera & Crashing It

Подписаться 32 тыс.

Просмотров 24 тыс.

50% 1

I took my 9' Levitation Delta out to the beach on Fire Island, NY because I needed to straighten out some of my kite line. I attached my GoPro camera to the kite line to take some Kite Aerial Video since the kite would be up super high (always check local regulations & get clearance if needed before flying a kite too high). I recently replaced the stock kite frame with new carbon fiber tubes from Sky Shark (P400) and was excited to see how the kite flew with the new lighter frame. I was very happy with how it flew and discovered that it was my error that caused the spreader to splinter as I mention in the video. I did not properly secure the ferrule in the P400 carbon fiber tube and probably used a ferrule that was too short.
My name is Evan Reinheimer, I am a full time artist. I travel the world using a kite to lift my camera into the sky to create unique aerial photographs. This technique is called "Kite Aerial Photography." I exhibit & sell my artwork at art festivals across the USA.
My Instagram: / evanflieskites
My Facebook: / evanreinheimer
Visit my website to see my artwork & exhibition schedule: evanreinheimer.com
See how I do my Kite Aerial Photography & learn more about me here: • Flying a $6,000 Camera...
Sign up for my email list here: eepurl.com/bBVtnv
The music I use in my videos, use this link to sign up for a free trial and get 10% off if you choose to subscribe: share.epidemicsound.com/mfvs2d
**PLEASE SUBSCRIBE**
Thank you!
------------------------------------
Below is a list of equipment and supplies that I have used or talked about in my videos.
Help support my channel, click a link and make ANY purchase on Amazon:
Sony ZV-1 Vlog camera: amzn.to/2NQerWO
GoPro: amzn.to/3jopfJG
Newest camera (my KAP camera): amzn.to/31WBfZW
Travel drone: amzn.to/3dE4k5E
Microphone: amzn.to/33UaDdL
My backpack: amzn.to/2UZJW40
Kite flying gloves: amzn.to/2NNIRfL
Kite line: amzn.to/3YrndxH
Kite line reel: amzn.to/2ZxZuAl
KAP Foil Kite: amzn.to/324KSpD
Levitation Delta Kite: amzn.to/2ZqfTm2
Rig clips: amzn.to/329HslB
Remote control: amzn.to/2MW8b2U
Radio receiver: amzn.to/3rGsz6X
Rotation SERVO: amzn.to/3aVkBA1
New camera: amzn.to/2KSPhpO
Camera: amzn.to/2ZsW6Te
Older camera: amzn.to/33Y0UDh
25mm Lens: amzn.to/31YW0Ef
18mm Lens: amzn.to/2znvBnf
85mm Lens: amzn.to/3225yOK
35mm Lens: amzn.to/2zhXE7N
Lightweight 24mm lens: amzn.to/2ziTYCF
Camera case: amzn.to/2ZeTPPY
Secure camera backpack: amzn.to/2TYdxJU
Reflectix (the bubble stuff): amzn.to/2ZmLLvY
Gorilla Tape: amzn.to/2HnpYd8
Simple Green cleaner: amzn.to/2ZtjaoC
Storage bin for tent sides and top: amzn.to/2ZmeNHZ
Art show chair: amzn.to/31YVGW3
Art show booth lights: amzn.to/3ijaRnJ
Ramp for loading van: amzn.to/3go3GsU
Rolling storage bins: amzn.to/3sidn1E
Kettlebell booth weights: amzn.to/3CKrSAg
Dog Tie Stake tie down: amzn.to/36nUL9p
Rivets to make threaded holes: amzn.to/36brzCu
#kiteflying #kiting #kite

Развлечения

Опубликовано:

23 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@DanielDeRudder 2 года назад

Hi Evan, that GoPro footage from high up in the sky was superb ! I did have the feeling that the wind speed at that moment was at its upper limits for a delta kite to fly in a stable and controlled manner. A good thing you tested your kite and that you didn't lose your expensive equipment. Keep up the good work. 👍🏻

@EvanReinheimer 2 года назад

Thanks! The image stabilization combined with the horizon leveling feature on the GoPro does make KAV much smoother. The wind wasn’t all that strong, maybe 12 mph max. I’m going to switch back to the stock spreader for the time being.

@seewind 2 года назад

Evan - good stuff. As noted on the KAP forum, I use carbon fiber (SkyShark P400 and P300) tubes set up with the Dynamic Spreader (DS) configuration. I have had flight failures with the old two piece and the new 3 piece stock spreaders. I have ditched them all and swapped in the DS with excellent results for KAP with over 300 flights and no failures (due to the spreader). Like the high shots....the stabilized Go Pro video does a great job for auto KAP. Keep the photos and videos coming. WW

@EvanReinheimer 2 года назад

Thanks, James. I’ve never had a problem with either the 2 or 3 piece stock fiberglass spreaders. I was just trying to avoid the problems I’ve read about from your experiences. I contacted Mike about getting a DS and hopefully will have one in the future. For now, I’m going to go back to the stock spreader for this kite. Thanks for watching!

@tonynikon 2 года назад

Hi Evan, I have a Into the Wind 9’ Levitation Delta like yours. I usually put a long fuzzy tail to keep the kite steadier in high winds. You can replace the leading edge fiberglass spars for carbon fiber if you are looking to save weight in low winds conditions. Just put a solid 2.5” carbon fiber rod at the tips to reinforce the spars. I’d seen people cutting the upper spreader in half to put a dihedral spacer but it is actually not need it for the ITW Levitation Delta. The fiberglass spreader while a bit heavier than carbon has more torsion elasticity and can handle heavier winds than carbon fiber. Good luck!

@EvanReinheimer 2 года назад

I’m going back to the stock fiberglass spreader for now. Turns out the ferrule slipped because it wasn’t glued properly and cause the end of one of the spreader tubes to crack.

@eshrisewnarine2909 10 месяцев назад

Thank you very much, really appreciate your help. Remember to keep those videos coming, keep up the good work. Love to support my fellow New Yorker.thanks again.

@EvanReinheimer 10 месяцев назад

Thanks for watching! I have some new kite videos planned for the fall…stay tuned!

@Phuong.Nguyen- 2 года назад

Thanks for sharing another amazing video with pretty footages my friend :)

@EvanReinheimer 2 года назад

Happy to share. Thank you for watching!

@eshrisewnarine2909 10 месяцев назад

Hey Evan, what string do you recommend to fly a 16sqm tribolite kite. Can you explain in detail please thanks in advance. Note: love all your videos especially the ones on kites they are very helpful thanks again.

@EvanReinheimer 10 месяцев назад

You’d probably want a minimum of 200lb line, I really like using braided Dacron like this: amzn.to/3Zf20Yi they also make 300lb line if you want some extra strength.

@torontorc4637 Год назад

Great video, thanks for sharing 👍🏽

@EvanReinheimer Год назад

Thanks for watching 🪁

@joeybirdjose 5 месяцев назад

What’s stronger fiberglass or carbon fiber? Are ITW kites stock frames worth it? I purchased a KHK 9ft delta and the spine spar folded in the air after 10mins and the kite crashed. The spine spar was a resin rod. For 180$ I’m never buying KHK again. Also are the 5-25 mph wind specs accurate for KHK kites? Cause after watching mine fold 300ft into the air I was pretty annoyed cause it was a bit expensive for the kite to only last me 10mins and to be honest I couldn’t even get the delta to fly steady in the air for the 10 mins it kept swaying hard side to side crashing and the wind was only 15mph. What’s better carbon or fiberglass also what brand should I buy next? Prism or ITW??? Thanks yall

@anzaeria 5 месяцев назад

Ive just noticed that the colour scheme of this 9 foot Levitation Delta is different to the 9' Levi Delta seen in your other videos. I have the other colour version (different to the one in this video.) So far, my stock spars have held up fine except I had an accident with one of them just prior to my very first flight. I dropped it and accidently stepped on it. Well actually, there was another accident several years later when my Levi Delta crashed and one of the spars speared right through the kite, creating a hole in the ripstop material. That also resulted in a broken spar with the three piece spreader.

@chrisyerp174 Год назад

Nice flew my 16 footer at 5800 foot last year goin higher this year new one is being made 32 foot delta so excited I know at 5800 foot we couldn't see are 16 foot like just line

@EvanReinheimer Год назад

That’s wild!!! Do you have video of that??

@chrisyerp174 Год назад

@Evan Reinheimer I do but all you can see is a line goin into the atmosphere want a buy a go pro and make a rig for it just havent done it yet my 9 year old son is excited for this new kite being made he said when does my new kite get hear just yesterday

@EvanReinheimer Год назад

@@chrisyerp174 amazing! Let me know when you do this!

@chrisyerp174 Год назад

@Evan Reinheimer was talking to the builder today thay almost finish btw I was wrong its not 32 foot delta , It's 39 foot 12sq

@jamesgentry2018 2 года назад

Love your enthusiasm for KAP. Was your joint for the carbon spreader close to the middle of the kite? That's usually the trouble spot.

@EvanReinheimer 2 года назад

Thanks!! No, I made a 3 piece spreader. Turns out one of the ferrules slipped and caused the end of one of the tubes to split.

@jamesgentry2018 2 года назад

BTW I did the Art Fair circuit as a furniture maker for 30 plus years mostly upper Midwest and East Coast. ACC shows were a mainstay. Not an easy way to make a living but it can be done. It was certainly interesting and provided a lot of independence. Best of luck to you.

@andrewdutton3831 2 года назад

Cool video. Was that your GoPro 9? Or did you get the 10?

@EvanReinheimer 2 года назад

GoPro 9 with the horizon leveling and boost turned on.

@nicksavage4763 2 года назад

GREAT SHOTS, REALLY GOOD💥 ARTIFICIAL DRUMS ARE JUST IRRITATING and NOT GOOD For the VIdeo

@Sophia.-mu9vh 5 месяцев назад

I remember durning late spring my dad taught me and I flew it so high

@ClintHalliday 2 года назад

Was it because the spar joiner was too small??

@EvanReinheimer 2 года назад

Close…the ferrule (joiner) slipped and splintered the end of the tube. Lesson learned.

@techparistech2659 2 года назад

Great 👍

@EvanReinheimer 2 года назад

🤗🪁

@breinertorres5607 2 года назад

Where to purchase this Delta?

@tonynikon 2 года назад

Into the wind in Colorado. They have a website. Do not buy the same model from Emma Kites on eBay. While cheaper, the cloth was brittle and the weight unbalanced. If you plan to fly it in heavy winds, I recommend a fuzzy tail to make it steadier. Mine is a 9’ model with a black and white tail to match the kite and it looks cool in the air. Good luck!

@SuperSteven1969 3 месяца назад

Have you tried Syclone pole by Easton...?

@hedonist2104 5 дней назад

@SlavaPonezha 2 года назад

Hi man :) what was your height record? I wonder if kites can be used for military surveillance instead of drones. Imagine we can get a night-vision camera up to 1000 meters and monitor enemies from the sky for HOURS without worries of the battery getting flat(drone). I guess threaded drones can be used but it is gonna be expensive VS using kite that is much cheaper...

@anzaeria 5 месяцев назад

I would imagine that the battery in the night vision camera would go flat if the kite was up in the air for hours.