Another good video, you seem to be getting better in the commentary on these video's too, always enjoy watching them, just got my ST back from the engine rebuild, looking at a decent suspension set up now, so may be getting in touch with you for some advice and recommendations on what you could supply if that is something you could do?
FRANSPEED thanks; it’s a hard job to strike the right balance and seem like it’s not scripted. It never is but can sometimes sound that way lol. Let ya know if we can be of help, and as always, thanks for the positive comments 💙
Thanks for the continued support, feedback and the comment. You are one of the many that have supported on each video. It really does make it all worthwhile 💙
Great content again, always wanted to see stage by stage of the rs convention on the st, top guys! I’ve heard you need the rs oil feed and return pipes as well because there St once don’t fit is that true? Love the Channel 🤘🏼
Ryan West thanks for the feedback; we really love making the content. You do need the feed and the return; they are different from the ST version. You will see in the next video so keep your notifications on 🙏
ST Yusuf to be honest this is an easier job for us; production wise... Rather than speaking to the camera- which takes two extra people to film! We may switch it up a little from time to time but will probably stick mainly to the commentary method. Really glad you are enjoying the content. Please feel free to comment what next! Stay safe 💙
BD Performance info on driveshafts/ process of replacement as I’m just about to have mine replaced. A vid regards getting the best out of a standard turbo and best mods to do that.
ST Yusuf that’s an interesting one. Not sure on the driveshaft replacement but we can try; it’s a little hard to show play on a car or even off without the shaft being totally ruined. Thanks for the feedback though 🙌
Has this had the rs pistons an forge block. Asking as im wanting to put a rs lump in my st. an wondered what would you do to my st engine to mske it an rs
Hi im currently in the middle of the rs turbo conversion,I have a rs check valve but it doesn't have the smaller tube that the rubber hose goes on can these be removed from the st check valve?
Hi guys, is the section where the turbo to crossover pipe fits on the same diameter on both or different on each of these turbos? I have the ST with its stock turbo and I’m looking to fit the RS crossover but the original turbo to crossover pipe is too long so would purchasing the RS turbo to crossover work?
My car has a bd performance badge on the back would love to know what you’ve done to it? It’s also got trp badge on, but none are what’s on it now as it’s Dreamscience at the mo looking for more power now....
Call the office or send us a DM on socials with the Registration Number and perhaps we can assist. Thanks for watching the content and if we can help with getting more power then please do let us know 👌🏻
Dave chose to stick with the tried and tested REVO Software. He was already on Stage 2 of the ST Version. There are very many options but to move to RS Software you will need the supporting mods and sensors ie the MAP and MAF sensor; which often leads to changing other parts too. For more information see the relevant packages on our store site, or alternatively give the Team a call on 01978 758598 🙌
Good question - new we have seen them achieve circa 420-430bhp. It does depend which management you are using - we achieved 420bhp on Nick Wiley's RS Turbo with REVO - Devils gained 10bhp on Syvecs. Both outputs were measured on the Devils rollers so gives a good comparison. Hope that this helps and thanks for the question.
@@BDPerformanceWrexham thanks, I've just bought a mk2 rs and thought they maxed out around the 400 mark, mines being mapped next month with just a full exhaust and air filter, nothing crazy, just looking to keep it nice and safe about 350-360
Gentleman's i just arrive and subscribe u guy's BD Performance. I'm from Portugal and lost my vw polo gti on big crash , now i'm stuck on a focus mk 1.5 2002 1.4 16v and this is daily for my whife do 15/25 km day . Decide to keep the focus for me and buy a toyota avensis 2.2 wagon diesel for her . My question is what motor can i fit on mk1.5 to put a smile on my face . There's not mutch st 170/ or mk2 225/rs here and i had 2 mk3 xr2 i fiesta in 91/93 . Whould u please help me and give u feed back please . Thank u
Wow what a question! Anything will fit anywhere with the right amount of knowledge and work. It depends on your budget... Why not try a ST150 engine? Lots of fun with some cams 🙌
@@BDPerformanceWrexham from a mondeio mk3 ? There's not as much st 150 fiesta here . But i can find a 05/06 mondeo 2.0ltr for sure . Budget around 10/12 k€