Fooocus 2.2.0 Update - Prompt Array | Metadata | & More! (Stable Diffusion) 

Wow... such a kind and generous comment, how can i refuse? 😊

Assuming this is on your computer and not the colab? is it still working just taking longer? If so sounds like the Vram is being used up. Or does it stay stuck? If it stays stuck it might be a file path error, might check the cmd window and see if it failed to load model.

The way stable diffusion works, It wont be able to transfer the exact details of an item into an image without some work. I have seen others create a LoRA based on an item, but that might not be efficient if you have multiple items. Another way which is easier with certain products, maybe not clothes. Is taking a good image of the clothes on someone else, and then basically using the inpaint and masking everything else but the clothes themselves and generating a new person wearing said clothes. Obviously this is locked to the lighting and shape of the original image but can work. Products that can be set on a table or simple wearables (like a purse) can be done easier this way.

yes! It's a bit hard to find at first but go to advanced>Advanced tab>check developer debug mode>in debug tools tab scroll down till you see "Forced Overwrite of Sampling Step" and put in whatever steps you like. -1 will put it back to auto.

I have an NVIDA 4070 TI 12gb GPU. AMD GPUs struggle a bit since stable diffusion was made for nvidia architecture (cuda) but there are some workarounds You can check out the developer discussion page to see some methods like here: github.com/lllyasviel/Fooocus/discussions/488

hmm, is this the local version or the google colab online version? I think the online version doesn't save the outputs once the session ends. So you need to download them before you quit. If this is on your computer I am not entirely sure. Did you change the output path at some point in the config.txt?

@@JumpIntoAI Thank you I found today and yesterday's output folder in the downloads folder for some reason (local)

Elevenlabs. But it probably sounds good because I've been using my actual voice more now and spot checking with the AI synthesized version when I can't record and need corrections. Trying to move away from it entirely.

Damn I didn't know it was AI voice! 😍

try redownloading the zip file perhaps? Fooocus is its own entity but it can share the models you have already downloaded with automatic 1111.

This shows how to setup a turbo preset: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cCS_pBdh7ko.html This shows how to do a lightning preset: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DRcxsqnhjws.html But can be used to make any preset you want.

You can use any SDXL 1.0 checkpoint, find one on CivitAI and download it to your Fooocus\models\checkpoints folder

Sadly no, just the built in face swap.

No need to do anything. The bat file should have the update arg by default "entry_with_update.py" So it checks for updates every time you start it.

I don't think any animation type features will ever be added directly. One of the main features of Fooocus is it's light VRam requirements. Adding anything like that would bloat the requirements beyond majority of what the average user has. But It's best to think of it as one step in the workflow. I create my images and inpaint as needed and use those images in my Animatediff/SVD projects.

Yes! you can use any SDXL model as a base model and any SDXL and sd 1.5 as a refiner. Just download them and put them into the fooocus\models\checkpoints folder.

in the fooocus\outputs folder, in there it will be folders separated by date

I agree! The want for creating "models" overshadows a lot of the other capabilities of SD. There are even some amazing tools coming out recently like Layer Diffusion for Forge. www.reddit.com/r/StableDiffusion/comments/1b1w6tt/transparent_image_layer_diffusion_using_latent/ Of course it is gated behind having to use Forge. But something to check out if you haven't. I have a couple half finished projects and one is for logos. It's just lack of time that stops me.

What is public link? You mean colab notebook? It works fine, been using it for month

Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DRcxsqnhjws.html

hmm. It should auto update when started. Do you have it installed locally and are you starting it through one of the run.bat files?

Sadly, Stable diffusion can't transfer specific items especially with logos into a scene without manipulation (photoshop) and or creating a LoRA for that specific item. There are ways to get products in a scene with stable diffusion but wearables like shirts are the hardest and need the most pre and post processing. Eventually I will get a vid out about this to explain better.

Do like that [[sun,water]], [[night, fire]]

if you use coma as you said it will not count () and take 4 elements in array. you can use wild cards now it has feature so it will read wild card in order or for small prompt you can just use 'and' like [[ sun and water, night and fire]] so it will generate 2 images in total

What operating system and GPU do you have? This does have some requirements which you can see here: github.com/lllyasviel/Fooocus?tab=readme-ov-file#minimal-requirement

There is no way to know before it's released. But we can hope.

The run.bat files have a command line in there to check for updates every time you start it. So should auto update.

Yes, this can create any of those with the right prompts or styles selected.

are these changes in a preset json file or the config.txt file? If using a preset in the command window at the top do you see it saying something like "Load preset C:\Fooocus\presets\custom.json] failed" ?

​@@JumpIntoAIThe problem was of course a comma before the added lines, so after closure of previous section by a square bracket... Sorry for trouble...

Motion Array! But I understand your pain. I apologize

@@JumpIntoAI Nah it's fine, it's on me. I spent waaaaaaaaay to much time on generic music platforms over the last few years for corporate videos soundtracks. I now have a kind of trauma when I hear it, they sound all the same 😅. That said, the content of your video was good enough for me to quickly ignore it, which is saying a lot!

you can add /?__theme=dark to the end of the address bar. like 127.0.0.1:7865/?__theme=dark If you are running it locally, you can add --theme dark to the run.bat like this to always load it that way: .\python_embeded\python.exe -s Fooocus\entry_with_update.py --preset realistic --theme dark

You can use your own resolutions, the ones presented are because of how the sdxl models are trained and those odd measurements are there to get the best results. But! you can put your own custom size in if you wish. go to advanced tab>developer debug mode> scroll down to the lines "Forced Overwrite of Generating Width" and "Forced Overwrite of Generating Height" and put any sizes you like.

@@JumpIntoAI Thank you so much! this has helped me. Do you know where I find the buttons in the program to use embeddings?

@@MarcoEscobedo10 embeddings use a prompt, for example if you are trying to use a negative embedding like civitai.com/models/148131/ultimate-text-embeddings-sdxl-pack-styles-negative you would download that to embedding folder and then in the negative prompt type (embedding:ac_neg1:1.1)

Yes, it checks for updates every time you run it.

@@JumpIntoAI ok, thanks

There is a Colab version on the developer page. colab.research.google.com/github/lllyasviel/Fooocus/blob/main/fooocus_colab.ipynb Keep in mind most advanced features will cause memory to run out if using on a Free colab account.

@@JumpIntoAI thank you so much ❤️ but it still old version 1.12.2 🥲

@@dongytuetinh I think thats the git install version at the top, that colab is updated to the 2.2 version of fooocus. checking myself, it says in the command lines Fooocus version: 2.2.1

@@JumpIntoAI thank you so much ☺️

edit one of the run.bat files and add the line --always-cpu after Fooocus\entry_with_update.py so it will look like this: .\python_embeded\python.exe -s Fooocus\entry_with_update.py --always-cpu

@@JumpIntoAI I already did that, but in cmd it says system cannot find the path.......press any key to contiue.

But why?

@@eveekiviblog7361 On my 1050 Ti it is very slow, So I want to try it on my i5 13400F, the method --always-cpu not working for me. I tried several times, but it give me "the system cannot find the path....error.

@@hanynagy8969 sounds like a path is missing or in there incorrectly, one misplaced comma or a capitalized letter can mess things up, without knowing a lot more details it's hard to help. But if you copy your command window text and create a post on github.com/lllyasviel/Fooocus/issues It would be easier to help.

lol, well in this the point was to use the same seed using the new array support so it will look similar. But in general short undescriptive prompts will end up like this. And sometimes the default fooocus styles lean into portraits. Better Prompts and pyracanny/CPDS poses is the way to go.

Right there with you on that, especially painful when you do everything in one long mouse click and mess up at the end.

That's exactly what I'm talking about buddy. It also would be nice if they let you manually change the dimensions in the outpaint (top, bottom, right, left} instead of having to use the default dimensions. I've been trying to send Illyasviel a suggestion or request on these matters. But I'm new to this Github stuff. Do you know how to send a message in the github web site? I'm registered,but how the heck do you send a message (discussions, pull request, issues etc. etc.)????? Thanks for any feedback my friend.

@@neonxp99 I would go to the discussion page on github: github.com/lllyasviel/Fooocus/discussions and post there with "new discussion" . Mashb1t is an incredibly active mod/collaborator there that could answer those questions.

Mission Accomplished : - )!! Hopefully they will address these issues soon. Thanks for your help my friend👍✌