Тёмный

Ford 6610 workover and full service 

Waterfall Farm
Подписаться 2,7 тыс.
Просмотров 4,6 тыс.
50% 1

in this video i get a job from my Neighbour to service his newly obtained Ford 6610 and to get it ready for work. I had alot to do to this tractor so unfortunately this has become a 2 part video but stay tuned as part 2 I'd coming soon!
Follow my Instagram for more content
www.instagram....
@Waterfall_farm133
#farmequipment #fordtractor #diesel #repair #ford #ireland

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@olivierfulcrand6841
@olivierfulcrand6841 8 месяцев назад
FORD IS GOLD 💪👌👍 SIMPLY THE BEST 💪👍❤️
@waterfallfarm5408
@waterfallfarm5408 8 месяцев назад
Glad to see someone agrees with me🤣 give us a follow more Ford's coming soon👍
@JTsvintagechainsaws
@JTsvintagechainsaws 9 месяцев назад
Nice tractor I have a 1988 ford 4610 ford is built like a board Tough as nails
@waterfallfarm5408
@waterfallfarm5408 9 месяцев назад
Oh that they are indeed just give them a small bit of love and they'll take all the abuse and stay going old stuff is just gold
@SAB_Agri
@SAB_Agri 7 месяцев назад
Good looking 6610. Not all of them had coolant filters and is that IAT coolant? 🤙🤙👍👍
@waterfallfarm5408
@waterfallfarm5408 5 месяцев назад
Thanks for the comment yes it is IAT coolant. The coolant systems are the weakest part of the old ford tractors but as long as it is drained and flushed often it isn't a problem
@creyly8326
@creyly8326 5 месяцев назад
I know it's probably late but you should also put engine oil in the injection pump. Large 1" nut on top to fill and 1/2" level bung beside the primer pump you took off
@waterfallfarm5408
@waterfallfarm5408 5 месяцев назад
Thanks for the advice I will recommend to customer next time it's in for work!
@wout4151
@wout4151 5 месяцев назад
can we get part 2?
@waterfallfarm5408
@waterfallfarm5408 5 месяцев назад
Whenever it's back for more work I'll be sure to make a part 2 😅
@riverlad9561
@riverlad9561 12 дней назад
@@waterfallfarm5408 when you changed the main hydraulic filter on the right side of the tractor behind the rear wheel did you have to drain all the fluid? I have an 88 6610 Series II and I want to change the filter but I’d prefer not to drain all the fluid.
@waterfallfarm5408
@waterfallfarm5408 11 дней назад
​@riverlad9561 you shouldn't have to drain the back end oil that's coming off the pump to my knowledge and shouldn't drain anything when you take it off except for what's in the system. If you do have to drain the easiest way it to plug in a hydraulic hose and pump out untill it runs dry then immediately shut the engine off and you should have 95% of your oil out to make your life easier. Hope this helps and thanks for watching
@Clar_-go1ps
@Clar_-go1ps 2 месяца назад
Very good !!! Thanks of France !( Ford 6610)
@andyg2959
@andyg2959 5 месяцев назад
good job 👍
@richardthompson420
@richardthompson420 5 месяцев назад
Nice good sounding tractor. I have a 85ish Long 610 (romania build) that I'm told is a sister tractor to the Fords. I'm dealing with blowby oil after warm up. Not sure if the atf/diesel approach is worth it or just split and rebuild. Ever experience dealing with blowby? I'm considering just running a catch can when I need to use it. I hope you fledgling business takes off. Looks like you got the garage for it.
@waterfallfarm5408
@waterfallfarm5408 5 месяцев назад
Hi there thanks for yer comment I appreciate it. Well blow by is a failure of the piston rings and is when compression is getting past the piston and goes down into the sump the blow by relief is normally on the top of the engine rocker cover so as to let the pressure out but not to leak oil. I would recommend running a compression test first to see what kind of compression you have and after that depending on the setup of your yoke you might be able to remove the oil pan/sump and remove the pistons that way. I would recommend doing the head gasket at the same time while your doing so much to it already and while the head is off get it Plained down to level I always do this for good practice and that way I know my new head gasket is getting a good seal. I hope this helps and thanks for watching hope to see you back again soon
Далее
Ford 6610 fuel issues fixed.
13:25
Просмотров 456
Farm chores in  -2°C
37:52
Просмотров 1,8 тыс.
ОБЗОР НА ШТАНЫ от БЕЗДNA
00:59
Просмотров 242 тыс.
Это нужно попробовать
00:42
Просмотров 336 тыс.
Fitting a loader to the Ford 6610
11:58
Просмотров 990
Hyd Fluid Fill 5610s
2:34
Просмотров 3,4 тыс.
FORD 6610 AND HOWARD ROTASPREADER
7:48
Просмотров 3,2 тыс.
Ford 6610 Baling with Claas Markant 65
7:01
Просмотров 10 тыс.
Hard Starting Diesel   Geared Starter Upgrade Ford 6610
13:40
New Tractor? Why is there a Valtra? Whats going on?
13:51
ОБЗОР НА ШТАНЫ от БЕЗДNA
00:59
Просмотров 242 тыс.