Ford Cosworth's Engine Stripped Out To Access Faulty Cylinder Head | Wheeler Dealers 

Love these old episodes with Edd. My hat goes off to Ant but the series isn’t the same without Edd.

I haven’t watched Wheeler Dealers since Edd left either. And when I did watch it, I used to record it and fast forward through the Mike bits. What Edd does is truly fascinating and for the life of me, I can’t see why he doesn’t have his own show. I’d pay for that in a flash.

They sabotaged their show....Edd was the reason why mass watched the show. They even tried to run it with Mike as stand alone but then it went to new low 😂

Haven't watched wheeler dealer since Edd left...not the same

WD in its heyday before the Yanks messed it up

Really enjoy watching Edd!

Edd was so informative and made any mechanical task so easy while keeping himself clean ...very classy

Gotta love how they still post videos of Edd..

Edd the king of engineering, My favorite drimer car😉😉😉😉😉😉

I miss the old show. Not too fond of the new one, which might be done now. I haven’t seen an episode in a while.

It's always good to see you, sir!!!! just sayin

And up pops Mike's Carnival Barker head trying to sell You on the WD Series without Ed. Shameless.

What they didnt tell you was the real way to check if its rings or valve seals.. pull plugs, do a compression check. If you have a low cylinder, put a splash of oil in, then recheck. If it goes up you have bad rings. If not then your issue is in the head. OR if its just the smoke it could be a leaking oil seal in the turbo. So much info left out...

We not gonna talk about how this Cossie was broke for parts about 18months after the episode originally aired.

Would say one if the best engines made

I can imagine Edd creates his own Top Gear . 😀😀😀😀

EDDS THE MAN

Good to see you on any show!! just sayin x2

Hi Ed, where is Mike...., I thought that you both is Team..isn't it? What make the vid is interesting, there are Business too ; Buy, repairs and Sale. That's Fun man...Sorry the vlog for only car repairing was plenty in youtube. Hope you both back as Old session. Wheeler Dealer show. Thank's

Wheeler dealer has had its day, you only have to look at american Mike to know good bye

Anyone know the season and episode which this is from?

My gradfather has '88 Sierra 1.8 CL (Pierburg carb.). Car has no heating, while flow through heater core is normal and flaps work. Help please.

I call the spinner trick “Daddy Magic.” One of those tricks my dad taught me.

Only thing I’d say is it’s much easier to keep the turbo and inlet manifold bolted to the head and remove in one then strip it on a bench

ok. đúng rồi kỹ thuật hàn tốt thì không vấn đề.

Как интересно было смотреть за Эдом!

how do you get the next part of this ???????

Ed China is the undisputed Automotive ZEN MASTER.

Hola alguien puede traducirlo al cadtellano soy fanatico tuyo🙏

Why not use Paul all the time. Seems he's just sitting in the corner anyways.

The sierra still blew out blue smoke on the drag strip at the end of the show so there was still another issue maybe a worn turbo or blocked breathers possibly even rings on the way out

Was This Left hand drive or right hand drive

I still remember the engins were small in the 60s and early 70s

Seriously, Edd? You should have done a leakdown test to determine where the issue was before taking the head off. Every time one of these gets posted, I get my hopes up that Edd is back....

So it’s had a recent rebuild but they didn’t bother replacing the stem seals?!

El tutorial es execelente pero nose nada d igles

ah eski günler

nhiệt từ động cơ đốt trong và bếp ăn làm ảnh hưởng... vẽ rồi mà

For me wheelers died when Ed was pushed out 😢😢😢😢..

Big Edd is sadly missed on tv now. This show used to be brilliant until Mike the back stabber put money before friendship and quality programming. WD’s is diabolical now, no disrespect to Ant.

6:45 Instructions not clear.... how do I rebuild my head Edd? If i remove my eyes i wont be able to see what I'm doing? Also if I remove my brain will i still survive? Could I rebuild my head in the shed or is a clean environment essential to prevent diseases when I open up my head? Also should I ask Paul to give me a hand? Or a ear? Ed rebuilding a head, I think certainly Nose what hes doing.

yep .not the same .since he left wheeler dealer.

I miss Ed

He said big Turbo. Where ?! :)

We want subtitle in Turkish ... ☺️☺️☺️

or of course the most likely scenario with a Ford could be the fault, the valve stem oil seals. no need to remove the cylinder head on most Ford engines as theres usually a tool to change the seals in situ. either this was all done for the sake of TV OR they already KNEW there was other issues.

Edd is the man, new episodes suck ....

1:01 THIS IS MEDIUM AT BEST. MASSIVE INTER COOLER MEASURES 800X400X100MM

6.14 I thought he disconnected the battery?

Edd vs Ant 🤔🤔🤔🤔

valve seals, use synthetic oil, pcv valve.

Edd always reminds of Tom Baker for some reason.

I thought god not another car video then I saw Mr China and watched it in its entirety was kind of disappointed when it finished so quickly.

Is it me or did he do a respray from blue to red while he was farting about?😃😃

I have a white coswort -92 BUY?

How the hell does Edd get his hair to look like that ?

Need more lightning in the video cant see anything...

valve seals, not guides!

First time watching the show but if he even suspected rings why didnt he just start with a compression test, would have ruled out rings right awat

Anyone missing Paul?

Before i even get a minute into this,im gonna say rings because its a cosworth,its boosted, and prolly owned by a college kid previously so ya,rings def gonna need to be done

Good evening really one of your biggest French fan we would like the voiceover in French and the really you would have in addition the 66 million French that would follow you good evening

It's only a pinto block its an easy job.

Arabanın aralası aynı e 30

All that uprated Pinto ever did was burn oil 😂

And in the end, it was only a faulty turbo.....

I click on anything automotive with the words "cosworth" in it.

Edd China: Removes Cylinder head in 1 hour. Me: Spends 20 minutes looking for lost sockets. Can't undo hose clamps as they're really fiddly. Rounds off a nut and have to grind it off. Grinder slips and damages other hose. Coolant spilled all over driveway. Falls of on slippy leaves. Reward self with cup of tea and biscuit for achieving 2% of the job.

If you added labour costs into the costings, the car made a massive loss.

Best part is you only get 10 minutes of the show showing Edd at his best then a message from Mike asking you to subscribe, It's Mike that is fleecing people getting revenue from this scam. Suggest you don't subscribe.

Turkish dubbing please come

That's what money does to you there's no friends there's no family only dollars

I Bet Edd isnt getting any royalties from them uploading old clips, hanging of his coattails since they cocked it up

👍👍👍👍👍👍👍👍👍👍👍👍👍

dam edd is going to send it ant to get it fixed

Im so proud of my self dlthat i can do this in one day , im literally proud, with 18 yo

You guys know Edd was the reason for WD's success. Not Mike. (well, maybe a little) Not Ant. (not at all) Edd.

In this video we learned exactly nothing

Edd China the Jamie Oliver of cars. (Brewer more like Kim Jong-un)

Turbos are steroids for cars. They will give you power at a cost of longevity.

The most copied engine design on the planet....

First

Why would anyone dump money into that junk car

Reading comments on how people miss edd I don’t understand he isn’t any better than ant edd is a boring person