Ford Escape/steering column removal(nut and bolt) with installation instructions.

Подписаться 120 тыс.

Просмотров 34 тыс.

50% 1

Attention attention!! If your steering column needs to be removed in your Ford escape because your key will not turn in the ignition lock cylinder!!! On another video I made I show you how to do this without removing the steering column!!
• Ford Escape ignition k...
In this particular video I’m removing the steering column out of a Ford escape 2001 to 2007 I also describe to you how you can change out the steering column without reprogramming the key as long as you still have your old key. I hope the video is helpful and you get her done God bless and have the best of days!!
You should watch the whole video .(sometimes I’m fun) So you can inform yourself with all the great information that I put in my videos and God bless. I hope the videos helpful for you!
And Thank you for viewing!
Have a great day
“You can’t really break it if it’s already broken!”
Please subscribe!!!
if you want to reach out to me and get a message to me hit me up on clays ac and auto repair on the facebook And if you have any questions it’s easier to message me straight through Facebook
Why should you Subscribe to my channel ? I constantly make these videos that show you how to use your tools and show the techniques that we use in our auto repair shop every day. And all it does is help me send you stuff . I do not sell your information I do not solicit you. all it does is add a couple 100 thousands of a cent to me . And it cost you Nothing ! you would only be helping me . And hopefully i was able to help you !! So please be kind and enjoy!!
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@zula8159 3 года назад

Came here to see exactly what they’re doing to my car. They told me I need a whole new steering column. I just replaced the rack and pinion myself and the whole steering unit failed me. They told me 800. Cool saved a whole paycheck. Now they’re telling me the USED part fell apart and now it’s going to be a few more days after I’ve already waiting 2 weeks cause it was Christmas. I’m on the verge of doing this myself but imma end up messing it all up. Thank you for your very instructional video. How long did this all take? They told me 4-5 hours of labor.

@sharpcarco 3 года назад

First off there is certainly a possibility that you could not tighten something down or make some kind of mistake but that would never stop me from doing it because if anybody else can do it you can do it to. I just wanna make sure that you mean they are replacing the steering column? It could possibly be 4 to 5 hours for certain people but not skilled professional I would doubt if they are only replacing the steering column I wouldn’t think it would take anywhere near that long to replace for a professional ..... it certainly would not for me. I’m a jack of many trades but the master of none.

@concreteskydiver 2 года назад

You're pretty good speaker nice motivational emphasis! I'm not sure about you are stroking the shaft on that car so much but other than that it was great lol. Subscribed and liked!

@sharpcarco 2 года назад

Thank you very much Bryce welcome to the channel and we’re happy to have you. Lmao Often I do that in the privacy of my own home or bathroom….

@rubenr4573 4 года назад

Pretty cool Instruction class.

@anthonyiwuoha5089 4 года назад

Thank you great service Man

@sharpcarco 4 года назад

You’re very welcome thank you for Taking the time to let me know I greatly appreciate it

@anthonyiwuoha5089 4 года назад

@@sharpcarco 👌👍✌

@haroldmaitland2272 Год назад

I have a 2008 ford escape had a power steering asist on dash has no power steering can hardly move the steering wheel. I put a used complete unit from the salvage yard. Does the used one need to be recalibrated ?

@sharpcarco Год назад

No it does not it should be plug and play

@jonathanbailey1509 2 года назад

I took my dash out got it back in, just can’t get the shaft all the way in to put the screw to secure the steering wheel shaft

@sharpcarco 2 года назад

So what you wanna do is you wanna take a screwdriver and priy the jaws apart a little bit this will allow you to slide it onto the shaft and then allow you to be able to get the bolt back in there sorry I answered this earlier but I must not of had very good Internet

@Lj-ks7oe Год назад

took out dash to change out leaking evaporator and replaced the heater core, fan motor and flapper doors controls so I would not need to do this again. Problem came on reinstalling dash. the steering assembly is holding the dash about one inch out of home position. Being old restricts what I can reach and see. Have tried removing the steering assembly. BUT CANT GET TO the upper bolts any ideas? I am sure its the male spline shaft not sliding all the way into the female spline shaft

@sharpcarco Год назад

I’m really sorry I would love to help you but this is probably the last time I did that job and I know this is a couple of years old. I thought I made a nut and bolt video on removing the steering column, which I actually am fairly certain that I did is this not a steering column removal video?

@leeannflake9 3 года назад

Do you know how you would disassemble the alarm system on the Ford escape it won't stop going off it's ran three batteries down ever since my husband died it's been doing this

@sharpcarco 3 года назад

Is your remote for it , factory ? ( meaning it will say ford on it?) Or is it aftermarket? What year escape ? Quicker responses over my Facebook , clays AC and auto repair, pm me

@juliobattiste2420 2 года назад

How do you remove the last bolt at the far bottom that gose threw to the knukkel .

@jakeferreirafamily Год назад

Hey man i think you would be able to answer this ive been trying to figure out what the heck is behind my blinker stick, i have a white button that presses and depressed but doesnt seem to do anything… any idea what this is im at such a loss and noticed yours doesnt have it

@jonathanbailey1509 2 года назад

What can I do to get the shaft to go down more

@sharpcarco 2 года назад

Well you wanna take a screwdriver and spread apart the end of that so it’s bigger so it goes down on the shaft that’ll allow you to get it on easier. At least that’s what I think you’re talking about

@Mike_The_Hog_A_Nator 4 года назад

Damn Dealership wants to charge me $2200 for the 09' steering column replacement. They already charged $400 for the steering torque sensor

@sharpcarco 4 года назад

Well the 2009 steering column is just a little bit different than the 2002 I was working on in this video but if you have a little bit of common sense you should be able to disassemble the parts you need from a used steering column and put them in your old one. So you don’t have to reprogram the key I’m gonna be making a video on the switch that goes defective in the steering columns within the next couple of months But hopefully this video inspires you to give it a try you can’t break was already broken

@MelodyJuneInPa 3 года назад

Does this gen of Escape have tilt-wheel? Asking for a friend who bought one used.

@sharpcarco 3 года назад

Some of them do yes

@johnqueen2754 3 года назад

Can the Mazda steering column replace the Ford? Looking to pay a good goose egg

@sharpcarco 3 года назад

Yes it can.I’m 99% sure

@johnqueen2754 3 года назад

You can find them on the cheap with blowed motors. Got a few of them.

@elpiojohernandez2741 2 года назад

Put some oil in the key first Mexican style

@nv-slim4779 11 месяцев назад

Doesyxhiw how to remove the steering.

@MoeLarrycurly1 4 года назад

😊😊👍🏼👍🏼

@darlinlubin7396 3 года назад

What was the reason why you change it

@sharpcarco 3 года назад

It wouldn’t start it had a security problems

@sanchfire 3 года назад

Oh .. man do i not want to do this..

@MyersJ2Original 4 года назад

the part where you say the 2008-12 is slightly different is way wrong, WAY wrong. Its electric power steering. EVERY part is vastly diffrent (and the EPS breaks, allways :( )

@sharpcarco 4 года назад

Well I was saying that off of memory I’m certain that there is a possibility that I am incorrect it’s happened many times in the past.

@mainerockflour3462 3 года назад

OMG! Boy, didn't you go round-Robin-Hood's-barn. You managed to take apart the entire frontend, but failed to show what the hell why the key wasn't turning.😠

@sharpcarco 3 года назад

Well somehow you manage to run your mouth and not listen to me run mine , if had you would know that I made a separate video on that lol

@mainerockflour3462 3 года назад

@@sharpcarco Thank you for responding, but how do you think someone could have frigged with the ignition and jammed it up? I don't see any adhesive in the key way and everything seems to be where it should be topside on the column???🤔