Ford FG - FGX Turboside Intake and Battery Relocation Kit Install - Mackielec Industries 

ive had my kit on for 3 years now. it still makes me smile every time i drive it! best kits available 👍👍 Also, mines that old it came raw! not painted haha. painted mine up at home before fitting the kit 😂

Just brought mine tonight, wasn’t sure if I should go with ANTZ or Mackielec, I’m glad I chose you guys, will be a returning customer.

Iv got my kit all fitted in my fgx. The battery tray was a bit flimsy with battery installed. I made up another leg and welded it to bottom of battery tray and it bolts down into a nut sert I put into car body. Looking into engine bay I added the extra leg to bottom of battery tray in the back left corner because the battery could rock a bit on an angle back towards the inlet manifold. It's solid as a rock now. I have a standard size battery and once all fitted there is next to no clearance between front corner of battery nearest indicator and the other side by air con pipe. About 3mm at front and 1mm by air con hose. Measure, measure, measure before you drill holes. Sit battery in tray before drilling holes and get clearances right. The fgx may have less room than fg models.

I have a fgx xr6 turbo and had the airbox upgrade and the battery relocation package done on my car..All I can say is wow, awesome. For the money I paid I was so happy. So that is the first upgrade, 2nd upgrade is a turbo gauge using the blocked hose from the first upgrade. Easy as,and who doesn't like a gauge.

Decided on the mackielec kit because of zacbaldy, just a bonus that you guys also have a channel showing your way of installing it

Your're a champion. Your video helped me sort out the power steering switch issue as I have a 4 inch inlet pipe. Been through a few switches, one set of lines and had several leaks. All I had to do was bend the line down. Cheers.

This is without doubt the best battery relocation video I have seen, very well presented and explained

Brilliant video mate :D

Ordered your kits the other day can't wait for it to show up it's gonna be sick

"These are bloody grouse" ;)

Bro u need to give more explanation into the process of the cables.

i bought the relocation kit off these guys as well as following this video for guidance.. all i can say is Fucking Awesome!! so happy with the results and the video was easy to watch and easy to follow along! thanks heaps il defs be spreading the word 👌👌

While the kit looks easy to install and smart looking why have XR6 graphics cut into the top maybe a sticker but sucking hot air through the cut out

can you do intercooler install and piping? what about turbo oil feed line

Hi mate. Ill be installing one of your kits tomorrow andI was just wondering what do i do if i want to continue using the BOV after removing the factory airbox. Do you keep it on the throttle body after removing everything else? Bit stumped as you as you stated removed yours. Thanks👍

Killa video mate!

Do you have the turboside intake and battery relocation kit for 09 territory turbo?

Just installed mine got poor idle near stalls when coming to a stop have I most likely got a pipe not done up tight enough? Should it just run as normal ?

You guys make some cool stuff! I think you guys should develop a cold air feed duct like the stock one over the radiator only bigger that feeds air into your turbo side airbox. That would be awesome.

Put this on my mk2 and now I got a system comms fault :(

Hey Mitch, is there anything else you can put instead of that black stop for the BOV block? are you aware of something else that’s more robust? I notice over time they crack from heat etc..

Hi mate I have a 2012 mk2 xr6, and was told to be carefull when removing my battery to change my headlight globes as some people have experienced ICC problems after battery removal, are you aware of this and do you know the trick to either fix or prevent.

Yo! just ordered a kit just wondering what size drill bit and inserts you used looks way cleaner being able to bolt it down

Do you make these in 3inch as well?

Can you laser cut G6E TURBO instead of XR6?

Hi mate do your intakes work/fit with Plazma and PW Intercooler kits ?

Where are you getting the cold air intake from?

Thinking of buying one of these mitch, do i have to block my bov?

Tossing up between the Mackielec or the Antz for my BF xr6 turbo. Still cant decide which kit. Will it give my car the dose flutter sound???

Sweet as think I’ll grab one!

How much it costs includes fitting ?

Should have got this kit coz my antz one sucks

You guys ship to nz?

Are you guys located in Melbourne?

The tape is a bit unnecessary buddy

what s the aim of doing this?