Ford Maverick Truck Cubby Mount with FITS & USB power Install & Unboxing by AKRO Designs

Просмотров 76 тыс.

% 1 263

Available here: akrodesigns.com
or here: akrohd.etsy.com
We are giving away one of each of the 4 cubby products we designed for Ford maverick. To enter head over to our Instagram page @akroltd and leave a comment on any of the cubby mount posts.
Designed for the odd cubby on the ford maverick truck, this mod gives you a fits slot and extra USB power. The install takes about 20 minutes, where you will drill a small hole in the bottom right hand corner of the cubby (covered by rubber mat if not in use) and feed the included wiring down to the fuse panel for a routine fuse tap.

Опубликовано:

31 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@shauncain5379 2 года назад

When I saw the cubby, something like this was the first thing that occurred to me. Definitely will get one once my Maverick is delivered.

@collinis1 Год назад

Has yours been delivered yet?

@shauncain5379 Год назад

@@collinis1 Not yet. But it is listed as in production so hopefully by early April.

@franciscovaldez8639 2 года назад

I don’t have a Maverick but I really enjoyed your instructional video and really helpful information. Hope you sell thousands of those!! Thank you for your work!!

@buzzmcmahan8827 11 месяцев назад

Man that looks like one of the best things I've seen on the maverick

@benyo4652 Год назад

Excellent work, like the additional instruction at the end. Im in the process of getting my Maverick and will sure be a customer for that item. Keep up the good work!!!

@akro9777 Год назад

Thanks Ben, been busy but i'm working on a new vid for the V3 model i currently sell over on Etsy

@dcdfire 4 месяца назад

Really nice presentation. I'm sold! Thank you!

@copperhead228 2 года назад

Cool video and cool little accessory

@filip04254 2 года назад

Nowadays, when each of us uses a phone in a car, every new car should have a factory-mounted mobile phone holder. Nicely designed and convenient to use ...

@akro9777 2 года назад

To me it’s safer to have the phone in a dedicated spot where I can always see it and not fumble around looking for it. But for major companies I’m sure it’s a “gonna get sued if we do that” type of thing.

@akro9777 2 года назад

@@TonyCrispruby kinda like a dual monitor setup

@Countcho 2 года назад

Thank the karen’s of the world for not having that

@kennmikos9120 Год назад

I don't know about the other trim levels, but the Lariat has one. It's just (I assume for liability reasons) way down at floor level under the center console next to the wireless charging pad. In other words - useless for, say, navigation purposes.

@LOG1CDS1GN Год назад

@@kennmikos9120 why would you use your phone screen for navigation purposes, when every one of these trucks comes with Apple CarPlay and Android Auto as standard?

@cruzer01 2 года назад

This is great, thank you!

@Outlander_man 2 года назад

Awesome stuff!!

@rayknight5825 Год назад

Well though out product. Looks like a good spot for phone. Better use of that cubby for sure. 😊 👍

@bneg82 2 года назад

The moment I get my November 21 order I'll buy this.

@jamespoteat9361 2 года назад

Great work!

@familykavanaugh8217 Год назад

Can’t wait until I can order this. I took over someone else’s 2023 maverick and am loving it!

@akro9777 Год назад

fun little truck, right?!

@pezave 2 года назад

NICE!! I put my garage opener inside there... good for hiding things lol

@swampydrain8683 2 года назад

Best use for the useless cubby that I've seen so far!

@TYLERMORRIStech Год назад

The cubby was designed by ford to have things exactly like this to be 3d printed for it

@jpj028 2 года назад

Brilliant! Thanks for sharing. You sell the full kit? Can you share the additional parts I.e phone holder?

@michaelnelson2951 Год назад

Great video, thanks.

@MyCousinGrandpa 2 года назад

Nicely done

@rosarioespinoza7050 2 года назад

Probably the best implementation of the cubby mount I've seen - do you have the files available for purchase anywhere? Don't see them on the site

@haygood9 3 месяца назад

Nice mod

@DogGuy19 Год назад

Nice job Ford, for including this with every new Maverick. Oh, wait, NEVER MIND. You have to do it your damn self........

@dugintexas7908 25 дней назад

yep, saved money for everyone who doesn't want it and made a spot that is easy to create printed stuff for the truck.

@Jake-jy5oh Год назад

Just recieved and installed my Lariat colored mount. 😅 Took me way to long to figure out how to remove the panel in front of the fuse box.

@chrisis1033 2 года назад

thanks for this excellent video… ordered one a week ago and can’t wait to hook it up!! gear idea for the cubby.

@akro9777 2 года назад

Thanks for the order! I think I saw your name on the orders I shipped out yesterday. Message me on Etsy if you want me to double check.

@chrisis1033 2 года назад

@@akro9777 yep that sounds right… i got a notification of the shipping!

@kdc300z 2 года назад

Nice!

@darianlopez7490 2 года назад

Daaang nice

@tintdr Год назад

You should make the connectors shrink wrap connectors

@ralphash1163 Год назад

Do you have a complete kit on your Etsy page or could you supply a link?

@noidretlaw 2 года назад

Very cool. Tks

@tintdr Год назад

If toy can make this and have it so it can slide out to use as a piggy bank as well that be awesome you do provide enough length in the cord

@mikeharo2568 7 дней назад

I just came across this also and wanted to get it but like others, doesn't seem to be available or listed anywhere.

@tylerbeets4016 10 месяцев назад

Can include links for the phone mount and the wiring kit?

@brez85 Год назад

Any suggestions for a MagSafe mount?

@crzybluesmurf69 Год назад

Is there anyway your able to make a cubby box so I can mount usb in it and put it in the lil cubby on my 2002 dodge Dakota sport dash? Don’t need phone mount just something square to fit in my cubby with a usb in it. If you get what I’m saying lol

@GameOverSqueeze Год назад

Are you still making these. I would love to buy one.

@pjwilken5372 2 года назад

Excellent how-to. Please forgive my lack of understanding - does this USB port enable phones for wired Apple Play and Android Auto (eliminating the need to drop a cable down to USB-C port below) so I merely need a very short USB-C cable? A buyer comment from your Etsy ad: "This is far the best way to utilize the cubby hole. I can now use my cellphone holder, gopro, and etc. I also like that you can put a small usb adapter to have you phone connected for android or apple carplay."

@akro9777 2 года назад

Yea that's honestly why i addressed it, i cannot change his comment but did email him about it. This will not work with apple car play unless you buy the bluetooth connector and use the molex USB to charge or wireless charge. The main thing with apple car play is that i do not know if they would work together in sync. There is alot going on within the logic of auto connect and i don't think i can willie nillie add another module and they both coexist together. It is something i have in the back of my mind and will further investigate if there is enough interest.

@kaze1sd 3 месяца назад

Will you be making this mount again?

@metomwhou 3 месяца назад

Have you changed the design since this video?

@jamers99 Год назад

Where can I get the USB wiring kit?

@rockobeam2706 2 года назад

I like it. Still waiting for my xlt.

@gregb9264 2 года назад

When did you order it?

@rockobeam2706 2 года назад

@@gregb9264 December 2nd

@gregb9264 2 года назад

@@rockobeam2706 I feel you My dad and I put a deposit down on the Ford lightning pro for a total of two of them haven’t got an email to actually order them yet tho

@rockobeam2706 2 года назад

@@gregb9264 yup. The sweet ones we gotta be patient for

@SanosukeTanaka 2 месяца назад

I've been looking for this kit and am genuinely upset that I can't find it. Any chance you can share the STL so I can make the FITS version that you no longer sell?

@stephaniebrown9387 Год назад

Would love to get one please put your info, to order thx

@Sembazuru 4 месяца назад

I don't see this model (FITS with charging) on your website or Etsy store anymore. Is this model obsolete now?

@am80ma 2 месяца назад

do you have a link to the usb module?

@danielpilachowski2424 2 месяца назад

Me too, no response...I wonder if the company closed up

@TX911dude 20 дней назад

Are you still making these? They aren’t on your website or Etsy store

@himeh02 2 года назад

Can it hold an iPad mini?

@johnheger2953 Год назад

This is genius! Thanks for the rad video! Do you make a magnet phone mount for this?

@johnheger2953 Год назад

Also, I know this video is like a year old so are your newer models car play compatible? Thanks.

@akro9777 Год назад

@@johnheger2953I'm definitely due for a new video. New products are much more refined than this one. But no not for apple car play - really tried to get that too work but its SO much work to do it, and the car-play USB modules are like $160 now. Thanks for the nice words - i don't make a magnetic mount because there are already so many good options on amazon - check out Lisen and Ainope.

@johnheger2953 Год назад

@@akro9777 Thanks! I got a lot of this info on your etsy page right after I sent this. Do you happen to have a link to the carplay module that'll work with your cubby unit?Thanks

@orangecrocks Год назад

nice job!

@antoniorivera5762 4 месяца назад

Saludos Me interesa comprarlo dónde lo puedo comprar. Gracias

@oldmanonroad.7843 Год назад

Good job thank you

@12769Scott Год назад

I went to your store but looks like your taking a break when do you think you will be taking orders again

@akro9777 Год назад

Cubby mount v3 and cubby bank v3 will be available this Wednesday.

@jeffrogers2180 5 месяцев назад

I'm not seeing this stuff on your website.

@antoniorivera5762 4 месяца назад

Me interesa donde lo puedo comprar 😊

@harleyac7695 Год назад

I am on your Etsy page now. Does the socket (pop socket) mount angle towards the driver at all?

@akro9777 Год назад

no it points straight out. you might be able to find a pop socket mount on amnazon wiht a ball connectore. I have 17mm 20mm balls joints for the FITS anchor

@harleyac7695 Год назад

@@akro9777 do you make a 3d printed “shim” to fit the AMPS mount? There is a rock solid pop socket mount that has very good adhesive that lasted in my previous car for 5+ years I want to use. I just need a flat surface angled towards the driver to mount it on 🤔

@soybeaner85 3 месяца назад

so... the link doesnt have the right mount available... and the usb port link is nowhere to be found...

@MasterJP28 Год назад

Do they make one with a MagSafe stand?

@akro9777 Год назад

Use the 17mm ball joint and there is a 6$ magsafe vent clip that you can use with it.

@elgalloloqo101 5 месяцев назад

Just got a Maverick, are you still producing this Cubby Mount ?

@ebenezerwheezer2957 3 месяца назад

Seems like a fly by night outfit. I've sent them communications never heard back anything.

@tintdr Год назад

Hey so I went on etsy to order and the site is super confusing. If I order the USB fits mount does it come with the phone slide in piece? Not the phone holder but the piece that slides in?

@akro9777 Год назад

there are two selections - make first selection and a picture showing options for selection 2 should appear. How should i make it simpler? You are referring to the 17mm Ball Joint, and that is selection C i believe.

@tintdr Год назад

@@akro9777 No the picture did not change on Android. Also its confusing when I wanted to order. So I did not order yet. And then it says something does not come with it???? I order things all the time. I'm letting you know its very confusing. Get ride of the drop down boxes. Put a picture up of what people are getting and let them select that and buy it in different configuration,s what I wanted to buy is what you installed in the video. But I can't find it and the selections are ridiculously confusing and I. Sure I'm not the only one who thinks so

@akro9777 Год назад

@@tintdr Thanks. Maybe i will just do separate listings for everything.

@tintdr Год назад

@@akro9777 I think your a very smart person, And I love the ideas and options you created, I order things all the time off ebay and Amazon for my trucks as I buy, fix and sell allot of trucks. So ordering parts and options is crucial to get the correct parts. Not bashing you at all. Love what your doing. Just trying to give you good advice here. Its just to confusing man. If you fix it please comment here that its fixed and ill place my order. Thanks pal!!!

@akro9777 Год назад

@@tintdr no i really appreciate it - i dont have an android so i would never know your experience. thanks for the kind words. I think ill give it some time tommorrow - It's tricky with etsy because i am under impression that people won't view my shop so i try to include everything on a single listing. I think ill give individual listings a try and compare numbers.

@Mathew187187 Год назад

How are you grounding to plastic ? Just a honest question.

@akro9777 Год назад

its a stud

@Mathew187187 Год назад

But terminal is against plastic I’d say you are barely getting a connection. Find some where other grounds are and use that as reference

@s.b.1713 Год назад

too bad the etsy seller is taking a long break, prolly trying to get caught up on orders. Hope they come back online soon.

@socorro713 Год назад

You grounded a wire to plastic?

@akro9777 Год назад

its a metal stud that goes into the metal frame of the truck.

@theshop5331 10 месяцев назад

thanks, Jesse, nice vid. Say "yo bitch" to Walt for me.

@marvine3360 Год назад

paid my money for this and the site is down

@ebenezerwheezer2957 3 месяца назад

I sent this company emails and messages and never got anything back.

@lawnmowerdude 2 года назад

I’m just confused why you need to have your phone right next to a screen connected to your phone.

@akro9777 2 года назад

I like it. It’s like have dual monitors and I always know where my phone is.

@lawnmowerdude 2 года назад

Car play or android auto makes that completely unnecessary.

@Sembazuru 10 месяцев назад

Not really. I have Android Auto (through the Motorola wireless dongle) and while it is nice to have PocketCast on the same screen as Waze, I think I'd like to have Waze full screen on the Mav's screen and my phone next to the screen with PocketCast there. YMMV

@ziobruno9324 2 года назад

No one should have to do this to a brand new vehicle that should have a full size screen instead of Ford"s 3/4 size screen and that ill conceived cubby. It's quite odd.

@akro9777 2 года назад

I’m with ya. I offer other products that go into the cubby without any drilling required. Looking around back there it does look like they are going to have a new bezel and new screen for the 2023. I’m almost positive it’s same screen as bronco sport and they made it work.

@Sembazuru 10 месяцев назад

@@akro9777 I have a 2023 Mav (XLT Lux) and can confirm for anyone else reading these comments that the screen and cubby on the '23 is the same as the '22. From the sales documentation for the '24 it looks the same.

@Fit4C Год назад

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

@dalescott3077 2 года назад

Do you have the STL files available for purchase? I can print my own

@akro9777 2 года назад

I can give them to just you. Send me an email at akrogolf@gmail.com I don’t want them public because people will then sell them on Etsy printed out of petg and I’m then competing against my own design and not sure if there’s anything I can do about it because there is zero enforcement to Creative Commons.

@dalescott3077 2 года назад

@@akro9777 Thank You Sir, email on the way and they will not be made public I respect the work and time you have put into them and your copyright. I am still waiting on my truck to be delivered.