Ford Mondeo MK4 tachometer / speedometer change / MiniDOT to Convers+ / Forscan mileage adjustment 

Hello, no key adjustment is needed. Just exchange of dashboard and mileage adjustment. Nothing else is needed.

Děkuji! Mé služby jsou Vám kdykoliv k dispozici! 😆

Hi, thank you. The gasoline version has more RPM than diesel one. So in my opinion you should use dashboard from the same type of fuel as you have. Mileage you can adjust upwards by yourself using OBD diagnostic and Forscan extended licence. Downwards you have to find somebody with special diagnostic. About the year - you just need to keep pre-facelift version. Facelift version could be used but it has to be adjusted by somebody who knows how to do it - otherwise the airbag sign icon will appear.

Hi, thank you. I am using vLinker FD+.

If you have Mondeo MK4 facelift diesel, you have to use Mondeo MK4 facelift diesel dashboard - tacho. Does not matter if maxidot or convers. You just have to keep the car model, generation and fuel.

Hi, thank you. With the forcan you can set entertainment level of the car which includes also changes in climacontroler. But I never tested it personally so I cannot tell you for sure.

Hello, unfortunately I have no experiences with Focus. Only Mondeo and S-max.

Zdravím, já používám kabelovou verzi ELM 327 s manuálním přepínačem a pak BT verzi vLinker FD s automatickým přepínáním. Nicméně pokud se nemýlím, tak přes Forscan lze upravit kilometry pouze směrem nahoru. Na snížení bude pravděpodobně potřeba jiný SW. Který bohužel nevím.

You can adjust kilometers upwards using Forscan extended licence.

Díky! Nájezd jde změnit směrem nahoru s rozšířenou licenci forscan (na 2 měsíce zdarma a dá se obnovovat po vypršení) - to byl můj případ, budíky měly min než moje auto. Češtinu jsem nechal nahrát od kluka z Ford fóra. Nahrál mi češtinu na parkovišti před lidlem za 10 min ☺️

@@Placekmich Díky moc. Jinak videa pěkně a srozumitelně natočená nevzdávej se já teď čistil u svého 2.2 129 kW EGR na prášky. Toč dál držím palce.

Hi, I would recommend to read error codes on diagnostic. Normally when you change dashboard no beeping is present.

I would recommend to connect car to the diag to see what is happening.

Unfortunately I have no clue why you interior light doesn't work. I never faced to the similar problem.

Hi, honestly I don't know... But I think it should work, because all open doors are visible on the dashboard...

​@@Placekmich Very hard to find a left hand drive dash. I'm looking for a right-hand mounting panel. Thanks for the help! I'm glad there are people like you. Greetings!

In my opinion, it would be necessary to use alarm clocks with miles.

Hi, unfortunately it is not possible via Forscan. With this software you can increase KM only. Maybe with using UCDS software it will be possible, but this I did not test.

@@Placekmich thanks, I'll check it 😜

Hi, yes. Forscan can be download from page forscan.org and there is also possibility to get 2 moths extended licence for free.

Hi, actually I don't have any issue with buzzer after swap. Try to figure out which configuration is not correct. In my case I only changed the mileage on the dashboard nothing more. A did this swap o my both cars - mondeo and s-max.

Ahoj, o novým jsem neuvažoval a ani nehledal, podle mě to bude strašně drahé a možná i nesehnatelne. Na druhou stranu používaných se dá sehnat relativně dost a je spousta lidí, co je dokáží modifikovat na lepší funkce.

ja sem si teď koupil ten converse+ a jdu to vyměnit a už teď mám hrůzu z toho nastavení…hlavně km at pasujou atd atd

Ahoj, pokud se jedná o Mondeo MK 4, tak ano. Je musíš hledat benzinovou verzi (má víc otáček na otáčkoměru).

Dakujem velmi pekne za odpoved.Nooo dufam ze najdem.

Hi, yes. This dashboard is pre-facelift version.

Yes it will work. Only problem could be with old radio unit that will not show on the dashboard what is playing. Same as on my video.

@@Placekmich I have an Chinese Android radio. I saw in some video comment that it doesn't work on 2006 S-Max, it will not light up the dash lights.

My s-max is from end of 2006 and it works. If you have Android radio and correct canbus it should work normally...

@@Placekmich There's a more beautiful dashboard from FORDS-MAX (WA6)1.6 TDCi [2011-2014]. Do you know if it is also compatible with October 2006 1.8TDCI Ford S-Max? Or have to be like the one you show in your video?

@@PModesto It could be used but there has to be modified firmware in the dashboard unit. Without this update it is not compatible.

Ahoj, jde to přes forscan extended licenci která je free na dva měsíce (ale pak se dá znovu obnovit). Návod najdes na stránkách forscan.org

Mám kúpenú licenciu ale nechce mi načítať riadiacu jednotku budíkov, namontované ani origo rádio. Skúsim namontovať origo rádio aj s origo budíkmi , uvidím čo mi to ukáže.

Zistil som čím to asi bude, nemám origo obd pre Forscan, tým pádom mi neprenáša všetky údaje. Idem zohnať origo OBD potom dám vedieť.

Ahoj, podle stránek forscan.org jdou kilometry pouze navýšit a to z rozšířenou licencí, která je zdarma na 2 měsíce (pak se dá znovu prodloužit). Pokud potřebuješ jít s KM dolů, budeš potřebovat pravděpodobně jiný SW. Bohužel já takový neznám. Ale na Ford fóru, nabízejí dohrání různých funkcí do budíků Convers+ tak by mohli umět i snížit km.

Akú verziu forscan si mal nainštalovanú keď si to resetoval

Hi, I am not sure, but I think that it cannot be done at grand c max. It could be done on mondeo, s-max and Galaxy for sure.

Hi, probably via diagnostic, but honestly I never did this change.

Hi did you solved ?

Hi, I am using Forscan software (it's free) and modified Elm 327 scanner with ftdi chip a.aliexpress.com/_Ew6yCE9

Coding is needed just for mileage correction. The rest is just plug and play.

@@Placekmichplease help me somebody with the mileage correction i bought the cluster instrument and i’m actually angry…now i have to find the right person with right skills and right program for it