Ford Sierra Pinto Turbo 

Четкая тачка получилась, завидую, класс !!!

Hey man, nice video, watched it like 20 times already :) Did you use type9 or mt75 transmission? Also, if you ran Mt75, what flywheel/clutch? (220-240?) THanks!

now thats what i like .... i have a pinto 2.0 . 205 block in my vw t25 and looking to tune / upgrade it to this standards do you have any pointers on where to start first ? mybe fit efi first? all help / pointers will be appreciated . thank you .

He's a slow thinker, but he's my friend.

Well, point is that this is a budget car, "most bang for the buck" type. And pulled out 213hp from stock 100hp is good for this kid of money, even though my weld looks like shit hahaha :) Look at my other movie, of this sierra, running in the dynos.. you can clearly see how bad i welded haha! I run standalone ECU's on my other car projects, that are more serious done :)

AWESOME!

could you send me how did you got the extra injectors and the pressure switch intalled?

6:00 "fan vad kass bil"

is it running again today ? No problem ?

Visst fan är det ängelholm?

eran sierra går så jävla bra och jag är ett fan av sierrer så jag gillar denna

*My summer car be like*

@joululli HB?

Vad gick kalaset på ? :)

vad blev kostnaden på den? :D

@wowhunterhabbo Visst fan stämmer det!

nice from stock pinto..

Tack men nej tack! :)

Everything ok but the suspension :))

Is it still running?

haha så går den ut här i processkärlet

Then its the T9...

Oikee auto väärillä jätkillä

No :)

cheaper option and you can snap the cam belt and damage nothing! Long live the SIERRA

Lol!

No, compression ratio is pretty low by default in Pintos. Together with E85, it's a Win Win :)

jep..165 nakit ja rattia vispaten ni saa sen linkkuu..voi jeesus

Bra video forden gick trevligt ^^. En offtopic fråga vilken klocka har kamera mannen? ser fin ut :)

Stock Type-9, 5-speed. Works like charm !

@joululli Haha.. dunno. 101hp original.. around 180-200hp.

Ai ai

Ja jää

Wow nice car ! Driver seems very talented too - "a natural"... Keep up the good work!!

och turbo sierra jättää sen

Hello dear is this a car for you? I'm looking for this car's engine

Saab 9-3 / 9-5 turbo. TD04-15T

That manifold is exceptional. Is there anymore?? I need it to finish my project:)

how did you make it run E85 please ? mine has carburetors, so i think i'll need tu upgrade it , but some says that 2.0 DOHC cant run E85

Say around $350 USD. It ran on 352cc injectors in fuelrail, and Volvo 740 K-jet fuelpump on E85. + 2pcs 370cc extra fuel injectors. Very good ratio cost/fun :-)

@1222nap Stock ECU and ignition yes. But I build my own enricher, that's triggered with two pressure switches.

What turbo do you use? I am about to buy an mk1 sierra with th same engine as yours and I want to make the same thing as you, put in a turbo and stripe down the entire interior. Thank you very much.

Hade jag kört bensin hade hela motorn varit sönderspikad för längesen.

No modifications on the clutch/rest of the transmission? If so, how long does the clutch last?

I'm going to do the same with my cologne V6 2.4i . I don't find pressure switch...

Beautiful! Job well done.

What is the turbo ??

De två lamporna till höger, vad står dom för? Markera att extrasprutet jobbar?

The differential is welded. Dynoed it to 213hp/355nm @ 0.78bar boost.

IS IT reliable

are you running stock ecu and ignition? maybe there is project progress written somewhere? nice car, just need better suspension :)

good job u video ur sierra NOT UR SELF lol. but nice pinto spec ;)

Original pressure plate, upgraded lamel. Sinterlamel.

have same sierra just without turbo in it and a bit difference is that your's is sedan and mine is estate :)

2:41 HHAHAHA

OI! (as the instrument panel has fallen out of the cockpit) nice :)

HB = Horse Bower but i mean Power = HP.. :D u know.. :D

Ser ut att gå riktigt najs! hade ni satt dit 2 extra orginal spridare till? hade tänkt bygga lika på min 240-88 med b230f vad tror ni?

what kind of pressure switch do you use?

@nobbecool Det kan du hoppa upp o sätta dig på att det är! :D

de är den som ligger på blocket nu va? :D fan att man inte har några pengar :(

afr is too low. i think this engine is dead now. afr must be aroun 7-9 for best power. to lean afr broke angine and the pistons melt

WITH GASOLINE 95 AND 98 HOW MUCH POWER ?

@Stianlokkeberg Japp, basic och det fungerar bra :)

Where did you got the pressure switches? I always wanted to build a car like this.

Great piece of budget building there! ....i bet you can have some serious fun in that! Fantastisk! ;)

Awesome car, do you have powersteering?

Cant remember, but its the stock gearbox!

e85 is a fuel type it contains 85%ethanol and 15% gasoline

any changes to timing on boost? if so, how:)

indeed, >14,7 is lean,

Ofcourse you can weld good even its a budget car...

Nice to hear. Everybody should have a friend like him.

Please pm me that budget items, what u use

what fuel was it using? can u run standard unleaded?

vill ha strippensäsongen 2012 nu när jag såg den

You are using Type9 gearbox and not MT75, right?

It stock ecu without tuning again?

Also what turbo are you running on this ??

afr's from 8's to 20's nice mapping NOT!

har gaft en likadan men den ladda 1.9.... :)

6:02 whats happend? O_o

It's still alive? :P

did you have to lower the compression

No, too rich!

It's running on stock ECU I think.

@simcaP60fan Stämmer

You're clearly missing the point :P

Veldig bra bygd! :) Men e85 på uåpna motor ? Da ødelegger du jo alt av pakninger

and pinto died xD haha

ser riktigt skoj ut

good video man !!!, a fantastic car !

vill ha begär på denna! :D

hur mycket kostade det ungefär?

asså ni är så jääävla sköna fan va bra :')

Hi! Can you tell me, which type of pressure switch did you use ?

sounds healthly :(

HB?? :D

god bless team bonnmeck

What is meant by E85?