Тёмный

Four Exhausts in One Day! BMW R1250R 

RikkyTang!
Подписаться 4,2 тыс.
Просмотров 15 тыс.
50% 1

That was a long 'un.. I really did take all four exhausts out for a spin in one day so I could be consistent in my sound recording of each one. I'm not claiming that my sounds recording are of the highest quality... just consistent!
I did this for no other reason than to give you folks a little gift from me (whether you wanted it or not 😂) for putting up with all of this exhaust nonsense!
The sound of the Akra is better than I hoped, and I might even come to like the looks one day... 😊

Авто/Мото

Опубликовано:

 

16 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 63   
@shaunthornley1881
@shaunthornley1881 Год назад
Nice one Rikky. Looks good on the bike and sounds great 👍👍
@ianchamberlain1631
@ianchamberlain1631 Год назад
Glad to see you finally fitted the Akra. an excellent video which confirms my decision to order one with my bike when i buy it. Now all you have to do is sell the others and build up your savings again!
@RikkyTang
@RikkyTang Год назад
Yes I will put the others up for sale and I'll mention it on the channel when I do! I hope your lives up to your expectations 😊
@pedrodiaz506
@pedrodiaz506 8 месяцев назад
Great video. Thanks for the info.
@LiquidAudio
@LiquidAudio Год назад
I’m with you on this mate, about to receive my new black R1250R, I ordered it with the standard exhaust because I don’t like the look of the Akra. What made a huge difference on my 2009 R1200R was adding Arrow headers to the factory-fitted Akra can. Felt and sounded like a different bike. UPDATE: I now have my 2023 R1250R triple black, I put an Arrow muffler on it, sounds good and runs well. Video over on my channel.
@bonwana2275
@bonwana2275 Год назад
I put the OEM and Akrapovic exhaust time stamps for comparison. I left out the 2 exhausts without the dB killer. I did this for my own benefit because I ordered the 2023 r1250r with the Akrapovic. In Australia, the Akrapovic is $1700 if you buy it as an aftermarket item!! But if you purchase it pre- fitted by BMW, it is $400 cheaper. Oem Exhaust 1:48 Akrapovic Exhaust 6:12 I appreciate all your videos Ricky. Cheers
@pbofan
@pbofan Год назад
This is very helpful, thank you!
@RikkyTang
@RikkyTang Год назад
Thanks for your comments Bonwana 😊
@matt2wheels
@matt2wheels Год назад
I'd say this sounds great! Lovely bass and raspy top end. Really brings out that boxer sound in my opinion. Which is either a good or bad thing depending on your preference, but I think you like it. What I really enjoy about the factory Akrapovic on my previous gen R is all the pops and burbles on decelerations and downshifts when the throttle map is in Dynamic mode. It's very talkative and stupidly fun. Love blipping down with the quickshifter all the way down to 1st before a hairpin corner and hear the exhaust scream and gurgle. And the nice thing is, in Road mode, the pops and crackles all but disappear, making the ride more gentlemanly for in town if I feel like it. Now I am no hooligan, but mostly I don't feel like turning off the pops, they are just so much fun. What's your experience with the different cans, but especially this one when it comes to deceleration and aggressive downshifts with the quickshifter?
@RikkyTang
@RikkyTang Год назад
Yes you're right the Akra does sound pretty good for a road legal can! Bassier than I expected and I put that down to the larger internal volume of this compared to the smaller cnas with db killers fitted. Sadly the bike never burbles very much even with the louder cans on; but I'll try to listen out for it more when I'm out next 😊
@rattamuspjohnson3196
@rattamuspjohnson3196 Год назад
Pick my 1250r up today wish I'd spect it up with a akrapovic in the configurator, when I asked my BM dealer to get me one in they told me can only get the brushed as the black was only for the American market,?? have ordered the black one elsewhere just for looks I'm lucky enough to be buying this as a second bike and I consider this as just a proper little retro bike with all the bells as I'm an older git wonder if your next bike should perhaps be a s1000r or a touno as you do love to push on with the R😅 been following you since you have had yours been been good watching👍
@aps-pictures9335
@aps-pictures9335 Год назад
7:15 - I noticed the same added vibration and less smooth with the Arrow one on… only had it a day so going to use your test scores as a comparison (and I’m fully loaded for now which doesn’t help lol).
@ianwhitehead4728
@ianwhitehead4728 5 месяцев назад
Very good watch 👏
@RikkyTang
@RikkyTang 5 месяцев назад
Very kind of you to say so, thanks!
@bruceread4507
@bruceread4507 Год назад
WOW !! You've done a lot of work on this exhaust problem. All these vid's u've made. I like that black one at the end. So is that the end or R U going to keep looking? U must have saved some guy's hour's of work.
@RikkyTang
@RikkyTang Год назад
I hope that is the end of my journey now Bruce! The only logical step after this would be a titanium header from Akrapovic but I don't think I could justify spending that much money... whatch me try though 😂
@bonwana2275
@bonwana2275 Год назад
The Akrapovic adds a boost of 5.4 horsepower and 4.7 NM of torque both at 3650 rpm which I think is fantastic.
@MotoMango
@MotoMango Год назад
Dang! After tune though yeah? Or can you just bolt it on and call it good? lol
@RikkyTang
@RikkyTang Год назад
Just bolt it on and call it good 👍🏽
@MotoMango
@MotoMango Год назад
@@RikkyTang Niceeee
@esauruiz6125
@esauruiz6125 Год назад
No, really? I've heard you must reprogram to get that boost. It's not only the exhaust.
@RikkyTang
@RikkyTang Год назад
@@esauruiz6125 For the end can only, no need to remap. If you fit the Akra headers too then a remap is recommended. The original comment from Bonwana is actually a little incorrect - the Nm torque figure is good but the HP gain is 2.4 according to the Akra website (just for the end can)
@RRRRefuelRideRace
@RRRRefuelRideRace Год назад
All sound good, but my final dilemma would be to pick between Akra and Leo. Enjoyable video. Keep it up Rikky.
@RikkyTang
@RikkyTang Год назад
Thank you RRR 😊
@RRRRefuelRideRace
@RRRRefuelRideRace Год назад
@@RikkyTang You are welcome.
@johnsparks211
@johnsparks211 Год назад
Thanks for the video. Doesnt seem to be much in it so ill keep my RS standard. Dunno how you managed to fit the shad mount like that on the exhaust bracket. Maybe the R is a little different to the RS or Shad have improved the mount. Cheers
@RikkyTang
@RikkyTang Год назад
No it's pretty much cosmetic unless you get into ECU flashing and dect pipes etc., which I'm not (currently!) interested in. I'm not sure what you mean about the bracket... I think I followed the instructions properly and it seemed that it was the bracket that was at fault. The RS and the R are identical at the rear as far as I know!
@pbofan
@pbofan Год назад
How easy is that Akrapovic to fit and secure? Would really like to *finally* get that same one (since the brushed titanium is apparently no more) on my R1250R this summer. I’ve never bothered with aftermarket slip-ons on any of my other bikes, though, so not clear on what the difficulty level is for those of us who don’t do much wrenching.
@RikkyTang
@RikkyTang Год назад
This is nice and easy pbofan 😊 It's a low difficulty level as long as the exhaust comes with the proper fittings (and there aren't many pieces to this). Just make sure you wipe down the exhaust and link pipe with WD40 or Isopropyl alcohol before you start the bike, otherwise you risk burning fingerprint marks into the metal finish.
@phantombigballs8165
@phantombigballs8165 8 месяцев назад
It's a 5 min job
@tailtidy8185
@tailtidy8185 Год назад
Another great video . Appreciate your time to remove and install 4 exhausts and record in one day. The bike may have felt a bit lumpy but possibly, the ECU adjusted , hence why it may seemed smoother at the end of the ride? Akra. looks and sounds fantastic, Maybe consider a possible remap? If you do, consider contacting either JCT 33 Developments and/or Crowe Performance who maybe able to advise. Enjoy your Akra. burble.👍🏍
@biketorquewales
@biketorquewales Год назад
I’ve put the Unit Garage end can on my R1250R , had it the black widow Decat pipes and had it tuned , pulls like a train 👍, looks great though in Black Ricky
@aps-pictures9335
@aps-pictures9335 Год назад
Would love a vid
@biketorquewales
@biketorquewales Год назад
@@aps-pictures9335 I’ll see if I can get a video of it next weekend and load it up
@garybarnes3975
@garybarnes3975 11 месяцев назад
Hi Rikky, Thanks for all your vids on the r1250r. Did you notice any differences in power between the exhausts, i am thinking of buying either a Dominator titanium or a Remus. But not sure if there will be any disadvantages in putting a non oem exhaust on. Thanks again & all the best. Gary
@AzureCloudCowboy
@AzureCloudCowboy 3 месяца назад
Hey Gary . What did you buy ?
@garybarnes3975
@garybarnes3975 3 месяца назад
@AzureCloudCowboy nothing yet, still thinking about it.
@AzureCloudCowboy
@AzureCloudCowboy 3 месяца назад
I bought the Dominator . Its arriving this week.
@phantombigballs8165
@phantombigballs8165 8 месяцев назад
Which one did you stick with mine came with yhe Akrapovic but I hate how massive it is
@RikkyTang
@RikkyTang 8 месяцев назад
I stuck with the akrapovic in the end.. the bike performs the best that way, although I agree it looks too big!
@alangolightly9850
@alangolightly9850 Год назад
Just bought 23 R1250RS and ordered Arrow slip on. II would imagine decatted headers would help a lot but need remapping ECU.
@RikkyTang
@RikkyTang 11 месяцев назад
It is tempting but also an expensive route to take!
@crumblymal8479
@crumblymal8479 Год назад
Interesting I liked the SB but then heard that LeoVince Rikky and thought it actually sounds better which was a surprise to me . Akrapovic hmm not quite for me if it was mine I would be going with that LeoVince for looks and sound if it didn't effect the performance and I would have no noise guilt with that one either 😁👌👍
@RikkyTang
@RikkyTang Год назад
Yes I have to say the Leo Vince is my favourite out of the lot and if I could find a way to make it work with the bike (that didn't take too much extra effort or money!) I would have not bought the Akra!
@crumblymal8479
@crumblymal8479 Год назад
@@RikkyTang Ohh dear Rikky you must be chucking some big pennies at this problem lately 😉👍
@Vjekoslav-vf3hr
@Vjekoslav-vf3hr 2 месяца назад
What leather jacket is this?
@lordgibbness
@lordgibbness Год назад
I liked the leo vince sound on this vid...
@RikkyTang
@RikkyTang Год назад
Yeah sounds great doesn't it!
@lordgibbness
@lordgibbness Год назад
@@RikkyTang Yeah. I'd put up with the extra volume and keep that one, as it didn't rob power without a baffle plate, right? Nice size too and could map it to get perfect fueling too...
@lordgibbness
@lordgibbness Год назад
You can keep your kwak as the quieter touring bike... Make this one into a boxer engined s1000r :)
@lestersmyth692
@lestersmyth692 Год назад
For me the Akro and the standard silencer sound the best personal opinion of course…..the other two more so without the db killers fitted don’t suit the bike.
@RikkyTang
@RikkyTang Год назад
Thanks Les, if I was 20 years younger it would be the unsilenced Leo Vince all day! But today the Akra suits me down to the ground... just not looks wise ☺
@ragerider6283
@ragerider6283 Год назад
Akra's not the pretiest I guess but it's also not awful looking either by any means. Plus t's a quality product with a nice little power & torque bump too so you can't go wrong really.
@bonwana2275
@bonwana2275 Год назад
I ordered the Triple Black so I think the black exhaust will look great
@user-bs5nk9ud9k
@user-bs5nk9ud9k Год назад
Jeckyl and Hyde?
@RikkyTang
@RikkyTang Год назад
They don't make one for my bike as far as I can see, according to their website.
@UncleWally3
@UncleWally3 3 месяца назад
Too bad there’s not a way to compare the sound while on or beside a bike and what the same thing sounds like coming out of a half inch iPad speaker.
@rattamuspjohnson3196
@rattamuspjohnson3196 Год назад
Pick my 1250r up today wish I'd spect it up with a akrapovic in the configurator, when I asked my BM dealer to get me one in they told me can only get the brushed as the black was only for the American market,?? have ordered the black one elsewhere just for looks I'm lucky enough to be buying this as a second bike and I consider this as just a proper little retro bike with all the bells as I'm an older git wonder if your next bike should perhaps be a s1000r or a touno as you do love to push on with the R😅 been following you since you have had yours been been good watching👍
@RikkyTang
@RikkyTang Год назад
I think the brushed was available in the UK for a while (could be wrong) but nowadays only the brushed one is available... think I prefer the black one too. I think the because it's a naked bike and not the first choice for long distance, it makes great sense as a second bike to have some local fun with! I've had an S1000R already - a 2019 Sport but I realised that it didn't have enough low-midrange torque for me! The Tuono is always tempting but I seriously think I would lose my licence if I owned one so that holds me back!! Can't afford to lose my licence and at the same time I haven't got the will power to ride a fast bike slowly 😂
Далее
Exhausting! My silencer experiences with the BMW R1250R
13:11
2023 BMW R 1250 RS - 30 Years Old - 1993 BMW R1100RS
18:38
BMW R1250R Top Five DISLIKES!
6:55
Просмотров 20 тыс.
BMW R 1250 GS OEM Slip on Muffler Baffle Removal
9:14
2023 BMW R1250R SE - FIRST RIDE REVIEW
55:48
Просмотров 15 тыс.
Better than an RT, RS or GS, the BMW R1250R
7:23
Просмотров 25 тыс.
Lool 🤣💃🏻 BMW i4 ❤️
0:14
Просмотров 4,6 млн
Помыла и машину, и водителя
0:18