Fox Podium X disassembly and rebuild. 2015 RzR 900 XC polaris (see description for info) 

Agreed. This was a really interesting seal. It has a lip on both ends. After it leaked when installed the correct way...I tried reversing it since there was a lip on that side also but single sided. Since that rebuild I figured why the shock kept leaking. There was a very tiny score mark on the inside of the seal head/ bearing. The seal could not keep oil from passing that tiny 1/1000 mark. I ended up using 400 and 800 sandpaper over an hour and removed the mark...voila...no more leak !

I didnt actually measure the oil capacity but if I had to guess I would say probably 500 to 600ml for my fox podium x 2.0

Actually they are podium x. Can go online to polaris parts for my machine and they are listed. Mine is the XC900

@@ontariooutdoorsman I have seen that on the Polaris website but ran into major issue while looking for parts kits, however: Fox Racing Official Website (utv shock finder tool, you can google that to find a link) 2015 Polaris 900 XC Podium Performance series 2.0 qs3 … front and rear. Rears have a slightly different part number because they’re dual spring. Fronts are single. On some sites they slip the x in (and the two series of shocks are nearly identical on the outside) but the people that built them do not consider them “x” series. Your shock even says performance series on the reservoir. They’re exactly the same as mine. Exact same machine, same Year, same colour, same trim, same everything. Also, if you look up images of podium x series, the reservoir is usually ribbed and not flat. That being said. The seal kits for the 2.0 x and qs3 series maybe the same between the two series.

I have seen that on the Polaris website but ran into major issue while looking for parts kits, however: Fox Racing Official Website (utv shock finder tool, you can google that to find a link) 2015 Polaris 900 XC Podium Performance series 2.0 qs3 … front and rear. Rears have a slightly different part number because they’re dual spring. Fronts are single. On some sites they slip the x in, but I assure you the people that built them do not consider them “x” series. Your shock even says performance series on the reservoir. They’re exactly the same as mine. Exact same machine, same Year, same colour, same trim, same everything. That being said. The seal kits for the 2.0 x and qs3 series maybe the same between the two series.

@@ontariooutdoorsman is your machine 2 or 4 seat?

Ok good to know. The one thing I wish was that they would sell the seals like are in the shocks when new. When new they have an o ring and a seal. The aftermarket is a bigger seal only no o ring. You have to buy a new bearing head to get the original seal combo. Thanks for the info. It will help when looking up parts.