FOXWELL NT630 PRO OBD2/ABS/AIR BAG Code reader. Is It worth it? 

Thanks!

Nice! I used mine weekly it seems!

Well ...Ok

Nice!~

@@FixingWithPassion unit says my 2005 scion ABS bleed is "not available"!! DAMN! sending it back!

That's great!~

I wish I would have seen your comment I just sent that junk back too I needed to do the same thing

not sure if anyone cares but if you guys are stoned like me during the covid times you can stream pretty much all of the latest movies and series on Instaflixxer. I've been binge watching with my girlfriend during the lockdown =)

@Coen Kaden definitely, been using InstaFlixxer for months myself :D

This one does airbags.

Not sure I need to check this option.

yes,it will works well if you have come with 16Pin OBD2 port

So far it has.

Yep.

Yea let them know.

I've got the same Issue....Trying to update it.

On a Silverado/gmc? Or a different vehicle

Nathan Rohrbough, I since returned that foxwell but I think I may have found the problem. Try a different year truck. With my maxi check I had to use the 2006 option to get it to work on my 01. Let me know what you find. Thank you

Let me check

Very informative, THANK YOU!

Also whats your thoughts on Foxwell NT726? Looking for a Scanner for my Mercedes ML350 2010, I was suggested the TOPDON ARTiDiag800BT as an all around scanner? Any thoughts would be appreciative. Thanks

E-bay

No but they do sell scanners than do that kind of stuff.

o$

Yea scotty will give my his

Its not a bad tool. I still use it today to see my Engine temp.

@@FixingWithPassion do this work for ford fusion

accident yet

Yes it been in a accident an had to replace driver wheel airbag will it clear module

I think so.

I'm not sure. I mostly do air bags/ ABS stuff.

No

According to the advertisement, it dose SAS reset as well.(Steering Wheel Angle Sensor Service Reset) too.

I think so....Got side tracked today...I know I can activate my ABS pump....etc with it. Test results for continuously and noncontinuously monitored systems I do believe is supported.

Its nice for the Money! I just fixed my Xterra air bag and ABS....;D

I have the Foxwell NT650 Elite its ok but but only does few functions ABS Airbag SAS ect plus normal OBD2 stuff that cheap scanners do . It can't get into modules bit limited in my opinion so looking at getting Nt 530 this has vehicle specific software you get one manufacture then £50 to add other manufacture's but does ton's more

no no no no no sin aire

Mine does!

I have not found that. I can activate the abs pump but not auto bleed...still experimenting with this thing.

@@FixingWithPassion Thanks for getting back to me. Here's the video I was referring to: smile.amazon.com/dp/B07PLX2B48?ref=dp_vse_rvc0

@@markwest7258 i think the reason for the price compared to another at thousands is that they can only do so many things. And also a certain amount of cars. The more expensive are more expansive

It does

Ok video in a hr

Yea so many variables in the auto technology now days. It makes Einstein's head spin.

@@FixingWithPassion Nathan, You are right! You have live, breath, eat and study all the changes. NB7 used to mean California system, now even that has changed. (Don't tell anyone) I was teaching 2 day classes on 30 subjects in 13 tech colleges in 7 states, then the next week, hold evening 4 hrs tech seminars in 8 states for ACDelco on contract with Raytheon. We was North of Auburn Hills (Chrysler) but not North of Grand Blanc and went thru a Raytheon facility. Our mgr took us into a room where this red head curly head kid was doing animation's for an automatic transaxle. Looked great on screen. A few asked questions and then I asked, have you ever worked on one! He looked straight at me & said; " I have know idea what this is or how it works, but I know it is an automatic transmission!" I thought seriously? I never said a word. Now, here I am, wore down, hurting, joint surgeries and this guy is 30 something and never been dirty or owns a screwdriver plus makes more than I ever did. B.S. I got 4 SnapOn tool boxes and 28 plastic & metal boxes of special stuff, MIG, big sandblast cabinet & 2 leather sewing machines! But not enough lumbar left to use anything! I feel stupid! DK, ASE master tech since 78, retired. Have great holidays and a wonderful 2023! Ok?

No

@@FixingWithPassion its mentioned in the website of Foxwell

Yea this does. I pulled up a PO740 on my neon.

@@FixingWithPassion ok cause i want to get this for my dad he has a 99 navigator

www.ebay.com/itm/ABS-Airbag-SRS-Reset-Tool-OBD2-Code-Scanner-Diagnostic-Scan-Foxwell-NT630-Pro/152286624410?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

If you fix the issue. Yes.

@@FixingWithPassion I actually need to pass emissions first my code b1448, its a passenger occupant classification sensor, that i have no idea how to fix so iam getting the foxwell nt630 elite

I think so...I know I can activate my abs pump....but Have not gotten that far yet.

if you get the NT414 has that feature

Ok

@@FixingWithPassion ok i can reset my tire sensor2 now. I just order one

It seems to work with my 2000 4Runner. Sometimes I noticed it takes a while and I have to start over with the connection then boots up.

LetsSmash007, it only support Asian Car from (2003 to 2016 model), American (USA) Car (1996-2016 model), and European Car (2001-2016 model), so yeah your 2001 Nissan is out of luck.

Word!

is scanner tool not a dildo

I might get a 2nd one.

Yo compre este producto y me siento completamente engañado, muchas opiniones que vi son de gente que lo compra y le da 5 estrellas sin probarlo...... Si quieren tirar su dinero a la basura, compren productos Foxwell, para mi es publicidad engañosa.

@@yokesetio3602 Amigo cuál es el problema que te causa? Yo quiero comprar uno, pero estoy viendo opiniones antes.

@@kevinandonay397 No me detectaba el sistema airbag en mi vehiculo que es un aveo ( coreano ) ademas que la interfaz es muy pobre y los graficos e informacion que te proporciona la maquina tambien, esta maquina vale 100 € y compre despues una de 40 € que tiene muchisimas opciones, modelos y muestra los graficos y la informacion como dios manda, solicite ayuda para solucionar mi problema y no hubo forma despues de estar bastante trantando de solucionarlo actualizando todo lo posible....., al final tuve que devolver el producto que no funcionaba y no me devolvieron ni los gastos de envio, es curioso que un obd 2 ELM 327 me detectase el fallo y este aparato no, simplemente lo veo un obd2 con una pantalla que quizas si le metan alguna funcion de mas que un obd2 pero para mi fue tirar el dinero con todas las letras. No entiendo la gente que valora un producto sin probarlo, hay muchisimas opiniones asi.... No lo he probado pero se ve bonito en su caja ! le doy 5 stars ....... WTF !!!

@@yokesetio3602 Ya veo amigo! Si es cierto yo tengo en uso propio un OBDll ELM327 y si me ha funcionado de maravilla con la detección de fallos del Check. Ahora bien sólo me queda una pregunta más. Ése scanner Foxwell sólo sirve para Bolsas de Aire y frenos ABS? O también se puede ver los Códigos de La Luz Check Engine y ver que sensores están fallando? Códigos como P0123 P1349 etc...

Yep!

Samuel Shardey buddy I got one for my 335i great tool ! Say good by steeler ships.

I know....the paint is missing...gatta do someting to make it pretty.

Scotty is looking for you.

lol

M.A.G A 2020 Son

Please tell us more!

Mine works great still! For the basics.

@@FixingWithPassion right for the basics but it advertised that it can calibrate the SAS and other things that it doesn't so I feel it's over priced and misleading advertisement.

Also it's not biodirectional

@@Greenfarmer25 Mine calibrates the SAS . I did it on my 2002 Xterra. Maybe it needs an update.