Great instructions! However, I got confused when powering on my babyape pro v2, it went to bind mode immediately without the need to connect/disconnect 3 times. I kept doing it over and over again wondering why the lights and the beeps were the same no matter if connected once, or 3 times. To be clear, after only one connect, it would do the double beep and the tx led was double blinking like it should when in bind mode. Finally I just decided to try and bind it and it worked. I'm pretty new to all of this and it was a little frustrating that it acted differently than everyone said it would. I'm posting this in case someone else runs into the same anomoly. Happy flying! and thanks again for the tutorial, it was very informative.
Hi Bart, thanks for sharing this, this is something I might have overlooked, as when I was making this video I have already bind it many times, and to force the receiver into binding mode, plug and unplug 3 times is the way to go.LOL Good to know it has worked right out of the box. Happy flying!
@@iFLYXWings6589 Mine came with 3.0 on it already so I didn't have to flash. But my controller was 2.5 so it wasn't binding. At first I thought the babyape wasn't going into bind mode. And that's what brought me to your fine channel. I soon figured out that the problem was in my controller and that I had to upgrade it, and then like magic, it bound. I learned a lot today, thank you 👍
Mind binded it says connected on my Boxer there is a C On radio but when I arm it, nothing happens the quad does nothing yet it says it’s connected and binded
Trying to do this with the baby ape pro v2. I dont have wifi on my computer. what do I select instead when flashing the drone? BetaflightPassthrough or UART? Technically I'm plugged into the FC through the bottom of the drone so I'm leaning toward passthrough but I want to double check. Thanks for the video! This whole process has been one big headache, I'd be 100% lost without these tutorials.
Frankly speaking, I never tried doing this via betalight passthrough, so i don’t think I will be much help here. Flashing via Wifi is still the easiest option, but the next option might be to flash via betaflight passthrough. But If you drone is received recently, it might already have ELRS 3.0 already. Anyway, glad that at least I helped a little
You will need to set it up yourself. Go to ELRS LUA Script - Enable wifi - Connect the WIFI using a PC - Setup your binding phrase in the webpage that pops out - Save & Reboot. (Sorry, i understand this is complicated
Hey man. I am a newbie. "Baby Ape Pro V2 (ELRS)" does this version come with a radio controller and a goggle or do I have to buy these things separately? Thank you
i have a problem that the connection of the vtx stops at like 5 m. ive tried multiple goggles so it has to be the vtx. Do uhave an idea how to fix that?
Can someone please let me know what else I need to buy other than the Baby Ape pro to get started? None of the sites make it easy to understand. If there was a starter kit I'd be interested. Also do I need a windows PC? Only have a Chromebook and android phone
The PC I have is a Window PC, not sure if the Chrome book will work, try it first Below will be the recommended items(You can use it for a while) required beside the baby Ape ELRS 1. Radio: TX12 ELRS :$100 2. Goggles: Fat Shark Scout: $200 3. Lipo Charger: Hota D6 Pro : $120(Do not save money on charger for safety concern) 4. 2S or 3S Lipos: $10-$15 each Below are the cheapest but not recommended option 1. Radio: BetaFPV Lite Radio 3 ELRS $60 2. Goggles: BetaFPV VR03 $70 3. Lipo Charger: Hota D6 Pro $120(Do not save money on charger for safety concern) 4. 2S or 3S Lipos: $10-$15 each
@@iFLYXWings6589thank you for that! I found there is a chrome web app and I think an Android configurator. Is there any way that you may know of sell all those parts maybe with the drone in a package deal? Would make it way easier.. thanks again!
Hi, I ordered the darwin BABY Ape II kit( goggles, drone, batts,...included), I was wondering If i need to do the same things with mine too, Thanks Nice video!!
Well not sure if they will prebind the drone for you, if not, you might still need to go through the steps , but this is generally learn once know forever
@IFLY X-WING FPV i have followed the video and it worked great but recently my baby ape pro v2 is not arming. the Controller i am using is the raidomaster TX12 and it says it is connected i was wondering if you have an answer
If it was arming prior but now it is not, double check you setting to see if anything changed, check your TX12 and turn on turn off model match to see if that is the problem. Or simpler plug it into betaflight to see the arming flag
If you are taking about ELRS. The baseline should have an SPI receiver, you need to flash Betaflight to 4.4 version for ELRS 3.X. You should be able to use the auto detect function at BF to find the target
Theoretically, the FC can be powered by a 1S lipo, however, the weight of the entire drone and the motors are not meant for 1S, for this size 2S if most likely the minimum
Yes, this is the one you might need Upgrade your Darwin Baby Ape Part 2: Antenna, 4K Cam & TPUs #drone #fpv #darwinfpv #runcamthumb ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MRXFz_fDKxw.html
You can as it is budget enough to start with; however, if you are complete beginner as you say, my suggestion is to start with a tiny whoop. Mobula 7 / Mobula 6 will be a good starting choice
good morning I have a problem with my Meteor 65 pro it practically doesn't go into wifi mode!!!! how can I solve it? What may have happened? A thousand thanks
Please confirm your Meteor 65 Pro is the 2022 edition with the serial based ELRS receiver? If you have the older models most likely the receiver is an SPI
@@iFLYXWings6589I confirm that my model is the 2022 version and that after inserting the battery and waiting 60 seconds the drone does not enter WiFi mode, I don't understand why and how to fix it, can you help me thank you very much
@@Andrearossi130 Frankly the board should enter Wifi mode directly; however, for this particular board, the wifi may be harder to detect in some occasion. try turning on off your wifi and try again. If still nothing, you might need to flash it via Betaflgiht passthrough ...
dude i got a terrible idea that i want to try i want to build my own controller/command using a real flighstick and i really want to know if that's possible or not,i'll go learn to programming if i needed to, also do you think i can add a speedometer a compass and a altimeter that shows up just like the HUD of a fighter jet in the goggles ? I really want to go next lvl
Based on the description, I think you have a bricked ELRS receiver, a special flashing method will be required to unbrick it . I have the same issues and looking in the solutions as well. Once I figure out I will post it. For the the best way I can recommend is get a new receiver for now
@@iFLYXWings6589 thank you🙏 It's so strange, i saw the hotspot & connected, then i went to the website as you did, i wanted to add my homewifi but it couldn't connect and since then i can't do anything/ i have the baby ape pro v2 and the elrs receiver is preinstalled. Maybe you know what happend?
Oh, i misunderstood Your receiver should be fine. This has happened to me before. switch off you wifi on you PC and reenable it. Plug the quad again, wait until it goes to wifi mode and connect again. Make sure you give it enough airflow during this process(Blow it with a fan) or something might overheat
I’m a teen and I’m trying to get into gob I have about a year of experience on the orca sim and I use my ps4 game pad as an controller but my parents don’t let me purchase anything from the internet cause the are scared that some hacker will steal all the money so I have tried telling them that I am going to give the money to put them in their bank accounts but the refuse please tell what to do
Sorry, I really cannot give you much advise… for now you will have to work it out with your parents and make sure they are comfortable until you grow independent.
