FREE ENERGY PROJECT LG smartdrive stator re wiring instructions for 12v/24v Wind Turbine Generators

Просмотров 41 тыс.

% 492

I am making a wind turbine that will generate power by utilising the potential of two rewired LG smartdrive stators, in Factory mode the generator produces high voltages but low amps, by rewiring the stator we can get it to produce less volts and more amps.
In this video I re-wire a 36 pole LG SMARTDRIVE washing machine motor so that it will work as a power generator in a home build wind turbine.
The wiring configuration is called 4x3C , this basically means we are splitting the stator into 4 separate ones that reduce the voltage and increase the amperage , as there is no exact manual for this stuff I have gone with a 12/24 volt rewind as shown on the www.backshed.com website.
This is the first part where we do all the main work I explain everything in detail the second part will be the joining together of the phases.
PART 2 IS FINISHED AND WILL BE UPLOADEDTONIGHT KEEP AN EYE OUT FOR IT.
Other parts of the project listed below..
FULL PLANS IN THIS VIDEO
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-foiVe-92l0w.html
MAKING STATOR ALIGNMENT BRACKETS ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yMey39sevSM.html
MAKING SECONDARY STATOR BRACKET ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RL24Vq8M4B4.html

Опубликовано:

10 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@ronaldd2154 3 года назад

Awesome man thanks so much for this. The vid I've seen of a guy who used this for a water turbine said it averaged around 300-500 watts, with around 800-900w on its max! Would be interesting to see the test results of this one. Great job👍

@GavinFreedomLover 3 года назад

Cheers mate it's gonna be a goodun

@tahirzaroon5586 Год назад

You are so genius

@GavinFreedomLover Год назад

Thanks

@RicoGG 2 месяца назад

Man I love this stuff. What the idea behind burning the end of the cable? Maybe there are more videos explaining that but just thought I would ask

@GavinFreedomLover Месяц назад

Not sure what you mean , sometimes you burn the cable to solder it a bit further down than the end.

@closertothetruth9209 3 года назад

one good thing with your dual design is you can double the voltage by joining two rectifiers like you would with two batteries if desired.

@GavinFreedomLover 3 года назад

I didn't realize that how would that work just connect in series??

@closertothetruth9209 3 года назад

@@GavinFreedomLover yes on the dc side

@arkangel8709 2 года назад

This is the Best video I've seen, on this Subject.!! WHERE DO I GET ONE OF THOSE CENTER MOUNTS.?? I Definitely need One of them for testing.!!!! And How much are they.?

@GavinFreedomLover 2 года назад

I made the mount myself

@closertothetruth9209 3 года назад

now i get it, the fisher and paykels are wired opposite, in a clockwise direction, i like the hacksaw trick. hey maybe its like the simpsons in the episode showing the water in the toilet and sink plug holes spins in a different direction in the southern hemisphere LOL. i just wired in the same direction as the factory did but now im wondering which direction do those washing machines rotate in your part of the world.

@GavinFreedomLover 3 года назад

I think some of them spin both ways now , a sign of the times perhaps 😃

@closertothetruth9209 3 года назад

@@GavinFreedomLover yes i think youre absolutely right

@NTF-zb9wi 3 года назад

@@GavinFreedomLover Any ideas regarding how to differentiate between the two? Perhaps by something on the stator block? Also, for your duel stator/rotor set-up (with them facing opposite directions, wouldn't you need to turn one stator over (or have an identical one; but, wired to have the rotor spin in the opposite direction), to compensate for the differences in how they've been wired? I've currently only seen pictures of the stators (I have 1 waiting for me to pull it out of a scrap machine, once the weather quits breaking record lows; and, a couple more coming from ebay sellers, which will probably be here by this time next week); but, I'm guessing that you're saying the coils are wound opposite on some models of washers. [AKA: What would be "coil 1" would be "coil 36" on the other.] Is that accurate; or, are we getting off into "left handed monkey wrench" territory? I hadn't considered a "duel motor" before; and, this is the 1st I've heard about some of these motors being wired differently than others... Interesting concept, though; and, I'm looking forward to see how it turns out. :)

@tommcdavid9917 3 года назад

After it is rewound and you have the 3 phases, how do you determine which of the three is 1, 2 or 3 ? Stupid question I know, but I'm new to all this.

@sopiyan7958 2 года назад

I also have a used washing machine and I turn it at low rpm it only comes out 70volt AC and I'm confused to use it

@relaxing-6894 3 года назад

Anyone here knows where the best place to buy copper wire in the US? I don’t have confidence to buy from Alibaba.

@jamest.5001 3 года назад

Wouldnt it be nice, if the coils fit on the ring with dovetails or something, so it could be removed and wound if needed,

@GavinFreedomLover 3 года назад

Yes that would be just tidying it all up now taken a few hours to both but worth it and won't take as long next time.

@payton1284 3 года назад

I just mirrored the image to fit my simple brain aswell

@throttlejunky101 Год назад

I wanna build one, anyone know if this will work, found it for sale with heat not working... LG Sensor Dry Gas Dryer, not sure if it's smartdrive??

@GavinFreedomLover Год назад

Yes, even if you do get a motor you may find it is the aluminium wire version which is a lot harder to work with

@throttlejunky101 Год назад

got my motor today, thnk it's copper, gonna utilize all the bearings to make it simple. found a direct drive lg washer for 30 bucks@@GavinFreedomLover