Freewing Tail Flame LED Simulated Afterburner Overview | Motion RC 

For customers using the Tail Flame on 8s set ups. This afterburner in stock form requires the use of a 6s balance lead. For an 8s setup, you would need to use one 6s and one 2s battery so you have the 6s balance lead. If you are running two 4s battery’s to make 8s it will not work without modifying the connection.

Much more reasonable price than other afterburners!

Sweet! Such a clean installation and setup. These are must have additions for every EDF I have. So fired up🤘🔥about these units!

I read a comment in your afterburner customer review section that mentioned something about being able to adjust when this light would start coming on by using an extra channel in their receiver. It makes sense to me, although I'm not sure how to make that work. Can you guys make a video giving us a tutorial on how to achieve that. I think that that would definitely skyrock the already high popularity of this great product... I really hope that you guys can do that for us...I really love this product! 😀 Thanks again for bringing it to us at that great price 👍🏾 👌 Have a great day...Greetings from Douglas, Arizona 👍🏾🌵🦠😷🇵🇷

I just ordered these last week and installed in my Mirage 2000 and F-22 so far. Super easy install. They look great. And i got 4 sets for the price of one of the competitors.

Well it's about time freewing. Nice little kit. Although I prefer mine hardwired in so I don't have to keep messing with balance plugs. Would also suggest you do a twin. Even on a single fan twin led units at an angle help throw the light out better. And finally use foil tape inside the ducts. Does 2 things. 1) Obviously helps project more light out. 2) More importantly it prevents light bleed through the foam which can look terrible. 👌

Nice budget offering to add to the market!

Great job.

Mine is on the way to try too

So glad Wes is new spokesperson !!

Nice and easy setup. 👍🏻

Awesome MRC !!!!

Can we see it in the daylight? They don’t seem very bright

sooo COOL

Nice work

Very nice.

Sweeet... Like what I'm seeing from Motion. 😉

After watching this video the one thing i really like and would like to see it used on more planes is the removable battery tray

I need these in my life 🤪

I thought that price was a typo. Bravo MotionRC 🎉

God damn it. I wish I saw this 7 hrs ago. I just ordered the F22

I have two Freewing 80mm planes that I would like to add this on, but I run a telemetry sensor off of my 6S balance tap, is there an adapter that could accommodate both?

The LEDs should be mounted on a truncated cone so that the light reflects and bounces to the rear, and minimizes light leaks to the front. The dark gaps would also simulate the injection vanes.

good job guys, i was wondering why you didnt offer afterburners for your products since i first saw one...looks nice

The gripen motor doesn’t have the2 screw holes for the freewing afterburner kit , it will need the other kit with the adapters

They didn’t show the part where if you mount the afterburner on this specific plane (The 90mm F-22) you have to cut out a section of foam because the motor doesn’t fit with the afterburner light on. Smh they should of just showed it but I guess this is a video for the afterburner not specifically for the F-22.

Wes, mine comes on as soon as I move the throttle from the off position. Your video says it should come on at 1/2 throttle. Is there a way to adjust this, or do I have a faulty afterburner?

Mine the controller burned up first flight on my Avanti S V2 LED still works. Cheap!

Hi quick question I just got a freewing f-35 ll v3 70mm will that fit it because I only see it say 80 and 90 can you please help

I don't own a jet but , that an awesome feature

Can 2 be used together? I bought 2 for the freewing mig 29 and they aren't working together

I just bought this. I have the 8s f22. I using two 2 - 4s lipos. Can I cut the 6s jst and put a 4s jst ? Or is this 6s only ?

I did not getting did not showed the connection to the receiver 😢 did he use a y cable to the trotter receiver? Not sure

Did you run the power cable along side and tucked in next to the esc? How that work for you...avoiding the front of the intake .

When will these be re-stocked? Thanks.

I do wish that was some that could fit on outrunners

Can it work in MiG29? If I have 2 where can I plug the other lead into the rx? Y lead ? Thanks

Hello, Great Afterburner is there one for The Viper 70 mm i want one.

Although i would like a blue color with red flame would be cool

So that adapter will oly work with an inrunner motor!

Are these compatible with all jets? Do I need one per EDF?

can i use it on F14 using 2 of them with y cable???

As a side issue, I see that the EDF installed in the F22/90 is the newer V2 8S 4075-1350KV Silver metal? This is the new stock EDF? I only ask since I'm in the market for the F22/90 but seems that the current HP/deluxe version is advertised as having the older 8S 4075-1390KV...🤔

Will Motion be offering a 70mm option? And a twin option? This world look sweet on my Freewing twin 70mm SU-35.

hey there, great videi0 but can you tell me why the website says won't work with Avain smart escs"

Tried one similar (I think same?) on my 8S F-22 and connected it to one battery balance lead and the wiring to the burner melted. There must have been like a ground loop or something? What is different with this Freewing one that stops this happening?

Hi, I really do like the look of them from the spec sheet it says 12.5V to a MAX of 24V from the video it looks like using 3 cells and also on the website picture E631 is using 3 cells BUT E632 it's a bit hard to tell whether it's using 3,4,5 or 6 cells from the picture. Now to my question people who have a G2 Spektrum 6S batteries (No balance lead) Would a full charged battery 25.2V (I know under load the voltage would drop a little bit and soon would come down to near 24V and below) likely to burn out the afterburner or not?. At the moment they are out of stock on the E.U site BUT I would be very interested in getting some when they are in stock. Steve

Always thought EDF's should have a LED on the outside of the circle and a center burner.... that would be amazing

This Motion's setup is way easier than the RC castle's version, in which you would have to throttle-calibrate. With Motion's setup there's no need to do that. You literally plug-and-play.

Will there ever be one for smaller 64/70mm EDF's?

Any idea why my light stays on at zero throttle?

I don’t like the idea of powering it from half the cells in the pack. Seems like it would cause the cells to discharge in an uneven manner. What is the current draw on one of these? I think if I get one I will be using a DC-DC buck converter

Awwww man!! What about us 64mm EDF guys?

Do you supply adapter for out runner I have 70mm red arrows hawk t. 1

THis is great.........can you tell me about the F-105 behind you? The Thud is one of of my favorite planes

70mm?

Would this fit on the freewing f14

Would be good if you had them in stock for the European/ UK☹️

If you have a spare channel can you mix it to throttle so it doesn't light up until 75% throttle?

What a neat way to add an afterburner to other jets I've added in runners to!. Without breaking the bank too!.

Is there not one for the 70mm? Or will these work

Balance connector a 4s for a 8s setup?

Looks awesome, but I have 2 questions: 1. have a voltage sensor plugged into the balance lead of my battery, is there a way to use the sensor and the afterburner together? 2. What are the diameters of all the non-freewing adapters?

GREAT !!!! But "Not in stock" in Europe Motion RC shop :(

So if you have a 8S setup and run two 4S batteries. Will this system work?

If can

Did not explain if he use a Y cable for the throuter connection

Will this work on the 64mm f22 aswell.

I mounted it on a freewing f-16 70mm 6s 4000mah battery, the led stays on all the time is this normal?

Blue lights as well as the orange would have been great... not interested...rethink rebuild..

Guys don’t forget to install your LED wires along the motor wires…..

It's a pitty it does not have the startup flickering like the RC Geek's got. It simulates the afterburner startup better.

You guys just put Goniac out of business with this awesome product with an even better and affordable price tag! 👌 😱 You'll sell thousands of those kits! 😁👍🏾

Where's the link for the product? Is not in the video description...🤦🏾‍♂️ I want one for my F22 Raptor 6S...I just maiden her last weekend... Please share the link for the afterburner light... and maybe a discount with proof of recent purchase of any of your models...😁🤞🏾😁 ---------------------------------------------------------- Update 03/21/2023 Today I ordered my 3rd set... Thank you MotionRC for this excellent product 👏 👌 🙌 👍🏾🌵🦠😷🇵🇷

Want put in a10

Totally bs I just got ordered the gripen and recorded afterburner and surprises it not a direct match up need the " non freewing version "

Right before you said for in runners only my 🦐 🧠 was thinking won't the wires get tangled.