Freightliner Box Truck Inside Upgrades

Подписаться 23

Просмотров 13 тыс.

50% 1

This here is a 2008 Freightliner box truck that has been redone on the inside. It has things like alcantara headliner and alcantara dash, 2 original speakers that were upgraded to pioneer speakers, upgraded boss 460brgb stereo which is pretty cheap but works pretty well and has everything you will need, 4 custom added speakers from a Honda Odyssey two in the middle of the dash and two in the headliner, two 12” boss subwoofers with a boss amplifier, floor carpet, two upgraded seats the driver one is from a Mazda while the passenger one is from a Honda Odyssey, added fog lights, and the noise cancellation has been improved by adding foam on the inside of the doors and between the headliner and the roof. All of these things have improved the truck and made it much more enjoyable and comfortable to drive.

Опубликовано:

30 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@Steve-oh9tu 2 года назад

Nice for a old truck. Good music as well.

@watertaaooo 11 месяцев назад

Dope 🔥🔥🔥

@alekseysavolyuk4272 4 года назад

Nice, good job!!!

@MarioMartinez-is1cg 3 года назад

Looks nice 👍 clean setup

@yuradanylchenko4869 3 года назад

Thank You

@kg7yts187 3 года назад

Imagine the ground shaking from bass on the road... And this drives by instead of a civic

@PerformanceFestiva 3 года назад

Thanks for sharing this! I recently purchased an 08 M2 like this and I want to make it comfortable for long trips. Did you try to use the Honda drivers seat too? Do you think it would fit? I really like how yours fits. Looks better than the Freightliner seat.

@yuradanylchenko4869 3 года назад

Thanks I appreciate it, I didn’t try using a Honda driver seat so I can’t confirm if it is going to work easily or not

@AdventureswithJoah 2 года назад

Can you please let me know where did you buy your wire harness for the radio because I’m trying to install mine in my freightliner M2

@marvinmojica7290 Год назад

Hey how you end up installing those other seats I been trying to take the freight ones out and install some other confortable seats

@martinechico7 3 года назад

Can you explain how you installed aftermarket radio ? Any wiring harness or how you do it

@yuradanylchenko4869 3 года назад

No there was no extra wiring harness needed the plug on the radio is the same as on the car but you have do de pin some wires meaning pull them out of the plug otherwise the stereo is not going to turn on

@JustBaros 3 года назад

For the driver seat is it still air ride after installing a Mazda seat? Also which make n model was it from, coz this freight-liner seat are not good at all.

@yuradanylchenko4869 3 года назад

Yes the driver seat is still air ride, I don’t exactly remember which make and model it was from, I’ll have to find out and let you know, yeah the original freight liner seat is terrible I don’t understand how they put such a bad seat in a truck that gets driven so much.

@JustBaros 3 года назад

@@yuradanylchenko4869 yeah mine gives me problems. With the seat u replaced both top and bottom cushions right? Do u have any pictures of how it looks?

@yuradanylchenko4869 3 года назад

So the seat is from a Mazda 3 but you you can probably use any seats which ever fits you best and whatever is the most comfortable for you.

@JustBaros 3 года назад

@@yuradanylchenko4869 thanks

@AdventureswithJoah 2 года назад

Can you please let me know if you have the part number for the wire harness because I am trying to change my radio and don’t know where to get the wire harness from to put in my radio in my box truck that is a freightliner M2

@yuradanylchenko4869 2 года назад

It’s the original Freightliner wiring harness. I just re-pinned. So just switched the wires around to get it working with the radio

@LuisDiaz-bw5qc 3 года назад

Do you have more videos or pictures what you do on the doors or the hood please

@yuradanylchenko4869 3 года назад

Yes I do, but basically where it was just a bare metal door i insulated it with this thick foam that a glued on there with this spray on glue, and it’s really quite in the car now and you can hear by the closing of the door on how it sounds.

@keenancaldwell56 3 года назад

@@yuradanylchenko4869 where did you buy the foam and whats the name of the foam.

@yuradanylchenko4869 3 года назад

I did not purchase it, I just had it laying around. So I’m not sure where they sell it, I think any foam will be better than nothing as long as it is dense.

@myaristo95 2 года назад

How do you remove the dash to replace the speakers?

@yuradanylchenko4869 2 года назад

You have to remove the front panel where all the controls and air vents are. Then from there you you remove the top dash piece.

@Castellanostowingservice 3 года назад

What size are the original dash speakers

@yuradanylchenko4869 3 года назад

Honestly I am not sure, I don’t exactly remember.

@vv9550 3 года назад

How to do that?

@yuradanylchenko4869 3 года назад

I would say just start by doing one thing at a time, start taking the interior apart and wrapping it in alcantara then wire the subwoofer so on and so forth.

@yuradanylchenko4869 3 года назад

@R6Dad Gaming No you don’t but it won’t work if you just plug it straight in, although the connector is the same the wires are not in the same place so you have to re pin them basically switch the places of the wires. I think the wiring harness on the truck only has like 5 wires coming out of it so it’s not too bad. It happened to us when we tried to just plug it straight in lol.