No video :(

Freightliner No Start With No Trans Message..!! Faulty Fuse..!! Check This Out..!!

Подписаться 632

Просмотров 137 тыс.

50% 1

Any modern mechanic has dealt with blown fuses! Usually they're easy to spot,,,but,,this one wasn't..!!
Below are affiliate links for tools I use in this video and others. I am not endorsing, nor am I paid salary to promote them! I will only provide links for tools which I currently use and have found to provide excellent value and reliability in the field!
Disclosure, these are amazon affiliate links & I do get paid a small commission if you purchase using them
Some Specialty Tools I use:
Power Probe: amzn.to/3pFeI2B
Network Toner: amzn.to/3ECHcy5
Ford 6.7 Injector Bore Brush: amzn.to/32ANOA8
Adjustable Prybar: amzn.to/3FTdp5y
Electrical Connector Round Micro Files: amzn.to/3pDcGQy
Bernzomatic Torch: amzn.to/3sPJCal
Diagnostic Interfaces I use: You must provide a laptop for these..
VXDIAG VCX Nano for GM: amzn.to/3sUQ67O
VXDIAG VCX Nano for Ford/Mazda: amzn.to/3eL8sQD
VXDIAG VCX Nano for Toyota/Lexus: amzn.to/3eOZHow
NEXIQ Interface for Commercial Trucks: amzn.to/3zAHKE1
Special Note: Check out Harbor Freights Pittsburg Pro Swivel Head Ratchets with the green handles..!! They are the BEST ratchets I have ever used!

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@jerrywashington1008 2 года назад

Hey, just had the same issue with a driver on the road. Your video helped me solve the issue and get him going. Your video is a tremendous blessing. Thank you for posting.

@molaroismorais8068 3 года назад

Thanks again brother... You did a great job finding where the problem was. Some mechanics would charge millions of dollars for for something so simple, and wouldn't even get the problem solved.... Wow.

@LeeSurber 2 года назад

Glad to help

@arthurk4265 3 месяца назад

You are a genius man! Same problem. Fuse looks good, but was bad. Ill be damned. Beers and cheers for you mate !!!

@balkanskamraka9956 Год назад

I have the same issue for a few days and the truck drive me crazy won’t start at all - no transmission 88 code. I checked online and find you here - thank sir so much you save me and my family between $2000 and $3000 (If I went to the shop they will charge this much to just change the fuse). Thanks again and keep doing good work God bless you❤👍💪

@1slayerfan834 Год назад

Your video just saved my a** today I'm a fleet mechanic had a bucket truck broke down on the side of the road at the beginning of rush hour in DC and yep the fuse looked and tested good but that was the problem thank you so much

@LeeSurber Год назад

Glad to hear the video helped..!! Never stop learning..!!

@ryanwindsor8379 2 года назад

Dude you just saved me a $600 tow bill. You are amazing. Got me rolling

@zapatazapaton1982 3 года назад

You are a genius brother, you are grateful for this teaching, you helped me as you cannot imagine ... God bless you 🙏

@LeeSurber 3 года назад

You are most welcome!

@themaestro7922 2 года назад

Wow. I like that toner device and what a rare fuse problem that is useful for us to keep in mind in diagnostics.

@1waukesha 2 месяца назад

Been bit by that before. Fuses that appear ok but aren’t making contact. I always ohm suspect fuses to be sure. I also usually check for power on both sides of fuses when Im hunting problems.

@chancevinson3923 Год назад

Helped out a lot had a road call 9 at night life saver

@kkibett Год назад

Worked for me Lee! Thank you!

@yapmanbeats 3 года назад

thanks a ton... 8.27.2021 ... made my friday... got singing .... CANT HOLD ME DOWN OHH NO... GOT2 KEEP ON MOVING!!

@LeeSurber 2 года назад

Thanks for watching!

@UnPuzzleLife 2 года назад

This was the fix! Can't thank you enough!!!

@Rapidscity 3 года назад

My truck had the same issue and your video was awesome

@LeeSurber 2 года назад

Glad it helped

@fordforlife6862 Год назад

Dude you are my hero! Exact same thing happened to me. Thank you so much!

@johnconner7264 3 года назад

U just saved a UPS load thank you sir!

@LeeSurber 3 года назад

Thank you sir for watching!

@youngrevival9715 Год назад

Good information

@unitedtruck921 7 месяцев назад

good one

@sandasturner9529 3 года назад

I think my cascadia had this exact problem. A blown fuse for the transmission shifting program (or shifter). 2020 cascadia (happened @ 9000 miles). The fuse was a small gray, blade type of fuse rated @ (10 I think?) amps. $700 fix. If only I knew what the problem was first-hand.

@LeeSurber 3 года назад

It's the little things that get you!

@Penske_Logistics_Roseburg-Ore 2 года назад

I have had this problem in our own freightliner too, it kept blowing the fuse light weekly, so I just replaced it with a 15 amp fuse and no more problems.

@317luckyog 2 года назад

Thank you so much!!!!! You just save me me a ton of money$!!!!!

@arnoldramos39 Год назад

Great video thanks 👍

@Burdenedwarrior Год назад

Thanks for vid

@fathitounsi6079 2 года назад

It help a lot thank you and god bless you

@donaldhausenfluck2200 3 года назад

U really made my day and took some worries away 😁👍

@LeeSurber 3 года назад

I'm glad! Thanks for watching! I'll have several new electrical diagnostic videos very soon!

@youngrevival9715 Год назад

I need to get a toner

@jattshergill2193 2 года назад

Which fuse was it and where ?

@TNG64 Год назад

I have a 2016 Cascadia. I parked it last Monday with no issues. Tuesday morning I walk out to start her. Turn the key, wait for bells and whistles and then turn the key the rest of the way….crickets! I ATG in Seabrook, NH is saying it’s my TCM. I wonder if it could be this simple?

@stephaniegonzalez-pinedo4127 Год назад

Same issue with mine

@TNG64 Год назад

It turned out to be my TCM

@bigballin009 2 года назад

You said you had to jump it to move it to the shop. Was the truck stuck in one gear the entire time? (Mine is and won’t reverse). I will try to pull fuse I pray this fixes it!

@jaimegenovajr3257 4 года назад

This happened to me! Thanks for your video my brother!...✌🏼👍🏼🇺🇸

@LeeSurber 4 года назад

You're welcome! Thanks for watching!

@amalik9517 Год назад

Having same fault but the Tcm fuse does have power..grounds good ohms good.. changed harness..got a new TCM but it still doesn’t have communication. Any suggestions please?

@CantrellMosley1 10 месяцев назад

Did you figure out your problem. I think I’m in your same situation right now.

@Bulletheadbrian2 2 года назад

It didn’t work on mine. Still nothing. Did this last week and changed the starter and put new batteries in then it worked fine for a week now this bs. I hate trucking

@LeeSurber 2 года назад

Sorry it didn't work in your case! Electrical issues can be frustrating!

@ReptiVilla 3 года назад

2005 Freightliner century , truck stalled , got low voltage , engine light and engine protect. Replaced all 4 batteries and alternator. Started but turned off after 5 min of driving . It cranks but won’t start unless I spray starter fluid. Had the fuel lines checked and they are clear. Any suggestions or idea ?

@LeeSurber 3 года назад

Does scan tool kick codes?

@rowellhowell2707 3 года назад

Crank no start 2016 freightliner cascadia

@LeeSurber 3 года назад

What happened?

@jasongutierrez9784 Год назад

whats the description of the fuse on ?

@jamesdking70 Год назад

I have a food truck. I was at an event yesterday. Started the truck up to leave and transmission wouldn't engage. Then no trans code popped up, then another trans code popped up, then a so engine code popped up. Please help... 2006 freightliner mt45 5.9 cummins with Allison transmission

@Rapidscity 3 года назад

Thanks and God bless you

@LeeSurber 2 года назад

Thank you too

@AB__84-s 5 месяцев назад

Where do you get the diagram?

@LeeSurber 5 месяцев назад

The diagram can come from many different sources..!! If you pay extra a lot of scan softwares offer schematics..!!

@Endar13 2 года назад

I had a CPC issue on my 2014 Freightliner Cascadia. After they changed the CPC I now have a "No Trans J1939" that flashes on my dash. Truck starts and drives fine, been driving it for a year like that but I wish I can get that code to permanently go away.

@esmelsanchez7032 Год назад

I have a 2013 freightliner m2 with the same problem, it won't start and it tells me no transmission and I checked all the fuses and they are in good condition.. what would be the problem

@LeeSurber Год назад

First, I would connect a scan tool to check for any additional codes. Next, completely unplug connectors and inspect for corrosion at the TCM and at the transmission. Make sure the dipstick tube is not leaking on the tranny connector. Finally, validate continuity of wires(including connector pins) for all power, ground, and data in the harness. Good luck..!!

@LucianoMartinez-cc2ld 2 года назад

I had a issue with a 2003 Freightliner fl112 The key ignition kept going bad . Could it be my relay back in the firewall problem???

@elcompajoe714 3 года назад

I got this 2002 Peterbilt 320 rolloff truck and it won't crank at all lights on the dash turn on and no lights pop up on the dash, what can be the problem, I checked fuses, starter, battery cables

@LeeSurber 3 года назад

It could be a lot of things but I would probably check for power and function at the ignition switch!

@tulw2728 3 года назад

What toner and tester are the ones you are using, i will be copying you. Thank you.

@LeeSurber 3 года назад

I have included affiliate links to all the equipment I use in the video description of most of my newer videos.

@tulw2728 3 года назад

@@LeeSurber thank you for your prompt reply. I will check it out. Thanks again.

@cristianvargas7626 2 года назад

In these case do the truck have power to the dashboard

@LeeSurber 2 года назад

Yes! There will be power to the instruments!

@rauldominguez7201 Год назад

I almost bought a cluster

@sesarioramirez9413 Год назад

So I’ve had this issue before, but it was the 5 amp five going to the tcm after I had the motor washed. But it just did it again a few days ago! The same fuse! What could be causing that????

@LeeSurber Год назад

Wire or connector degradation!

@hectorespana9933 2 года назад

excellent, my friend where can I communicate with you I have a similar problem, I would like to hear your opinion

@nicholaswhitney4204 3 года назад

I have same condition but all lights are blinking as-well did you hv light issue?

@LeeSurber 3 года назад

No lights blinking with this condition! When you say blinking lights are you talking headlights, parking lights, instrument cluster, all lights, etc?

@mikep6014 2 года назад

I do 4 long cranks when cold then it starts I turn it off and can crank it right up what can it be boss?

@LeeSurber 2 года назад

Depends on engine! Grid heaters or glow plugs could cause this. I would lean toward fuel system not holding prime or developing abnormally low pressure.

@mikep6014 2 года назад

@@LeeSurber dd13 Detroit

@LeeSurber 2 года назад

First, change fuel filters to see if that changes anything! Next, monitor fuel system with scan tool while cranking and running to see how quickly fuel rail pressure is achieved. Make sure low side priming pressure is around 35psi. If rail pressure is achieved quickly that's good. Next, cap injector lines at rail, crank, then watch how quickly the rail pressure bleeds off after you stop cranking. If you see a quick bleed down of pressure that indicates a failing pressure pump. If bleed down is within spec then it is more than likely injector related.

@thowguandong3076 3 года назад

Where do you buy that toner?

@LeeSurber 3 года назад

I have provided affiliate links to all the tools I use in my latest video descriptions.

@yaboyleoo 2 года назад

What code were showing on the dash ?

@LeeSurber 2 года назад

No Trans! I forgot exactly what scan codes were present! It was an intermittent problem!

@omerbayrak1808 2 года назад

Bro i have a code 130 168 trans voltage ⚡. How can I diagnose it?

@LeeSurber 2 года назад

Find the associated power supply wires and check resistance by checking voltage drop. It may be easier to start by cleaning the connector pins with micro round files and then apply dielectric grease and reseat several times.

@thanushthavarasa3059 3 года назад

2012 cascadia starts but the gauges are not working it’s says no trans the truck won’t move do you know why?

@LeeSurber 3 года назад

Sounds like the instrument cluster module! You will probably also see a lot of bulkhead module communication codes!

@thanushthavarasa3059 3 года назад

@@LeeSurber Dose that cause the truck not to drive. My cruise control also doesn’t work and it’s flashes F and then N.

@LeeSurber 3 года назад

A failure in Cluster, Trans, or Bulkhead can cause this. Check all connections to those modules! Clean and dielectric grease all involved system connectors, including at the transmission.

@timcarroll7097 3 года назад

did you say Pete's Diesel?

@LeeSurber 3 года назад

Pete's Truck & Automotive Hwy 77

@abcdifg4 Год назад

This guy makes a lot of damage to the harness. Small holes in time makes corrosion and it cost to replace entire harness $3500 Bad bad bad. What ar you duing smart guy

@lancerains4185 Год назад

A fuse can appear to look good but not be making a connection

@LeeSurber Год назад

Yes indeed..!! I've seen every kind of fusebox failure, from hairline cracks like this, to fuse bases that don't contact the blade, to burnt circuit board traces.

@dereck13988 3 года назад

I have the same truck,once i changed the trasmission fluid it started then would shut off after 30 seconds did this 4 times now it wont even turn over with a NO TRANS CODE any idea? Thanks in advance P.S Was working fine before transmission fluid changed

@LeeSurber 3 года назад

No trans means no connection so it's more than likely in the wiring! It is my experience that is almost always in the connector!

@dereck13988 3 года назад

@@LeeSurber ok thanks it was the fuse after all,gues i replaced it with another damaged fuse God bless you fam