Тёмный

Frisch Marionette Tutorial: Making Puppet Heads with MendALL Wood Filler 

The Frisch Marionettes Puppet Shows
Подписаться 3,2 тыс.
Просмотров 111 тыс.
50% 1

ORDER MENDALL from:
Mend-All a division of •The Alney Group LTD
248 Route 25A, Suite 46, East Setauket, NY 11733
order by phone: (631) 242-9100
Kevin Frisch of the Cincinnati based puppet company, The Frisch Marionettes, demonstrates the process of making a puppet head using MendALL Wood Filler. Many concerns have been expressed about toxicity of acetone. I encourage everyone to do their own research when using any artist materials, solvents, etc. Wearing gloves and a mask and good ventilation are always a great idea but....
1) There is only a small percentage of acetone in the container of wood filler when shipped. The solvent in the can rises to the top and it is not stirred when making the mold pressing. The evaporation rate is extremely high and my wet hands only contact the "wet" filler for a few moments during the entire process. (btw, using the dryer, unmixed filler cuts down on shrinkage)
2) Any acetone absorbed into the skin is insignificant. Acetone is used as a nail polish remover and fingers will SOAK in it for 10min at a time during that process.
3) The human body actually produces acetone and processes it. It is a natural product of our body’s metabolism. According to Healthline.com: Every day, the body breaks down fats into organic molecules called ketones. Ketones contain acetone and travel through the bloodstream until they are broken down in the liver.
4) I am not drinking it and the only time it is used at full strength is in the finishing, yes VENTILATION IS IMPORTANT but primarily because the straight acetone fumes are annoying and extremely FLAMMABLE.
5) According to the EPA acetone is low in toxicity. EPA removed acetone from the list of "toxic chemicals" maintained under Section 313 of the Emergency Planning and Community Right to Know Act (EPCRA). In making that decision, EPA conducted an extensive review of the available toxicity data on acetone and found that acetone "exhibits acute toxicity only at levels that greatly exceed releases and resultant exposures", and further that acetone "exhibits low toxicity in chronic studies".
EPA in 1995 concluded, "There is currently no evidence to suggest a concern for carcinogenicity". (EPCRA Review, described in Section 3.3). NTP scientists have recommended against chronic toxicity/carcinogenicity testing of acetone because "the prechronic studies only demonstrated a very mild toxic response at very high doses in rodents".
This is what my research told me. I do use paper mache as well but that is another tutorial.
FACEBOOK:
/ frischpuppets
Website:
www.frischmarionettes.com/
RU-vid:
/ frischmarionette

Развлечения

Опубликовано:

 

2 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@libbymarcus9400
@libbymarcus9400 5 лет назад
Thanks!! I learned the plastic wood method from Margo Rose in the 1980's. I have continued to use plastic wood but, yes, it is much more challenging than it used to be (but personally I kind of like the terra-cotta like texture). But so glad to know there is an alternative.
@joehumpston7937
@joehumpston7937 Год назад
If I ever decide that I want to make a Pinocchio, I'm totally using this method for the head!
@WayneMartinPuppets
@WayneMartinPuppets 9 лет назад
Excellent tutorial!
@gkseeton
@gkseeton Год назад
I learned to use plastic wood in the early 1980’s. My sculpt was clay then layers of rubber and cheesecloth then the mold material. I was sad when plastic wood changed.
@CreativeSoulTV
@CreativeSoulTV 9 лет назад
Very nice tutorial, thanks for posting it!
@frischmarionette
@frischmarionette 9 лет назад
Thank you!
@Snowyyy448
@Snowyyy448 3 года назад
Nice!
@SWEETROSESINGSDANCES
@SWEETROSESINGSDANCES 9 лет назад
Thumbs up, such an art!
@frischmarionette
@frischmarionette 9 лет назад
Thanks Sweet Rose!
@Snowyyy448
@Snowyyy448 3 года назад
Cool!
@NoxGrim
@NoxGrim 8 лет назад
Thank you!
@Thefreequincy
@Thefreequincy 3 года назад
Bravo!🖤👏🏾👏🏾👏🏾👏🏾👏🏾
@johnmorgan4558
@johnmorgan4558 9 лет назад
There is a product that is similar to cellastic. It is applied in the same manner but microwaved to activate the adhesive. I have not tried it but have seen advertised on a cosplay supply site. I am interested in trying my hand at vent figures. Thank you again for the tutorial.
@dolldazzler
@dolldazzler 4 года назад
Love this video. I definitley try these ideas. Thank you for sharing!😊
@frischmarionette
@frischmarionette 4 года назад
Excellent!!
@Snowyyy448
@Snowyyy448 3 года назад
Yeah I will too!!!!
@daylenhigman8680
@daylenhigman8680 3 года назад
Im going to 3D print a marionette, Hopefully I can make a few for my friendsto share the art
@lauraswan8647
@lauraswan8647 5 лет назад
Great☺
@Super.great198
@Super.great198 7 лет назад
NICE
@Astrobiologica
@Astrobiologica 7 лет назад
What brand equivalent of this would you suggest to use in the UK ?
@zeldaglitchgamer
@zeldaglitchgamer 6 лет назад
Is there any other brands of wood filler that would work for this process? I am looking into this method for making a ventriloquist figure.
@johnmorgan4558
@johnmorgan4558 9 лет назад
Thanks for this tutorial. I remember using shoe polish as a seperator with the old wood putty. We used a wash of the thinned putty and then the regular putty and a material called cellastic to strengthen it. Have you tried any variation of this with the mend all product
@frischmarionette
@frischmarionette 9 лет назад
Interesting! I have never heard of shoe polish as a mold release before. Sadly, celastic changed their product before I ever had a chance to try it. Are you making vent heads or puppet heads?
@kimyoung3484
@kimyoung3484 3 года назад
Wow wow wow wow wow wow wow 👍👍👍👍❤️😁😁😁😁
@frischmarionette
@frischmarionette 3 года назад
Thank you Kim! You made my day!
@design321
@design321 6 лет назад
I really appreciate your sharing your technique, but hope you start wearing gloves and a mask. Acetone is not good for the health.
@staranimationmeknes394
@staranimationmeknes394 5 лет назад
design321 good advice
@Snowyyy448
@Snowyyy448 3 года назад
Yeah good advice
@christopherpdufault853
@christopherpdufault853 3 года назад
This is a marvelous tutorial. I note that it would be desirable for users to read and follow all label directions and Material Safety Data Sheets (MSDSs) pertaining to how to protect oneself from exposure to Mend-all and solvents such as acetone. Note all hazard warnings on containers, including those for flammability. For example, for acetone, see: www.labchem.com/tools/msds/msds/LC10420.pdf For Mend-all wood filler solvent, see: www1.mscdirect.com/MSDS/MSDS00038/80390222-20171125.PDF I haven't been able to find a MSDS for Mend-all itself.
@christmaswitholivia2145
@christmaswitholivia2145 8 лет назад
i was wondering what temperature do you put the oven on after you put the 10 layers of newspaper and how long you left it in?
@staranimationmeknes394
@staranimationmeknes394 5 лет назад
Christmas with Olivia - - the delay should be between 1 and 2 weeks depends on the weather temperature
@emmaeck4276
@emmaeck4276 9 лет назад
Where can Mendall be purchased? The email address on the company website isn't current and no one seems to stock Mendall products.
@frischmarionette
@frischmarionette 9 лет назад
Hi Emma order direct by phone: (631) 242-9100 (Sheldon) fax: (631) 242-1734 MEND-ALL a division of •The ALNEY GROUP LTD 248 Route 25A, Suite 46, Easy Setauket, NY 11733
@frischmarionette
@frischmarionette 9 лет назад
The Frisch Marionettes Puppet Shows And be sure to order the Solvent too! Very important.
@danforest3251
@danforest3251 4 года назад
In case anyone else has this question, you can order Mendall products from mscdirect.com, bu they only ship to the USA for this class of products.
@kimyoung3484
@kimyoung3484 3 года назад
👍👍👍👍👍👍👍♥️♥️♥️♥️♥️♥️
@Watcherrye
@Watcherrye 3 года назад
Have a few questions. Is body piece better made with this apposed to say plastic resin or "Plasticlay" etc.? It seems that it would be rather fragile, does not know for fact, just observation. I am sure that weight is a factor . I doubt that you will answer my questions on this, but worth a shot.
@frischmarionette
@frischmarionette 3 года назад
It has been done. I have many puppets from the 1930-40s done completely with wood filler, even the feet😬. Personal opinion is it is not ideal. I typically make bodies from wood or at least a wood skeleton with stuffed cloth body. I wish I could answer regarding other materials but I decided a long time ago to stick with these materials to avoid other chemical exposure. Something to consider regarding the body is the finished weight. Some plastics and resins can be very heavy and difficult to repair. Wood filler, wood and cloth offer a great weight to manipulate and easily repaired. So it could be done and has been done but not the ideal choice especially for feet or hands that get clobbered. Great for heads though. I hope that answer helped a bit.
@blueyeen3747
@blueyeen3747 6 лет назад
Surely pressing paper mache sheets Into a mould would be quicker & easier?
@everettoneil1202
@everettoneil1202 5 лет назад
But not stronger
@meridethduran8642
@meridethduran8642 8 лет назад
I have a question you said that you used plaster seam an oil base clay could you give a manufacture name or a address where I could buy?
@Foleyboy09
@Foleyboy09 8 лет назад
+Merideth Duran It is not Plaster seam. It is Plasticine and you can get it in any art supply store. Roma is the brand I usually use, there are others though.
@frischmarionette
@frischmarionette 8 лет назад
Sorry Meredith, I missed the question. The modeling clay is "Roma Plastilina", an oil based clay. Usually grey or ivory colored. I refer to it as "plasticine". www.sculpturehouse.com/s-112-roma-plastilina.aspx
@frischmarionette
@frischmarionette 8 лет назад
+Foleyboy09 Thanks! I totally missed the question.
@Foleyboy09
@Foleyboy09 8 лет назад
Hey Kevin, Flanagan here. I haven't cast wood putty in years and gave up after plastic wood changed it's formula. Nice to know there is now a replacement!
@mmedeuxchevaux
@mmedeuxchevaux 7 лет назад
i suggest people use gloves and a mask.
@christopherpdufault853
@christopherpdufault853 3 года назад
This is a marvelous tutorial. I note that it would be desirable for users to read and follow all label directions and Material Safety Data Sheets (MSDSs) pertaining to how to protect oneself from exposure to Mend-all and solvents such as acetone. Note all hazard warnings on containers, including those for flammability. For example, for acetone, see: www.labchem.com/tools/msds/msds/LC10420.pdf For Mend-all wood filler solvent, see: www1.mscdirect.com/MSDS/MSDS00038/80390222-20171125.PDF I haven't been able to find a MSDS for Mend-all itself.
@user-fx7fi6hp4g
@user-fx7fi6hp4g 8 лет назад
Wood dough doesn't sell anymore I think. The formula they used before is different than now....it can't carve well and I just crumbles.
@frischmarionette
@frischmarionette 8 лет назад
+Random Guy There are several wood dough products on the market. Plastic Wood was the product that changed but it is still sold (doesn't work for this but is still sold). Mend-All is better than the original Plastic Wood when combined with the solvent. Using it for 30years now.
Далее
A Craftsman's Legacy: The Puppet Maker
25:22
Просмотров 87 тыс.
Handmade Worlds Puppet Theatre Festival
5:00
Просмотров 137 тыс.
НЕ ДЕЛАЙТЕ УКЛАДКИ В САЛОНАХ
00:43
Making Papier Mache Puppets - For All Ages
19:09
Просмотров 1,6 тыс.
Tutorial Marioneta de hilos
31:16
Просмотров 38 тыс.
Papier Mache Puppet Heads
7:26
Просмотров 100 тыс.
The Pilátová's Great Love for Marionette
8:31
Просмотров 32 тыс.
Wooden Puppet Parts (marionette heads and more)
24:09