From Manual Milling Machine to CNC Mill! #9 The First Chips!

Подписаться 26 тыс.

Просмотров 9 тыс.

50% 1

Now this is part 9 of the CNC conversion of a MANUAL MILLING MACHINE to a RETROFITTED CNC MILL. In this progress video I show the first movements of this machine. The CNC control will be executed with use of a AXBB-E CNC Ethernet Motion Controller and UCCNC Software from cncdrive.com. I'll show my configuration of the software and the HMI panel. And we will try to make some first chips!
CAD Model of the Mt Everest grabcad.com/li... uploaded by Frodo Zhou
If you find my channel interesting or helpful - you can consider becoming my Patron on Patreon.com or a Member of my RU-vid Channel Support!
Subscribe and hit the like button if you like the video and want more!
👉 / gbwm
👉 / @gbwm_cnc
Questions? - Comment down below.
Thanks for watching!
CNC Conversion of a Milling Machine: 👉 • CNC Conversion - Manua...
Milling Machine Restoration: 👉 • FUS 200 Universal Mill...
DIY CNC Metal Lathe Build: 👉 • DIY CNC Metal Lathe Build
Machine Builds: 👉 • Machine Builds (full v...
CNC Videos: 👉 • CNC
Welding Videos: 👉 • Welding
DIY: 👉 • DIY HowTo
Facebook Page 👉 / gbwmcnc
RU-vid Channel 👉 / gbwmweldingmachiningcnc
Twitter 👉 / gbwm6
Instagram 👉 / gbwm_cnc
Tumblr 👉 / gbwm-cnc
TikTok 👉 tiktok.com/@gbwm_cnc
Twin Musicom - Hero's Theme

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@wolfhausindustries Год назад

Congrats man, been looking forward to seeing the finished product that came from this project. Good stuff my dude!

@GBWM_CNC Год назад

I'm glad you were following my project. I'll post some more tests soon 😁

@mr.ranyhomemade2466 Год назад

Congratulations my friend, so complete for me but am glad you have done great jobs

@GBWM_CNC Год назад

Thanks my friend 😎

@rolanddube2169 Год назад

Congratulations! That is a great achievement, good work!

@GBWM_CNC Год назад

Thank you!

@Saori5613 Год назад

Incredible brother, congratulations 🎊🎉

@GBWM_CNC Год назад

Thanks! 😁

@nileshtonage7048 7 месяцев назад

Best video for Cnc conversation 👍

@GBWM_CNC 7 месяцев назад

I'm glad u like it! :)

@pawekowalski7469 Год назад

Gratuluję! Wyszło zaje.....iście!!👍👍👍💪💪😀 napracowałeś się ale było warto , piękna maszynka

@GBWM_CNC Год назад

Dziękuję! :D Pracy faktycznie było w opór, ale myślę, że można być zadowolonym z efektów :D Zobaczymy jak się będzie sprawować w praktyce 😄

@MillVIPCNC Год назад

Great job!! Congratulations 👏🏻👏🏻

@GBWM_CNC Год назад

Thanks! 😁

@gregoryaul2005 Год назад

Wow great job

@GBWM_CNC Год назад

thank you! :)

@gregoryaul2005 Год назад

@@GBWM_CNC your welcome it's very inventive 👍

@GBWM_CNC Год назад

Hello! This are the first test of my CNC milling machine made out of an old Milling machine. Note there were little issues with stiffness in Y axis guides so I had to take light passes in steel. I made some adjustments and now it works much better and I will share some real tests soon! :) Thanks for watching! :)

@jorgeo4483 Год назад

Creo que me he mareado viendo el panel. Esos servos son algo extraños, yo estoy pensando en usar Clear Paths pero no para fresadora por ahora, tengo algunos problemas con mi variador chino, no me facilitan software en NFlixN. Enhorabuena, comenta qué exactitud obtienes cuando midas todo.

@GBWM_CNC Год назад

@@jorgeo4483 Pronto haré un video sobre las medidas. ¡Gracias por ver! :)

@jimjackslak4507 10 месяцев назад

AMAZING!!!

@TrPrecisionMachining Год назад

good video GBWM

@GBWM_CNC Год назад

thank you Michel! :)

@pacmangsxr750 10 месяцев назад

well done

@GBWM_CNC 10 месяцев назад

😁

@AKdesigner95 Год назад

Świetna robota, gratuluję!

@GBWM_CNC Год назад

Dziękuję 😁

@DanielKarting Год назад

Buna si felicitari ! Din intamplare la aceasta masina nu ai un cap de mortezat. Am achizitionat o masina Fus 200 fara nici un cap.

@GBWM_CNC Год назад

Nu. Din păcate, nu mai am niciun accesoriu.

@banzaiwill7672 3 месяца назад

Great retrofit and documentation. How did you do the tuning on x,y and z in regards to the gain?

@GBWM_CNC 3 месяца назад

Thanks! Regarding the gain - I didn't do any tuning. From the begining the axes seemed to work well on the default gain settings so I didn't touch that at all.

@cristiancamelo4720 Год назад

Q joya de maquina

@GBWM_CNC Год назад

😁

@jf1206 Год назад

Buen trabajo!, ahora sólo le falta un cambio rápido de herramientas!

@GBWM_CNC Год назад

¡Gracias! Tienes razón, necesito pensar en algo.

@tutaganbi Год назад

Top 👌🏻👌🏻👌🏻

@GBWM_CNC Год назад

😁

@aubrymacielpereirafilho3017 Год назад

muito bom valeu muito obrigado!!!.

@GBWM_CNC Год назад

De nada. Obrigado por assistir :)

@poliproto2023 Год назад

Jesteś zadowolony z tych serwonapędów? Jaką dokładność na nich osiągnąłeś? Super projekt tak na marginesie!

@GBWM_CNC Год назад

Dzięki! Dużo testów jeszcze nie przeprowadziłem ale wstępnie dają radę bez problemu. Nawet musiałem obniżyć prędkość osi poniżej ich możliwości bo strach śmigać na F7500 przy prowadnicach na jaskółkach. Co do dokładności to wrzucę za niedługo jeszcze jakieś testy ale wstępnie większość wymiarów wychodzi w kilku setkach przy próbach, które wykonałem. Poużywam dłużej to będę w stanie coś więcej powiedzieć na ten temat.

@IceCreams62 8 месяцев назад

Hi. In SETTING-SPINDLE there are these two parameters: "M7 delay after ON:" and "M8 delay after OFF:" but in the UCCNC manual i read ......"M7 delay after ON: This is a numeric value. The software dwells for the set amount of time in milliseconds when a M7 command is programmed and after the Mist output goes active. M8 delay after ON: This is a numeric value. The software dwells for the set amount of time in milliseconds when a M8 command is programmed and after the Flood output goes active. So the info in the screen refer to ON and OFF state but the manual refer to ON and ON state. Do you know which is the right one ? The screen info or the manual info ???

@GBWM_CNC 8 месяцев назад

To be honest I didn't have a chance to check it out by myself. But I think it should be quite easy to check it out by yourself - just try to type a value which would refer let's say to 3 or 5 seconds and you will see how does it behave.

@IceCreams62 8 месяцев назад

@@GBWM_CNC Thanks. I will try as soon as possible

@IceCreams62 8 месяцев назад

@@GBWM_CNC Hi. Here the UCCNC Support reply : ""You're right, it's a typo on the screenset. M7 and M8 turns on the mist and coolant and the delays are after turning them on. The M9 turns off the M7 and M8, so the delay after off is for it. We will fix the screen, thanks for the input."" Hope this helps somebody else

@basedmonkey5622 Год назад

Great job. 4th axis would be very good, plans?

@GBWM_CNC Год назад

Thanks! At this point I wasn't thinking about a 4th axis. But maybe in the future - who knows! There are still some outputs free on the CNC controller for that 😄

@IceCreams62 Год назад

Hi. Which are the electrical connections to do to turn ON/OFF the coolant pump 'manually via the switch' and 'automatically via the controller' ?? I'm not able to figure out the connections i need to use the controller and the switch together 😞

@GBWM_CNC Год назад

I'd have to check how does it look on my machine - I'll be home tommorow so maybe I'll have a second to check it out (I don't remember exactly because I didn't fill the coolant tank yet)

@IceCreams62 Год назад

@@GBWM_CNC Not a problem, when you have time of course. thanks 🙂

@GBWM_CNC Год назад

@@IceCreams62 Hi! today I checked. I hooked up the pump relay (M8) to pin2 on port 1 in the and the manual switch is connected to pin 12 on port 3 with fuction number 510 (in the input trigger tab)

@IceCreams62 Год назад

@@GBWM_CNC Thank you so much, very appreciate 🙂 I will try as soon as my controller arrives.

@mihaidcdc1510 Год назад

Bine lucrat faină treabă, poți să zici și costurile până acum că și eu vreau să găsesc cineva să îmi facă freză fus 32 așa ca a ta

@GBWM_CNC Год назад

Mulțumiri! Am cheltuit aproximativ 3600 USD, inclusiv mașina în stare proastă și tot ce am folosit pentru a-l face să arate așa cum arată acum.

@jhonh3983 Год назад

Hola parcero, por qué no le montaste Linux cnc ?

@GBWM_CNC Год назад

¡Hola! Quería probar UCCNC. Es mucho más sencillo de configurar que LinuxCNC. También quería tener una conexión ethernet entre la máquina y la PC y para linuxCNC tendría que comprar el controlador MESA que tampoco era barato. En este momento estoy bastante contento con UCCNC.

@jhonh3983 Год назад

@@GBWM_CNC Entiendo, y maneja tiempo real como Linux?

@GBWM_CNC Год назад

@@jhonh3983 No estoy seguro de cómo funciona el software. Pero funciona para mí :)

@jhonh3983 Год назад

@@GBWM_CNC cuanto te costó la interface

@GBWM_CNC Год назад

@@jhonh3983 180.00€ AXBB-E + 60.00€ UCCNC