Another great video from FTC 🙏🏻❤️ THANKS FOR SHARE YOUR KNOWLEDGE and make easy the maintenance for cyclists. I think with this videos, if you have the tools, you know about mechanic it's very easy to do a lot of things on a the bike and do this in the correct way. I know the technical documents about Shimano and Fulcrum because my bikes are with Shimano components and Fulcrum wheel, I can say this guy is very serious because on details like torque and tips he is 100% correct with the official brands requirement and a video he's 10 time better than a document. A GREAT THANK YOU for you for sharing your passion, knowledges in all your PERFECT videos. 🙏🏻❤️
Hugely helpful as usual and hub is same as those found on other Fulcrum 'family' rear wheels. mine are Wind 40's. One very minor point bearing size should be 30 x 17 x 7 reference is correct. Redhill Bearings supplied Dunlop bearings which work a treat - another job done!
Your videos are so helpful!! But i can't figure out how to fit the quick release adapters on the rear wheel. I'm not shure even if I've done it correctly on the front wheel.
....can anybody help? :( Is the bearing 30x17x7 or 30x18x7 for rear wheel? And does anybody know the size for the front wheel? All historic comments about this are not very clear in my opinion... Many thanks! Jannik
the shimano TL FC33 tool is the same as the Campagnolo UT-BB130 tool? or there is a minimal difference in their design and teeth. because I have a TL-FC33.
@@FreeToCycle have you changed the bearings on these wheels or similar before...Just found a graft from fulcrum showing that the rear wheel uses a RP9-004 17x30x7mm and the front takes a RT-004 18x30x7mm...I guess there is quite a difference. Thanks for the response.
Just had this same issue. All removed bearings marked as 6903. Front needed Mr 18307. These were way too big for inner race of rear so trying to figure out what I need.
