Тёмный

FULL Guitar Build + Custom Control Knob & Demo | Making a Multi-Scale Electro Acoustic DREAM Guitar 

Crimson Custom Guitars
Подписаться 321 тыс.
Просмотров 87 тыс.
50% 1

Welcome to Crimson Guitars ru-vid.com... This is the FULL Nebula 2.0 Guardians of the Galaxy style Guitar Build in a single video.
In this series, Ben had been building the new and improved Nebula 2.0 as a custom order. • Making a Modern Multi-...
The owner of this guitar: The Gear Garage - www.thegeargarage.co.uk/
Thank you to Bear Branding for editing this mammoth project down into one video for you. www.bearbrandingco.com
Demo at the end by Mark from Pherotone Studios • Crimson Guitars Nebula...
Orange Amp - orangeamps.com/
Rajani Amps - rajaniamps.com/
Chapters:
0:00 Introduction
0:42 The beginning - Torrified and Flamed Sycamore, Ebony and Mahogany
1:00 Fretboard and neck
2:42 Cutting the veneer, gluing, and clamping the neck
4:16 Making a small router cutter
5:26 Gluing on the fretboard - the clamps go on - and the neck is begun
5:43 Inlay
7:26 Binding and headstock wings then the fretting
9:50 Working on the headstock and neck carve
12:47 Truss rod cover and side dots
13:53 Moving on to the body
15:24 Kerfing - how to build a table-saw sled and an acoustic body mould
16:37 Using the Bending Iron for the sides and making the kerfing and sound port
20:00 Concave sanding base and a Go-Bar Deck
22:15 Bracing, carving, strengthening, - working on the body and the neck
24:57 Veneer on the neck and the intricacies of attaching the neck on an acoustic build
25:35 The guitar is together! Already beautiful.
27:42 Sanding, sanding and more sanding and then on to the finish
30:27 The nut and spraying with lacquer
31:03 Custom tuner heads
32:12 Shiney - putting it all together to make a magical whole - and the Crimson Logo
35:54 The last few hurdles. Tuners - Pickup cavity - and that Bridge
39:12 The WIRING ! And a custom control knob.
43:22 The Demo
44:36 That's All Folks!
Music in this video: all from Epidemic Sound - www.epidemicsound.com/referra...
________________________________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - www.tritontools.com/en-GB
ISOtunes Bluetooth Hearing Protection - bit.ly/36YmKro
Wagner Meters - www.wagnermeters.com/
Leatherman - www.leatherman.co.uk/
Workshop Heaven - www.workshopheaven.com/
Support us by supporting our Partners, and at the same time, get yourself a great deal with ISOtunes. Use code "CRIMSON10" for 10% off your next order!
___________________________________________________________________________________________
WEBSITE: www.crimsonguitars.com
Luthier’s Tools & Supplies: bit.ly/LuthTools
Guitar Building Courses: bit.ly/LuthierySchool
Kit Guitars: bit.ly/KitGuitars
SOCIAL
Instagram - / crimsonguitars
Facebook - / crimsoncustomguitars
Patreon - / crimsonguitars
OTHER
Ben's Vintage Tool Shop - vintagetoolshop.com/
_________________________________________________________________________________________
Thank you again for all your support, we really appreciate it! - Ben
Stay tuned and stay awesome!
_________________________________________________________________________________________

Хобби

Опубликовано:

 

25 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 217   
@ApolloMMCXIII
@ApolloMMCXIII 2 года назад
I love this guitar, it's so well done! My heart still belongs to that hollow body fanned fret explorer as my favorite build you've done though. Can't wait too see what's next!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
good call.. I REALLY want to explore (lol) that build style some more!
@michaelnugent9758
@michaelnugent9758 2 года назад
@@CrimsonCustomGuitars Please do, Ben! One of my favorites as well!
@qvankesteren1683
@qvankesteren1683 Год назад
After watching this i realised live is not about the things done to the world by others, but about the things we make and do. Ive been depressed for the past 2 months now, lost my dog qnd a good friend, and from watching this build multiple times im making my own guitar and getting better in my head. Thanks soo much Ben for all the great things you make and say, you could say you and the comunity you created saved my live. Thanks!
@scottbehl216
@scottbehl216 2 года назад
I'm 12 minutes in and I must say, THAT NECK IS A WORK OF ART SO FAR !! It will be nice and stable !
@TonberryV
@TonberryV 2 года назад
I watched this whole build as you were releasing them and it's still an absolute treat to watch this take shape again.
@SMAAAASHTV
@SMAAAASHTV 2 года назад
I appreciate the parts of the build with no music playing in the background. Very relaxing to watch.
@mikeking5574
@mikeking5574 2 года назад
I watched the full series and still watched the recap.. absolutely love this guitar!!!! Legendary build x
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you Mike! me too
@mikeking5574
@mikeking5574 2 года назад
@@CrimsonCustomGuitars dare I say it...... Nebula 3?
@shannonfamily
@shannonfamily 2 года назад
This is the most beautiful guitar I have ever seen. It has so many little things that I love or use all rolled into one without being messy. Stunning
@darkforce2803
@darkforce2803 2 года назад
The guitar is absolutely stunning! It is so much fun watching you build and problem solve. That said, the demo sounds quite out of tune. Either that, or the guitar does not intonate well, but I guess with that floating bridge design it would not be a problem to fix it. Looking at it again, the bridge actually looks like you compensated it with a wound G string in mind, but in the demo it is strung with a plain G, so maybe that is the problem?
@scottbrown8142
@scottbrown8142 2 года назад
At the risk of sounding like a nerd, watching your videos are very relaxing for me, the craftsmanship is just amazing … Can’t play any type of musical instrument just enjoy watching everything come together.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Hey Scott, thank you for this. In my mind I am mostly 'just' a teacher, the fact that people watch with no intention to actually build a guitar is actually far more of a compliment! Thank you!
@tonyleeke5969
@tonyleeke5969 Год назад
A wonderful guitar, and it's amazing to watch a master craftsman at work. Please keep posting these great videos, Ben.
@hexane8
@hexane8 7 месяцев назад
If there is a higher spirit in this universe it is one that loves to see us creating and loves our creations
@flossyphp
@flossyphp Год назад
I keep coming back to watch this. Such a beautiful guitar. I'd love something like it.
@AManCalledMoose
@AManCalledMoose Год назад
utterly stunning, one of , if not the most beautiful guitar ever IMHO, A true work of art
@mrfatbobrider1969
@mrfatbobrider1969 2 года назад
Always great to see a build more than once..and I guess the look of ones tool doesn't matter if it has functionality
@T-800..
@T-800.. 2 года назад
When I watch something as beautiful as this being built, I like to think that in 100 years or so that there will be a restoration video on future RU-vid like there are restoration videos today. The only difference being is that the future folk will get to watch the original craftsman building it too. Awesome work, Ben. Also, if there is any future folk actually watching reading/watching.. your great grandmom! 😁
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
I have never once considered this possibility! So cool :)
@kalvinhill5308
@kalvinhill5308 2 года назад
You are the most fascinating watch on RU-vid...Like a mad genius whose attention to detail is second to none. Just a bad ass!
@tebbsy
@tebbsy Год назад
A pure joy watching you work, and what a beautiful guitar. Words fail me!
@Splattle101
@Splattle101 2 года назад
I love watching the work of a person who loves their job. I learn so much.
@andrewmacfall3393
@andrewmacfall3393 2 года назад
Your craftsmanship is unbelievable. WOW
@Emily_M81
@Emily_M81 2 года назад
Another amazing build, thanks for sharing! Hard to know which took longer, building the guitar or the editing for such a long video filming it being made XD I love when you whip out a tool I've never seen, like the giant "spatula saw" :D
@Woodroffski
@Woodroffski 11 месяцев назад
I don't work with wood; I work with metal, but there is some crossover in handskills. Knowing what I know about my trade I can say that your handskills are truly incredible.
@redeyedrednek
@redeyedrednek 2 года назад
Great work Ben. That thing is absolutely beautiful.
@mfnbpwnz
@mfnbpwnz 2 года назад
This is easily the best looking guitar you've made on this channel. Absolutely love it.
@D4veJap4n
@D4veJap4n 2 года назад
Agreed
@ProthoPectore
@ProthoPectore 2 года назад
the oil slick look really worked out. never thought you could recreate the aesthetic so well. extraordinary attention to detail. gorgeous guitar.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you very much!
@benink5690
@benink5690 Год назад
No exaggeration here. I want this guitar more than any other guitar in existence.
@VAXHeadroom
@VAXHeadroom 2 года назад
Editing is next level on this. Great job!!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
thank you, I'll tell Bear
@D14V0R05
@D14V0R05 Год назад
Man, making an acoustic guitar is so much more work than with a solid body build.
@james94582
@james94582 2 года назад
Another gorgeous guitar!! Wish I had a 1/4 of the skills you have!!
@oakvikinger
@oakvikinger 2 года назад
This is Awesome! So glad I found your channel, very elegant work... makes me feel like a true wood butcher! Looking forward to seeing more builds
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Welcome aboard! And you should see me fumbling around when I am out of my element.. a destroyed a chunk of wood trying a long rip cut by hand the other day, looked like I had never held a tool in my life lol!
@oakvikinger
@oakvikinger 2 года назад
@@CrimsonCustomGuitars lol! It happens! :)
@danielchristensen4780
@danielchristensen4780 2 года назад
Phenomenal. Inspired. Masterfully executed. Such talent. What an amazing instrument.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Glad you enjoyed it, thank you
@jerryv9138
@jerryv9138 2 года назад
2:36 WELL PLAYED Video Editor.... Well Played!! =)
@devaojasmantra2038
@devaojasmantra2038 2 года назад
I forgot how absolutely everything on this guitar is beautiful 🤩 my favorite build and please … keep delaying deadlines if it’s for creativity and beauty 🙏🏻
@blackforestbeamer
@blackforestbeamer 8 месяцев назад
lovely woodwork!
@thorstenkonig552
@thorstenkonig552 Год назад
lovely - great work!!
@AmyrAbadawn
@AmyrAbadawn 2 года назад
I love all your guitars!
@jimbobjoe
@jimbobjoe 2 года назад
this one was a really fun journey ben. outstanding work.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
thank you Luke.
@watchnlearn2731
@watchnlearn2731 2 года назад
By far the most beautiful guitar you have ever made.
@sunlightpictures8367
@sunlightpictures8367 2 года назад
You've really outdone yourself this time! This is freaking art. Well done.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you. DC
@michelepolacco6305
@michelepolacco6305 2 года назад
I'm crying. For real. It's beautiful
@Craftlngo
@Craftlngo 2 года назад
rewatching the whole build, I have to say this is your absolute master piece!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
it certainly gives me a benchmark to work to moving forward.. thank you
@habbahan
@habbahan 2 года назад
Great looking guitar, Ben!
@stefanfilipov7254
@stefanfilipov7254 2 года назад
I'll be damn, this build was an absolute blast dude! I thought to myself you should name this guitar something cosmic, since it really looks like a nebula, and then I saw it is actually Nebula 2.0. Nice!
@lone-wolf-1
@lone-wolf-1 2 года назад
This guitar is a piece of art! I would wear white cotton gloves and a white tuxedo to play it! I would like to see Ben go nuts on an electric with opulent ornaments. With inlays of different materials, binding out of unusual materials, engraved everything (tuner, bridge, jackplate, even special screws…), using opals, minerals, silver and gold and even diamonds, the scratchplate with breakthroughs, little carvings here and there, hidden features (f. ex. a little „drawer“ with adjustment tools, Salvador Dali refference)… Like a monumental instrument for display. Could fill a whole year with 30-40 episodes. (Maybe I‘m just crazy… 🤭)
@dontsigninattheapplestorew4572
@dontsigninattheapplestorew4572 2 года назад
I’ve watched your videos for like 2 years now Ben. Never commented on any RU-vid vid de gore but I’ve left it more than long enough now to say what a pleasure it is to watch you work. A true artist and craftsman with a love for the vintage way of doing things. The surface, colour and finish of the nebula 2.0 is one of the most stunning things I’ve ever seen. I would call it a masterpiece. It’s been so good watching your channel, your business and yourself grow over the last couple of years and I just hope you do mentoring for some keen, appreciative apprentices because craftsmen like yourself, at least in my own personal experience are hard to come by. Not got a man crush of any sort btw haha, just a woodsman myself and love your love of the craft as well as your awesome talent 👍🏻
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you so much for all the positive comments. We wish you a good 2022. DC
@D4veJap4n
@D4veJap4n 2 года назад
Some friendly critical advice, Ben: That’s the most beautiful acoustic guitar I’ve ever seen. So take that on board and let’s move on together. Cheers :)
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Noted! :)
@rakentrail
@rakentrail 2 года назад
The top looks like an abstract uterus! Really cool concept!
@Jungleroomreptiles
@Jungleroomreptiles Год назад
Absolutely stunning 🤩
@flyingfish88888
@flyingfish88888 2 года назад
legendary build mate!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
thank you :)
@jimmayo1651
@jimmayo1651 Год назад
It's amazing so far thank you very much
@pjs9346
@pjs9346 2 года назад
A madd genius. Talented beyond belief. Master Craftsman. With such a dry whit about him. Waiting to view the next project. My only wish is tobe the care taker of this creation.
@adamhoward5145
@adamhoward5145 2 года назад
1 amazing craftsman, 1 beautiful guitar.....enough said!
@robe.739
@robe.739 Год назад
Looks amazing
@devasyavlog8850
@devasyavlog8850 2 года назад
Keep the spirit on, sir. Well done !!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you kindly
@VTRAddict
@VTRAddict 2 года назад
The little router plane may not be the prettiest tool in existence, but it's definitely pretty enough... And there's something special about making your own tools for a specific job. I have a brass scraper/chisel I made specifically for removing excess epoxy from finished knife blades (I'm a knifemaker) with tiger maple handles and mosaic pins. It's a lot prettier than it needs to be to do the job, but it puts a smile on my face every time I use it...
@atakdragonfly1675
@atakdragonfly1675 2 года назад
This is the finest multiscale anything that I've ever seen. By far.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you 😀
@atakdragonfly1675
@atakdragonfly1675 2 года назад
@@CrimsonCustomGuitars you're the best. My favorite by far... I need to come visit you over there!
@ironblast5
@ironblast5 2 года назад
This is incredible
@isaiahgonzales6193
@isaiahgonzales6193 2 года назад
Just wow! That build was amazing. I will own one of your guitars, someday.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
He is raffling the guitar he is making on the Livestream. Follow the link in the description on one of the super edits you can buy a ticket. £1 each and the raffle ends 22nd January. DC
@brunoberti7268
@brunoberti7268 Год назад
It’s impressive, beautiful. Your care with the whole fabrication process is amazing. Congrats!! And I’m just wondering… this wood is so beautiful… how whould it be just varnished!
@DarkTubeToo
@DarkTubeToo 2 года назад
Ben to call you an artist is an understatement. Everyone has a gift handed down to them by God. Most people don’t find it. You obviously have and you have honed it. Exquisite piece. You keep making videos and I’ll keep watching. Stay blessed!!!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
thank you so much. DC
@LoveLindqvist
@LoveLindqvist 2 года назад
Holy crap man, good job!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank-you 😀
@jackkress3238
@jackkress3238 2 года назад
Awesome guitar!!!!
@Kenji1685
@Kenji1685 2 года назад
This is awesome! How will you top it? I can't wait to see more of the baroque inspired one. ❤️❤️
@benhightowerv
@benhightowerv 2 года назад
Not me over here drooling and only 27 minutes in. Absolutely beautiful work.
@mikedaknight1079
@mikedaknight1079 2 года назад
Ordered a bit of tools I need, I think making inlays will be my favorite, I'm carver so I can't wait to make my first guitar
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you for your support, as a carver you will have a blast with guitar building!
@MrAngelo1955
@MrAngelo1955 2 года назад
a great custom- unicat guitar ,looks nice i love it, lg jeff ;-)))
@jamesm1938
@jamesm1938 2 года назад
Would LOVE to have a step by step on the finishing process from initial staining to lacquer, including colors. I am doing a father/son build as we speak for my son who is studying astrophysics. This finish would just blow him away!!!
@WV591
@WV591 Год назад
Imagine if you did this back in the 60s, Page and Clapton and Beatles and hundred more would want these guitars.
@BraMKJ
@BraMKJ 2 года назад
The back of that headstock always reminds me of Finding Nemo :D Awesome guitar though!
@jozsefizsak
@jozsefizsak 2 года назад
Astonishing.
@vinztattooerartguitars
@vinztattooerartguitars 2 года назад
Amazing work. I love ! Maybe one day, I can do the same work 😁😉
@timm3376
@timm3376 2 года назад
I'm always amazed at the level of craftsmanship in your work. I built one 5 string throughneck Bass that works amazing like I planned it. Watching your videos has given me ideas and techniques to apply in my work. Thanks for the videos. Do you have certain made steel chisels that keep a super sharp edge? I cannot seem to get a razor sharp edge with cheap steel.
@stephenkeen6044
@stephenkeen6044 2 года назад
Hope you don't mind me adding my own 2 cents here, but in my humble opinion Narex chisels are great "bang for the buck". Not too pricey, but well made from good steel and they keep an edge very well.
@andrewking2590
@andrewking2590 2 года назад
what I like about Ben's custom guitars is, it's like watching a custom chopper being built, but where the chopper is hard to ride and noisy as hell; like a custom chopper, Ben's guitars are beautiful to look at, but they are 110% functional.
@weijingburr2392
@weijingburr2392 Год назад
That's a pretty thing. Very nice.
@alriveromusic
@alriveromusic 2 года назад
That little router made out of a scrap piece of wood and a sharpened Allen Key was great. Also, loved how the finish just came to life with the lacquer! PS: I had been wondering who this Bernard character was?
@lotusmark2
@lotusmark2 2 года назад
Ok, I have resisted GAS for two years!!! So much “want” for this (or at least my ideas on it 😜)
@luthiferbuilds
@luthiferbuilds 2 года назад
love how an acoustic build has the heaviest back ground tracks over all your other videos! love this guitar, you are a true master
@ianthomson9363
@ianthomson9363 2 года назад
It's always good to see a full build in one go and marvel once more at the refinements, care and original design ideas that go into Ben's builds. But the sound wasn't up to the usual standard- very low level for some reason and much quieter than the ads. Otherwise, a great job of the editing!
@austin4x
@austin4x 2 года назад
I felt that was because the demo was really just showcasing it's acoustic abilities without showing off what it can do with some gain and distortion tossed at it. Could be wrong.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
good point, new editor with a different rig and I didn't think to check the actual volume levels across videos. thanks for the headsup though! And I will tell Bear you liked the edit, I am very excited to be working with him on super edits and some other one off build videos..
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
we really should have played with the sound a bit more.. distortion is a MUST imo
@ianthomson9363
@ianthomson9363 2 года назад
@@CrimsonCustomGuitars Most definitely!
@dismafuggerhere2753
@dismafuggerhere2753 2 года назад
Stunning
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you! 😊
@dalgguitars
@dalgguitars 2 года назад
Beautiful. Fun. thanks!
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
Thank you 😊
@seancassidy4812
@seancassidy4812 2 года назад
A functional art piece.
@gregoryh4601
@gregoryh4601 2 года назад
Dear Ben. You are a awesome Guitar 🎸 Maker. Love the Design,Color,Finish, and the Sweet Sound it Makes. Dam wish this Old Dog could Learn New Tricks . Ben ever thought of Coming to America to Teach Guitar Making? God Bless you and Family. PS. How Did Daughter light Guitar turn Out?
@ianb4801
@ianb4801 2 года назад
With respect, this version of the Nebula 2 guitar appeals far more to me than the series with all the episodes. Granted you used aspects of an acoustic guitar build this time, but generally you use so many forms of the same techniques on all of your custom guitars - and I don’t need to have such things as the “masking tape & super glue trick” explained to me each time. If you put a play list link in the notes pointing to the various full videos then surely that’s perfect and I can zap across to look more closely if I need to. But fact remains, this is a wonderful instrument (except for the string pins for the ball ends because, surely they’re going to snag badly.
@Stu66orn
@Stu66orn 2 года назад
Hi! Could you answer on one of your streams if you use a neckjig for leveling frets. How necessary you consider dial indicators on that. It is worth the time making leveling simulating string tension? Thank you!
@ashwinsuresh2328
@ashwinsuresh2328 2 года назад
The guitar looks absolutely beautiful! but I would've added another pickup near the bridge, it sounds a bit empty and tinny to me.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
we could do that for you if you want one, I would love to build that!
@lelcecc4793
@lelcecc4793 2 года назад
agreed… and maybe it would sound halfway decent if it was in tune (but - who knows - perhaps that’s not even possible)
@NikWicker
@NikWicker 2 года назад
@@lelcecc4793 let's see yours then?
@neilmurphy276
@neilmurphy276 2 года назад
How can people put this guy down, I'd love to see your builds
@piemmetubo
@piemmetubo 2 года назад
Awesome job, thank you!!! When do you plan to publish the next video of your daughter's ultra-light gruyere guitar?
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
:) soon.. ish, the finishing is taking longer than I hoped. I can split it into 2 episodes though to keep it interesting.. in fact, that is what I'll do.. so sometime in the next few weeks.
@tonymurphy2624
@tonymurphy2624 2 года назад
For dot inlays and other fiddly cylindrical bits and bobs, you should have a look for locksmith's pinning tweezers. You'll find them indispensable once you convert.
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
oh hell yes, I didn't know I needed these until this very minute! Nice one, thanks :)
@liamadams7322
@liamadams7322 Год назад
Mate, can we talk about your anechoic style ceiling tiles there? They look wicked!
@Eyesofthasouth
@Eyesofthasouth 2 года назад
Sweet! At 9:12-“On with the Show” brother… Motley Crue
@patricknepton8602
@patricknepton8602 Год назад
shes beautiful
@remsangachhakchhuak1738
@remsangachhakchhuak1738 Год назад
I wanna see more clearly how the neck is beiñg joined to the body and will it be strong enough to support the tension of the strings?
@elyrichardson4172
@elyrichardson4172 2 года назад
Oh crap! ❤️
@user-zp7vm5zz4v
@user-zp7vm5zz4v 9 месяцев назад
I’m American and I love this channel but what the best way to learn to make guitars
@CrimsonCustomGuitars
@CrimsonCustomGuitars 9 месяцев назад
Everyone is different. You can learn from books, the internet or go to a credited Guitar Building School. There are hundreds in the States and I am sure that you would be able to find something to suit luth.org/resources/lutherie-schools/lutherie-schools-usa/
@andrewking2590
@andrewking2590 2 года назад
Ben, have you ever done metal wire inlay on a guitar?
@thomasburkhard2784
@thomasburkhard2784 2 года назад
Nice
@rogerhuamani8756
@rogerhuamani8756 2 года назад
Ben you're inspiring
@jaycarlson1073
@jaycarlson1073 2 года назад
Where do you get your trust rods?or do you make them yourself?
@jamiethompson8481
@jamiethompson8481 2 года назад
Hi Ben , what is your home set up for spraying Laquer ? Thank you :)
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
outside on a non windy day, for now.. I toyed with setting up a tent but in the end I have a real spray boot just down the road to use so haven't bothered doing that yet..
@jimmygrant3151
@jimmygrant3151 2 года назад
Cool.
@VTRAddict
@VTRAddict 2 года назад
Is there a reason you used wood glue instead of superglue on the frets in this build? That seems to be the "standard" thing most builders I've watched use? (as well as you on some of your other builds!)
@A_Stereotypical_Heretic
@A_Stereotypical_Heretic 2 года назад
It's amazing to me how people see beauty so differently. It's so subjective...yet in general were all seeing the same geometry and colors. Maybe I'm thinking about this too deeply loo
@CrimsonCustomGuitars
@CrimsonCustomGuitars 2 года назад
you are spot on, beauty truly is in the eye of the beholder. in my opinion this is one of my prettiest guitars ever.. but there are others out there who HATE her.. it is what it is. was fun to build either way :)
@A_Stereotypical_Heretic
@A_Stereotypical_Heretic 2 года назад
@@CrimsonCustomGuitars I think it's definitely intricate and I totally respect the love you put in it. Things don't have to be aesthetically pleasing to be beautiful IMO. This happens to be both. Good game old chap good game
Далее
Baritone Guitar - COMPLETE BUILD
24:10
Просмотров 27 тыс.
would you eat this? #shorts
00:36
Просмотров 2,1 млн
Guitar Making But More Complicated | GGBO 2023
14:29
Просмотров 65 тыс.
I made a guitar from IKEA furniture. How does it sound?
22:58
телега - hahalivars
0:12
Просмотров 13 млн
рыбалка пошла не по плану🤯
0:19
20 июля 2024 г.
0:58
Просмотров 3,5 млн
ТАТУ пришлось ПЕРЕКРАСИТЬ
0:20