No video :(

FULL SANWA M17 VIDEO FOR NO PREP DRAG RC | RMODE | CUSTOM| CURVES

Подписаться 12 тыс.

Просмотров 10 тыс.

50% 1

paypal.me/DORK...
BATSAFE
amzn.to/3EF0HHq
DISCHARGER
amzn.to/3koh7fg
MARKS TIKTOK
www.tiktok.com...
DURBO BALANCER
amzn.to/3sTTEoP
MODELING CLAY
amzn.to/3ytcy77
SXT TIRE COMPUND
amzn.to/2WAlgDG
ASSOCIATED DR10 FULL RTR
amzn.to/3pCqO9N
DUMBORC RADIO AND RX
amzn.to/2LbvGUg
MILWAUKEE DRIVER
amzn.to/2KJaeq8
MY CAMERA STUFF
Manfretto Clamp
amzn.to/3ncmpZL
Manfretto Magic Arm
amzn.to/2KTXhtx
Manfretto Flex Arm
amzn.to/3hxncmx
Manfretto Stud
amzn.to/2KTXCMP
Phone Mount MEFOTO
amzn.to/2X1gSdC
USB MIC KIT
amzn.to/3pCzGvX
Logitech C922
amzn.to/3rTyo1Q
USB EXTENDER CABLE
amzn.to/38RriC1
BUILDING SUPPLIES
MIP DRIVERS
amzn.to/2RRwUUA
MIP DRIVERS FOR DRILL
amzn.to/36q6kqD
WELLER SOLDERING IRON
amzn.to/2By3yQF
TIPS
amzn.to/2GjaViG
TIP CLEANER
amzn.to/2Edjr1W
KESTER 60/40 SOLDER
amzn.to/2tFUMPx
KESTER 63/37 SOLDER
amzn.to/2MDtjVZ
KESTER FILED SOLDER
amzn.to/2tSlYKe
FLUX
amzn.to/2FlWedB
HEADBAND MAGNIFIER
amzn.to/2BwMqLd
XT-30 MALE/FEMALE CONNECTORS
amzn.to/2zHtqhC
M2 STANDOFF KIT
amzn.to/2unoERi
M2 SCREW KIT
amzn.to/2NTiKiG
3D PRINTING
Anycubic Photon Mono
amzn.to/2KH4HQT
Anycubic Wash n Cure 2
amzn.to/3ohvPVb
NOPREPRC
Proline Beadlocks Rear
amzn.to/34WO6iU
Proline Reactions
amzn.to/350ut9A
Tire Glue
amzn.to/3o3KN0R
Associated DR10
amzn.to/3pCqO9N
BODY MOUNT MAGNETS
amzn.to/31CMoRp

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@jeffbarclay8034 2 года назад

Thanks for taking the time to share your knowledge with everyone, it has helped level the learning curve for me a lot! Based on your videos I picked up an M17 and have been impressed with the relative ease that advanced programming can be done. Having said that there is a feature that I think is a must have for anyone that finds themselves making the same tuning adjustments repeatedly. Sanwa calls this alternates (I have known it as shift mode on other systems) and it gives you the ability to assign 1 button/switch to toggle alt mode and then reassign as many switches / buttons to new tasks. So instead of going into config mode or even a custom screen I can hit switch 3 to toggle then have trim1 control throttle forward, trim2 control throttle point setting (you get the idea now) hit switch 3 1 more time and i am back to normal operations. With the number of assignable functions available this is a powerful feature that I have not seen anyone else cover that needs to be shared. Check it out and let me know what you think.

@Dorkyand40 2 года назад

awesome man. being able to assign those functions to the buttons is super powerful. i do a lot of that with my fpv quads and the edge tx software. ill check it out!!

@murrijuana2842 2 года назад

@@Dorkyand40 at what point do the cars just drive themselves? All this computer junk ruins the hobby, or as you would say the "sport"? Also, you wouldn't guess you've got a day job by the way you pretend to not beg for cash.

@Zekers87 Год назад

Great video again just got my sanwa in today....... this thing is amazing automatically lowered my times just with your video and the radio

@Dorkyand40 Год назад

Thanks man. There’s a few more videos I’ve done on m17. Appreciate it

@sethjeffreys3055 2 года назад

You Rock ! I appreciate the time and knowledge you have shared for us !

@Dorkyand40 2 года назад

Always. My pleasure man!

@Rolblox_girl 2 года назад

All his videos are "educational". My opinion. That's what got me hooked. I needed to know certain rc solutions and he basically showed me how to solve my problems. Good job bro. edit..... but I use a flysky nb4.

@Dorkyand40 2 года назад

Thanks. It’s all good :)

@rapdfyr1 2 года назад

Another video full of good info. I had no idea how to adjust expo til now. Thanks Chad

@Dorkyand40 2 года назад

Awesome let me know if you have more ?

@rapdfyr1 2 года назад

@@Dorkyand40 I do have some questions about using the log data to determine under / over gearing or battery short comings .

@Dorkyand40 2 года назад

Ha. I’ve been playing with that again lately. It’s turning into a preference thing. I can get results using day different gearing just going off final drive but the car will drive way different.

@aspavingllc8302 2 года назад

What does r mode do?

@Dorkyand40 2 года назад

It allows you to setup all of these settings into a profile in a basic sense.

@losoknoso3151 2 года назад

Your content is by far the best for no prep hands down💯

@Dorkyand40 2 года назад

Thanks man. Makes me feel good hearing that.

@mathewclifford2048 2 года назад

Thanks man another great video, explained it all very well

@Dorkyand40 2 года назад

Thanks man. I tried. The iPad idea I think worked good

@mathewclifford2048 2 года назад

@@Dorkyand40 yea definitely man, your videos have definitely helped alot fpr me as it's made me realize for this summer here in New Zealand I will race 13.5 class and wait till your guys next season to build a carbon car. Keep up the good work man

@Dorkyand40 2 года назад

Nice. Good to hear it’s going on down there. 13.5 is a tricky class here because there’s not as much money going into it. It was supposed to be a fun class but was undermined by a 13.5 motor that is really a 10.5 that people run. They’re as fast as I was 4-6 months ago now

@mathewclifford2048 2 года назад

@@Dorkyand40 we are lucky there is not really money to win here and our 13.5 class is roar approved motors on a blinky mode esc so we can have a much more fun very competitive class

@StreetSweeperTv 2 года назад

Team Dorky&40 what we’ve been waiting for just more! Lol Thanks Bro we all appreciate it 💯💪🏾

@Dorkyand40 2 года назад

Anytime man!

@Gazelle0078 2 года назад

Bad ass comprehensive video bro. Downloaded it for on the fly reference. Thank u so much

@Dorkyand40 2 года назад

Fantastic. Hope it helps my man.

@paulkennedy9596 2 года назад

I am New to NPRC. Thank man. Great Videos and Thanks for the Help.

@Dorkyand40 2 года назад

Awesome man and welcome. Let me know if I can cover anything for you. Lots on info here.

@paulkennedy9596 2 года назад

@@Dorkyand40 I have been watching you for awhile. You do a great job at covering a lot. Started to build up a DR10. Thinking about getting a brisket Chassis for 13.5 next year.

@StreetSweeperTv 2 года назад

Excellent!!!!! Next let’s learn about shifting. Love the video

@Dorkyand40 2 года назад

Ha. Maybe. Lot to do in 2s lol

@TurboGaming86 2 года назад

What’s up chad thank you for your videos I really appreciate your help ….. can you please explain a little more on r mode on how exactly to use it and the functionality of it I still quite don’t understand it

@Dorkyand40 2 года назад

think of r mode as profile. so you can create different proifiles per say (settings) inside of a model. so when you first turn on rmode you can select how many you want to make. so lets say you select 2. now you can go in and set up all the settings for these 2 r modes and lets say they are all the same except in r mode 1(profile 1) you have your dual rate at 100 and a speed of -95..but then if you select r mode 2 then you might have dual rate at 85 but a faster speed ramps of -94. so you have instant access to test and figure out what works for your car. i honestly only use 1 mode now. the only reason i would make a second one is if i would like to make a (gear shift) where ievery setting is the same except one has a dual rate of 90 and the other 100. so if im racing and im getting beat i can press the button and it will change to that other mode and boom the power band is shifted magically to that r mode with 100 dual rate. i hope this helps. keep it simple. just turn it on and add like 3 r modes but only work on r1. once you get used to the menu its just as easy to change settings.

@OgaugeTrainsplusslotCars 2 года назад

Thanks for sharing

@rccorvette3303 4 месяца назад

Wish you come out with a video for Futaba xp10

@Dorkyand40 4 месяца назад

yeah no more drag racing here so not going to happen

@1dirtovalracer 10 месяцев назад

Do you have any videos of the Futaba on how the drag software works?

@Dorkyand40 10 месяцев назад

only tried futaba once then went to sanwa

@mikethompson7610 2 года назад

Thanks for the great video.

@Dorkyand40 2 года назад

Always

@SIRICKO Год назад

If this controller is Allowed in for no prep racing then gyro's should to it's All tech!

@gravityracergt 2 года назад

Good video but I just have one thing to say. You may be getting. 2.05 second run with the Speed set on -95 but the actual ramp from 25%-100% is happening in about .8 or so seconds.. Way to test it is look at your remote and pull trigger while using the stop watch on your phone. Start the stop watch as soon as you pull trigger and stop it when the remote throttle indicator reaches 100% and you’ll see what I mean. Overall good video.

@DessiLu14 2 года назад

Is the -95 setting 2.05 seconds from 0-100 percent throttle ?

@Dorkyand40 2 года назад

With a point of 0 and no curve the radio time for -95 is 1.03 seconds to 100. -96 is 1.26.

@DessiLu14 2 года назад

@@Dorkyand40 Thanks for the response Chad . This is exactly what I needed to know. It takes 1.26 seconds for the throttle to go from 0-100 forward setting set to -96 with point of 0. Now lets say you put the point to 25 percent , the -96 forward setting will put the 25-100 to 1.01 seconds ?

@Dorkyand40 2 года назад

Since we are dealing with no other variables I would agree.

@Midwest-RC 2 года назад

Awesome video

@Dorkyand40 2 года назад

Thanks Tim!

@TheRealTrickle 2 года назад

I use my R-mode but that 2nd gear is my "oh shit" button 😆

@Dorkyand40 2 года назад

That’s one way to do it :)

@SAMBACKER49 2 года назад

Whats your favorite for NPRC tuning the Sanwa M17 or the Futuba 7pxR???? Thx and love your channel💯

@Dorkyand40 2 года назад

The m17. It’s got the best features for throttle and steering which is equally important that few talk about. Look for my going straighter video for a demonstration. Thanks bother

@steverscos 2 года назад

great video! can i ask what settings do you change in r mode just on for D/R and speed? thanks

@Dorkyand40 2 года назад

I change a lot. Check out my go straighter video for the steering changes and then my reaction tire video for speed details

@DessiLu14 2 года назад

What's up Chad. For the speed setting -95 . The time from from 0 to 100 exactly 2.05 seconds? Or is that just a rough estimate?

@Dorkyand40 2 года назад

Replied to the other comment of 1.03. But that’s in a perfect world. I’m looking at my data and with my current settings I’m around 1.4ish with a maybe a little more. So half track or before is where I’m aiming but with the -96 ramp since it’s a little less aggressive and can play a little more with the other settings. If things are really popping and infeel confident I’ll make one change on the radio to -95 and see if it sticks vs a dual rate shift. I seem to be ok at 100 dual rate or epa with the r1 tune I have.

@joshherrman3201 2 года назад

I've been watching Mark's post on this and your's Chad. Have you done anything differently with your settings on this now your R1? You should do a update post on this. I think im going to finally pull the trigger on the M17.

@Dorkyand40 2 года назад

Some is different. It is going to be my next video. Hopefully in a day or two. Full tuning video with m17 r1 and castle.

@joshherrman3201 2 года назад

@@Dorkyand40 awesome Chad I can't wait.

@Nhra456_ 2 года назад

Can anyone explain to me. Is there a difference between a m12 and m12s? Thank you

@jimc3468 2 года назад

Only have to watch this 5 or 6 times

@Dorkyand40 2 года назад

It’s a lot for sure :) but it’s all in one spot. Every video I’ve ever sought out snd all my testing for my 2s car

@mally_mal820 2 года назад

hey, can you do a trans brake switch for m17?

@Dorkyand40 2 года назад

Sure. You can program a switch to cut throttle to zero pwm value easily.

@mally_mal820 2 года назад

@@Dorkyand40 I've done so, but if you sit and hold the throttle for too long, it will mess with your initial hit. can you make a video show how you do it.. say you have your button held and holding full throttle, if you hold it like that for, say 10sec, does affect your throttle hit?

@Dorkyand40 2 года назад

I’d need to take a look at it. I’ve never seen a need for a trans brake because I want the car to launch slightly hard and smooth so the ramp and point settings is all I have felt the need to adjust. But yes the mixer in the m17 is powerful so it could be done

@kevinslawinski4917 2 года назад

What do you think about the rc6gs? I know it's a cheaper radio but it looks like it has some similar features.

@Dorkyand40 2 года назад

Hey Kevin. So I always am right up front. I have never used it so can’t really comment on it. But I can tell you my facts in my journey. Nothing improved my program like the m17. If you plan to cross from a hobby to the sport it is a requirement. Even with a drk. The sanwa radio protocol is second to none. Smooth pwm transmission is vital for optimal performance. The ability to make small changes that show instant results is just needed at the sport level.

@kevinslawinski4917 2 года назад

@@Dorkyand40 ok, thank you. I currently don't have the extra funds for the m17 but hopefully soon.

@Dorkyand40 2 года назад

I get it. It’s a big investment. It will make you faster. Think about it before the next motor or that couple hundred on a different radio. It’s worth the hold out.

@natyvia 2 года назад

Can you tell me what's the difference between the Gold and Red edition of the m17 radio

@Dorkyand40 2 года назад

never knew there was different ones?? ill need to take a look

@tarrollkilgore5043 2 года назад

What does the sub-t on base menu for throttle do?

@Dorkyand40 2 года назад

Just like sub trim for steering. If you’re not centered or bottom correctly then you can use trim vs calibrate

@alonzoduncan8077 2 года назад

Hey Bro what remote do you like best for np 7pxr or sanwa m17?

@Dorkyand40 2 года назад

gotta say m17. the futaba felt better in my hand but the m17 ability to change things is unmatched no matter what anyone says. honestly the steering changes have helped me the most. the throttle and rmode is just necasary

@mally_mal820 2 года назад

can I use all these tips for my 1/7th scale drag limitless?

@Dorkyand40 2 года назад

Sure can. For drag. Think for speed runs they like to tune more in the esc

@mally_mal820 2 года назад

@@Dorkyand40 ok. im stuck between the 7pxr and the m17 for my limitless drag car. im leaning more towards the m17 plus it a little cheaper..

@Dorkyand40 2 года назад

@@mally_mal820 it’s a tough call. I liked the feel of the futaba slightly better but the m17 is just so easy and versatile and now everyone is using them for drag so it’s going to be even easier to use and the big hitters are working with sanwa for some custom firmware.

@mally_mal820 2 года назад

@@Dorkyand40 nice. I think im gonna pull the trigger on the m17. thanks!💪💯

@tomcat3036 2 года назад

Hello sir I am interested in getting involved with No prep Racing and I would like to know where you are located at I see in your one video you were wearing a Cubs hat just wondering where most of your races are held thank you

@Dorkyand40 2 года назад

I’m in Ohio. My entire 2 year journey is all here On the channel. Let me know if you need anything