Fully Automatic Compostable Sugarcane Bagasse Pulp Molding Food Containers Packaging Making Machine 

ZBC1110 Fully Automatic Compostable Sugarcane Bagasse Pulp Molding Food Containers Packaging Making Machine
The machine can be used to produce various compostable tableware, food container,container lid, premium food packages of draft angle of 3 degree ,like chocolate tray,biscuit tray,etc.,The main character of this pulp molded food containers machine is the moving accuracy ,which is especially important to the product with complex structure.
Commonly Used Raw Material:
The commercial primary pulp board for producing disposable tableware is usually chemical pulp or chlorine-free ECF pulp ,can be purchased from paper making manufacture. One-year plant fiber is the proven more proper raw material for pulp molded tableware production for the fiber length is shorter,like sugarcane bagasse fiber,bamboo fiber,wheat straw fiber,reed straw fiber or some offcut of office paper.Wood fiber or bamboo fiber would be added by certain ratio for producing some products of complex structure or deeper products.
Can Produce:
Paper Plate/Compostable Food Tray /Disposable Tableware /Paper Plates And Bowls/Fast Food Take-away Box and Lid/Ready Meal Packaging Trays/Supermarket Fresh Trays/Branded Food Packaging/Cup and Lid/Cup Holder and Carriers/
Why Choose us:
1:Special structure,Higher Output
Eg. 600ml bowl in 50mm height , daily output be 1.5Tons per single machine.
2: Higher Pressure for Higher Product Quality
The machine with servo+rod structure driving on heating stage allows unlimited pressure and adjustable boosting speed, which gives better performance for the products’ density and stiffness.
3: Modular Design for faster installation
Modular design of the machine for easy transportation, and much faster installation and management.
4: Wide applicable range
This machine can be used to produce various compostable tableware,from the simple-structure plate, to the deep glass, and complex premium food packages of small R angle ,like chocolate tray,biscuit tray,spoon,fork,knife,etc.
5: 60kN Pre-pressing force helps heating energy saving
With 60 kN cold-pressing process, the moisture of the wet product is deduced to be up to 60%,which contributes to less heating energy needed, less heating time,less production cost, 30% less than the conventional machines, to heat by electricity for one ton of product consumes about 1800kwH of electricity.
6: Mechanical Structure for dozen years’ running
Considering pulp molding production line is the future oriented project, we apply firm mechanical structure and machine material,and the servo+rod guide driving structure, which is free of frequent maitenance,of less maitenance cost,machine quality is greatly guranteed for stable and continuous production. Our warranty terms is 5 years ,the heating rod is of 2 years.