Fully Homemade JETSKI build - part 1 

Plans: homemade-madness.com/shop

aliphatic glue would be better glue for the paper to wood, for a 22yo your doing some clever things unlike others on youtube, your building to a set of plans, I'm impressed by your engineering, keep it up Jornt you'll go far lad😎👌

Boat building tip: to avoid deformation, build up a hull piece by piece symetrically - not one half first, then the other half. It prevents potential warping to one side, and will also make things more even if you want to do seam corrections simply because they are fresh in your memory as you go.

A "easy" task done by him again. You have a high level of skill, keep going king!

Good job as always. I love how you did all this and never even had to pull out a ruler 🔥

The worst part about finding this video is that when I saw part 1 I got excited then saw it was posted on May 15. Well, I'm bummed I can't binge-watch this but I'll def be here for the rest of the project!! Good luck!

This is going to be an amazing series! Can't wait for more

Found your channel through this video. Just brilliant. Really looking forward to more on this Jetski!

I'm impressed with your skills and knowledge young man. You certainly will go far.

Very nice designs, and I'm glad your using your PPE.

Sweet build so far! Looking forward to part 2!

This is great! So nice of your sister to help you carry it out! 😉 Love from Australia

Looks awesome, keep up the good work!

Amazing engineering and encouraging build of a superb project! Well done!

Looking forward to part 2 😊👍

Just found your channel and just found my next project. Awesome work, now heading off to watch your back catalogue. Patiently waiting (not) for the next instalment. Stay true.

Great video and great designing, way better than I could ever attempt. I am currently building a stitch and glue sailing dinghy and I have a few suggestions: I am not sold on the PU glue that you used. Epoxy resin with wood flour or an additive like cel-o-fil that is designed for structural bonding and filleting would be a better choice. Also, try your hand at designing a stitch and glue hull. Instead of a frame with planks attached, bulkheads are used to add rigidity and water tight compartments for floatation. I think you could do it and would simplify the build process for any future designs.

Wat een vet project man, en respect dat je al het werk allemaal zelf blijft doen! Lang niet iedereen heeft de luxe om een CNC te gebruiken, maar een decoupeerzaag hebben de meesten wel. Top werk, ik kijk uit naar het volgende deel!

Really cool it will be super strong with all those frames !

Very cool work. I love what you are creating

Wow, this is really a wonderful video content Sir , since I was a kid I was obsessed with boats until now I'm still into dreaming of building one but I can't afford to do it since I don't have much , and then there comes your step by step video of how to create it , and then it gives me an inspiration to maybe try to build it bit by bit , and follow your drawings, instructions,dimensions and as well as your dedication to get it done . I just hope I can have your full or complete boat plan on my working table for in one way or another it could me help build my dreams. God bless you Sir, stay safe and healthy to keep you doing what you do, and inspiring us . It is an honor for me if one of these days you can share me your ideas on my first project. Thanks.

You did a really great job. I wish you a lot of fun with your boat.

I’m going to build this next month! This looks awesome!

Great job on those plains, if some one told be they are going to do what you are doing I would think "never going to happen" but I some how think that you can indeed do it...

Im suprised by the power of the drill!! Cant wait to see some real power in it!

I've been toying around with the idea of building a dirtbike/jetski hybrid for a while. This homemade jetski gets me excited

Hell yeah that’s some awesome engineering and skill you have! Keen to see it go much faster.

One day I'll be this cool, mark my words! Killer shop, man. Way to go the distance.

That probably took forever to dry depending on the temp of where your at. Glad to see you are still leading the game on project/builds of DO-ABLE fun projects. Your videos are prime for helping people that want to make something. Keep at it

Fabulous. Can’t wait to see how you make the jet engine

Please make these plans free of charge. I love this jet ski. Can't wait for part 2.

Lookin awesome 👍🏻 great work as always

Looks awesome bro! Some time ago I was searching on RU-vid for home made jetskis and I couldn't find any decent one.

Thank you for the Work you do. I will enjoy building this one. I expect it to produce many fun hours.

Ziet er netjes uit kan niet wachten voor deel 2. Ik vind die trap tractor al geweldig met die motor er in ben benieuwd als je de jetski klaar hebt wat voor moois je dan gaat maken. Ik zou zeggen blijf heel veel leuke en creatieve filmpjes maken 👍🏼😎

That's a sweet little boat, nice work! That hull should be almost indestructible, given the thick plywood you used. Should be just about right for a jet-ski! 👍

Well done, my friend…. well done. Thanks for sharing!!

Buddy ,you are a genius...good job!

Esperando el próximo video, excelente trabajo 👏👏👏

Excellent work!

Thanks for sharing these idea!!

You are a genius Man, very good!!

Mooi gemaakt en interessant om dit te zien.👍🏼😃

Very interesting project, I will be following this build for sure 👍

Thanks for sharing this video of making this amazing boat hope I can built like this

This is going to be fun to follow!

Great job as always you have so much talent!

That thing is like the spruce goose ! Its gorgeous

Je hebt mij weer overdonderd, man wat ben je goed en veelzijdig, kan niet wachten op deel 2

Unbelievable dude. For young generation like u. I'm going to be your subscriber and can't wait part-2.

Felicidades 👏 excelente trabajo y muy prolijo y detallado paso a paso 👍 Maestro

Congratulations. Brutal job 👌🏿

that looks like a solid little hull.

im excited for this build

how to build a boat : firstly 1 design a jetski , 2 use the plans and configure to your personal choice ,3 build the jetski half way , 4 put an old boat engine to your half jetski . and finally 5 ENJOY your new boat :> man it has never been easier to get your own boat. 10/10 recommend this video

I'm enjoying your amazing show full of talent!

Impressive work!

The wooden hull form could also be used as a fiberglass mold form for composite construction

Very nice. Looks like a great place to live too.

Good job, thanks for sharing

Cool project 😁 👏

Congratulations bro. Bunch of respect from one DYIer to another. 🇺🇲

Ziet er gaaf uit had toevallig vandaag op vakantie het idee om er zelf eentje te bouwen en nu zie ik deze video van net 3 dagen oud Perfect !

This channel is awesome I can’t believe it hasn’t caught like wild fire with the subs yet

Great work!

Beautiful work 👏 👌

you are great craftsman !

Mate.. you want to build one with an alloy Hull for taking up rivers. Game changer.

I mean, why not 😂. I thinks it’s real cool you put the plans on your website for this jet ski. If you where here in the states I almost guarantee you wouldn’t of had an issue finding a used jet ski engine. Especially near where I live. There is always someone trying to get rid of a used jet ski. Also that is real cool how you made templates to stick right to the wood, great job bud!

Amazing work!

This looks so fun!

This man deserves a subscribe and like. Watching from the Philippines.

Super mooi gedaan man echt vak werk ik ben ook echt benieuwt naar deel 2

waiting the next part brother and its amazing work👍👍👍

awesomeee proyecto already waiting for the next one ! cheers from Chile

Love the project

Erg gaaf! En knap werk! Ik kijk uit naar deel 2

When I was 22 i couldn't find my ass with a map. Good on you homemade madness guy your stuff is amazing!

Fantastic and wonderful and amazing and superb and great design

Absolutely awesome. Don't forget to use a respirator if you do a lot of this stuff.

The foam is brilliant I didn’t know that could be done

This is awesome dude!

You're Magical Young Man. Materializing things of your ideas right from combination of your Brain views, intelligence and mindset is very rare amongst common men. You're worth millions and millions. Without any doubt Someday you're going to be a CEO of your own foundation company industry. You're going to be designing building and materializing many more bigger and biggest usable things for people of world over. 👌👍✌️❤️🌹🤗 I'm learning more from your videos about your own homemade automotive utility things. Your video presentation of exiquting your automotive ideas into reality is excellent. Added along with your super best workmanship. ❤👌👍✌️😊

a few issues. 1 you should apply the resin before laying down a fibreglass layer. helps stick and prevents bubbles and warping. 2 You wore a respirator when applying the fibreglass but not even a mask when sanding it. That's how you die. Sanding Fibreglass is the most dangerous part

Dang, thats a nice boat!

Trabalho maravilhoso! Like e inscrito!!

hi im from phillipines,i truelly admire your method of work,keep it up..

Pretty cool project 😁

Awesome 👌 thanks for sharing 👍 👍👏👏✌❤🍀

Amazing project! Greetings from Iraq!

Ur a freaking genius madness!

You are an absolute genius young man absolute genius

LEEEEEEETTTSS GOOOOO!! that was awesome man love the content!!

Amazing projet! Greetings from Brazil

Cool project 😎

Really cool!

you are a good designer

When I was a kid in the early 80s my neighbor made some kayaks using the same skeleton frame design and then covered them with a canvas and waterproof paint.

Dude. U just keep surprising the hell outta me . Keep it up

10 stars for this project 😎👌👌👌