No video :(

Furitek Python vs Spektrum Firma Micro? No contest!

Подписаться 29 тыс.

Просмотров 9 тыс.

50% 1

Checking out the new Furitek Python esc for the 1/24s. How does the Spektrum Firma Micro compare? Idk? But let’s compare what we can!
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I get nothing from the sales of this Furitek Python. I just want you guys to know the options that are out there.
Furitek Python Standard available here
furitek.com/pr...
Furitek Python Pro found here
furitek.com/pr...
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fo...
AX24 Shock mod video found here
• Axial AX24 Best Cheap/...
AX24 available here
bit.ly/3XF4q0l
RampCrab Servo upgrade kit found here
www.amazon.com...
Springs for shock mod found here
US $1.83 46％ Off | 20PCS 0.2*2 2.5 3*5-50mm Spring Steel Small Compression Release Mechanical Return Spring Pressure Spring OD 2mm 2.5mm 3mm
a.aliexpress.c...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref...
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/pr...
Furitek stinger combo for TRX4M here
furitek.com/pr...
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@shockman8014 Год назад

It would have been great if this Spektrum had been worthy to start a competition. It usually means lower prices and faster innovation on both ends.

@adamfoshaug3019 Год назад

Tony Furitek has amazing customer service he stands by his product. Absolutely love furitek. Bought 2 after watching your videos.

@KBRC81 Год назад

Tony just warranted a Lizard ESC for me. New one on the way almost immediately

@DoubleADay Год назад

Someone had to say it, the elephant was in the room. Now that the cat is out of the bag, we truly have something unique with the python, hopefully. Thanks again Matt for everything you do for us

@jesseknoblaugh2630 Год назад

You have a great freaking channel and you tell the truth and correct any mistakes you may have which is hardly any but great job Matt. A lot of people love seeing your videos including me. Please never stop making this awesome ass videos. ✊

@2fmrc Год назад

Really appreciate that! It gets hard sometimes honestly. These type comments and messages are what keep me going strong!

@HobbyistDad Год назад

Keep on keepin on! Really dig the ax24 content

@rykerthestryker777 Год назад

Horizon puppets will hate this video but they know it’s true

@OGMikey. Год назад

I couldn't agree more. These other creators say "buy it. Pre order it." It shows in their own videos it's trash. Thank you for be being an honest creator.

@salvatorehayes2753 5 месяцев назад

I'm So Excited. Ive Been Running A Injora MB100 Brushed ESC For Some Time Now On My Defender TRX4M With A Mofo Torque Beast X. I Tested A Latrax 370R Motor And That Was Insane. Then My Buddy With A Ford HiTrail Got A Cedar Motor On A Furitek. For Such A Small Motor That Thing Rips All Over My Modified Torque Beast X!!!! It's Not As Fast As My 370 Set Up But I'm Just Imaging Like A 2430 Brushless Set Up On Mine Now. Then I Saw The Adjustability In The App And I Just About Lost My Mind. And Then The Slow Crawl He Had Was Nuts And That's That He's Running Over Drive Trans And Under Drive Diffs. I'm Just Too Excited To Go Furitek As Well

@DasE30Cuz Год назад

I really want to see the Komodo and Mini Komodo run on 4S since they are rated for it. I know Nick at MoFo admitted once that his Nano Beast 2.0 (2700kv) motor is technically rated for 4S as well, but he has never actually tested it so I'm curious about that one too.

@allisuebaheza2838 Год назад

I’m working on going brushless all I need is a stock scx24 transmitter for v2 but I really like your videos they have helped me along the way so thanks for that appreciated cause I love these little trucks can’t wait to get mine finished

@wingnutbert9685 Год назад

I think a good sticker / t-shirt logo for you would be something like: 2FMRC- The 1/24th Crawling Bull Fighter!

@Retro_RC 2 месяца назад

Love this video. Just bought a C10 with a spektrum and first thing I’m doing is the cedar inrunner with the python esc

@2fmrc 2 месяца назад

Haha! Nice. Don’t blame ya

@keldonator Год назад

When I was researching what motor esc to use and I saw the performance and then the reviewer saying that the firma is good... I couldn't help but think they are clearly being paid to give positive reviews even if it was obviously not good. I'm glad you're honest, you put out very helpful content.

@2fmrc Год назад

Really appreciate that! That’s the reason they never offered to send me one but I’d rather keep it real lol

@texomarc Год назад

1s!? Hell yeah!

@2fmrc Год назад

Love it man!

@texomarc Год назад

I think you’re right. I think your course is looking great. First time I actually watched, in awhile. I usually just listen as I work.

@2fmrc Год назад

Using a bit of your method while building it. Working on a vid about it. You know I’ll be throwing some cred your way lol

@cy-one 10 месяцев назад

Got my first 1/24 yesterday (SCX24 Bronco in blue

@andrewrichey7374 Год назад

Yes it is I’ve been watching it, crawling pretty awesome

@johnlujan8706 Год назад

Thanks for the honest information.

@BigBeck82 Год назад

Be real soon, and ill be right beside you my friend

@chriswalter3155 Год назад

This looks awesome

@richardparkiii8355 Год назад

Love that you are keeping it real! I would not want that Spectrum junk! Saw a couple videos and it does look terrible. Maybe not as junk as stock, but still junk.

@animalpix13 Год назад

YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! TRUTH MODFATHER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

@JUSTHAVEFUNRC Год назад

The reason axial won’t send you anything is because you tell the truth. The scx24 is solid but axial/horizon are just riding it out like a tt02. I used to think furitek electronics are expensive but All the spektrum system does is show how good of a value the furitek parts are. Gonna be ordering a python soon. Edit: tell the truth is kinda a hard black and white. I should say You tell it how it is. No BS, no fluff.

@2fmrc Год назад

Yeah and normally I don’t let it bother me but these companies are holding out more and more on me and it gets aggravating. I won’t change though so I’ll just be delayed on my reviews until they actually ship!

@SivartCustomRCs Год назад

Amazing how much Horizon is asking for an rtr brushless ESC...if the SCX24 or AX24 came with the "new" ESC, I would be changing it out at the same time I swap out the servo.

@charlieturner3099 Год назад

Looking forward to the UTB18 review. The LPro BEC rating does NOT deliver under load for serious crawling. I’m adding a Castle BEC to get things right, but I do love the mini platform and would like to see something functional in the mix!

@rockwolfdesigns6384 Год назад

HahahahahahahahaahahahahahaahhahHHahaAaa. HELL YEAH!!!!Give it to us straight Matt. That's why we love you brother.

@iAnxxiietty Год назад

awesome vid , much love matt!

@gibsonlife573 Год назад

I know they're trying to be Innovative but furitek has got a got a lockdown on that

@edgarv.7482 Год назад

Love the honesty! Where can I find the Python?

@2fmrc Год назад

Atm just on Furiteks site. Should be available other places eventually. furitek.com/products/furitek-python-40a-70a-brushed-brushless-esc-for-1-18-1-24-rc-crawlers

@RadRaf Год назад

I was initially excited to hear the news of a new 1/24 ecu option and from such a big name but when I heard the details I felt underwhelmed. Then I started watching the youtube reviews and everyone ignoring the blatant downfalls of the system. 1S-2S capable only? no tuning options? cmon! That's a hard stop for me already! How could they honestly look at the competition and say. . ...nah, our name enough will carry us! I just don't get it sir!

@mikemangiameli561 Год назад

Wife almost peed her self from laughing when she saw you in your glasses 😂😂

@2fmrc Год назад

Haha! She should see the entire costume I had with those. It was nice 😆

@mikemangiameli561 Год назад

Lol she said all ya needed was a pocket protector and you could have been an extra in the revenge of the nerds

@2fmrc Год назад

@@mikemangiameli561 😆 love it!

@mikemangiameli561 Год назад

@2FM RC the rock van is awesome added a 1ounce weight to the front of the servo and that's all I'm going to do to it. Hope the k5 blazer is as good. I know it will be cause I trust you

@krowe33 8 дней назад

This reminds me of the Top Gear episode where they tested 3 luxury cars, but Bentley refused to give them a Mulsanne to test. So Jeremy Clarkson subbed a Yugo in place of the Mulsanne. He spent the whole episode complaining about how terrible the Bentley Mulsanne is, even though it was actually a Yugo 😂 But back on topic... Horizon is now giving their SCX24 combo away for free with SCX24 purchsses 🤣

@2fmrc 8 дней назад

lol yeah cause it’s terrible! They realized it wasn’t going to sell. So they need it out of their way 😆

@krowe33 8 дней назад

@@2fmrc lol, yeah. I have seen nothing but bad reviews about it. I don't remember any other RC electronics that hit the market and fizzled out so quickly.

@4reelfishing635 Год назад

I really wanted to see one on 4s with a nano bam or something

@andrewrichey7374 Год назад

Yeah I appreciate you also Matt Yep I’m watching

@TheShopMiniRC Год назад

But what if I need that box to add to my crawler course?

@2fmrc Год назад

Hey for $89.99 plus shipping I’ll send it your way!

@jeffnewhart491 Год назад

I might have to swap out my lizard pro and my castle bec! Was browning out with 2 hv servos and the internal bec.

@HaasesHighlife Год назад

Heckkkk yaaaaa woahhh was legit hoping they'd come out with something like this sick can anyone say 4s Baby Capra cuz I can 😂 dlux fab axels and 4s is the next move woot woot!! I appreciate you boss man thanks for the constant updates and your time !

@AgeOrmstad Год назад

Nice 💪

@rcjoe406 Год назад

To funny bother. . hey do you still think the the cayman is still a good deal was thinking maybe the rtr ..i wanna do another build but at 500 a pop the furitek is a tempting option for another rig

@2fmrc Год назад

There’s a lot of value in the cayman setups. Is it my favorite chassis? No, but it’s still good and definitely the best place to start vs a stock truck. The shocks on it are the main thing I would consider upgrading first as they have a tendency to stick bad. Besides that you could run it for a good while just as it comes imo.

@rcjoe406 Год назад

@@2fmrc cool after seeing your cheat code with the fcx24 axles I think that's my ticket now lol

@2fmrc Год назад

@@rcjoe406 it is a beast! Just make sure you have a good brushless motor to run it. Those axles and scx24 transmission require a good motor. Brushed don’t hardly cut it with that setup.

@donaldsneffe Год назад

Are you sure the AX24 electronics can work with 8.4 V BEC? (And SCX24 v1?). Did you test it? Confirmation would be cool (I am afraid of breaking more RC units in micros because of testing this ;-) ).

@2fmrc Год назад

I’ve ran the stock servos at 7.4 in this a bit just to see if it would work. Haven’t did 8.4 just because I never really had a system that would run it installed with the stock stuff. I’m usually ripping all that out lol. I can install my lizard ultimate in it and try them on 8.4 sometime. This standard Python was limited at 7.4 so that’s all I tried. I would say either way the stock servos probably won’t last long at 7.4 or 8.4 lol

@donaldsneffe Год назад

@@2fmrc You misunderstood my question. The question is not, if the servo does work with 8.4 V, the question is, if the receiver unit does. Because if this would be the case, you finally wouldn't have to run any BEC anyway, you could run directly from a 2s Lipo (but not 3s then). I made such a build with a Flysky micro receiver, which does work with up to 9 V. In this case, a BEC is not necessary (if you run only 2s, not 3s), and you can run your HV servo. But I doubt (but am not sure) that the receiver does run on 8.4 V, maybe it will break. If not, this would be super nice, but I will not test. Here is such a truck without any BEC, direct 2s Lipo driven (servo and receiver): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_miYZIv0fKQ.html But if you wanna run 3s, then you could use an ESC (Furitek) with HV BEC (8.4 V) and simply plug it into the CH2 out of SCX24 v1 elo or AX24 Elo. Then your servo will run on 2s (as does the receiver unit) and the motor on 3s. This is an interesting question IMO - will the receivers work on 8.4 V?

@wingnutbert9685 Год назад

@@2fmrc Good to see Donald here! This is just a bump in case you hadn't seen his follow-up question. :D

@zachd3146 Год назад

Where's the brushless motor for it? Show me some wheel speed!

@2fmrc Год назад

Lol too easy! I got the rop motor in one of my 1st ax24s. It rips!

@jayd4144 Год назад

I’m new to the RC hobby, I picked up a Trx4m and now have changed almost everything on it. My question is in your opinion, would the furitek Python be good to run with the purple injora motor ? I really don’t like the stock esc and controller, thinking of switching over to maybe the Flysky either gt5 or the nb4

@2fmrc Год назад

Yeah the Python or lizard pro would definitely work well with pretty much any motor. You will have to change the motor connector if your using the Injora purple motor that plugs directly into the Trx4m. I’d definitely go with the gt5 imo. The noble is great but not worth the price for the micros imo. The flysky is much cheaper and has better micro receivers. I rarely use my nb4 anymore. Since getting the Radiolink I use it and my gt5. Hope that helps!

@edgarv.7482 Год назад

Just picked up a furitek cayman PRO. What receiver would you recommend? Also what battery can I run? I thought I picked up the rtr but just got the PRO and would appreciate the help. Thank you

@bacongl Год назад

Dang I had high hopes for that spektrum system. Oh well. No reason to waste money on it then. Furitek stuff is quite pricey but if it is worth buying, then i don't mind paying more for quality.

@SCX24RANGE Год назад

Awesome review. I agree

@gibsonlife573 Год назад

I mean what you can buy the purple Pro motor for like 14 $15 and have an amazing rig

@studio4fifteen Год назад

Any idea when they migjt start shipping these? I pre ordered the day you posted this video. Then i ordered a cayman kit. The kit came in so all im waiting on is the ESC. I want to play with it so bad😂

@natedawg5150 Год назад

Just subscribed to your channel man I love your content awesome keep up the good work😎👍👏👊

@2fmrc Год назад

Really appreciate the sub & comment! Let me know if you have something you’d like to see!

@salvatorehayes2753 5 месяцев назад

Have You Actually Tested The Drag Brake On Brushed Motors? I Have A Python Pro On A Brushed 180 In My TRX4M And The Drag Brake Does Not Function At All. I've Reached Out To Furitek For Help And Waiting For A Response. I Have A Feeling The Drag Brake Only Works On Brushless Motors.

@Scottstunts Год назад

My Capra 18 has brown out issues with a reefs raw 500 servo and Furiteks power system. Rarely happens but it has a few times.

@HobbyistDad Год назад

He made a video showing a cheap plug in work around for that issue!

@Scottstunts Год назад

@@HobbyistDad I’ll find it. 🙏

@HobbyistDad Год назад

@@Scottstunts it’s only a few vids back, can’t remember the title of the vid but the work around is a 5$ capacitor called the glitch buster. I don’t even have a Capra and I picked up a couple of them hahahah

@CrazyQuadBrothersP3 Год назад

Furitek 👍🏻

@animalpix13 Год назад

🔥

@brianl426 Год назад

Good review. Have you had the chance to check out the Dinky RC ESCs yet?

@2fmrc Год назад

Got one on the way! Haven’t checked them out yet though.

@1sickgsx Год назад

So does this mean you'll be selling some of those lizards?

@2fmrc Год назад

Lol nah I just keep them for future builds. Can’t afford to buy one every time I do a new build!

@sincitycrawler7375 Год назад

If the Spectrum was a 2-1 motor and Esc combo with a actual BEC would have been cool. Fumbled the bag

@fcukeround Год назад

Wishlist......hobbywing micro fusion 2800 😊

@2fmrc Год назад

Same! The fusion is insane on a 1/10. Hard to beat that all in one AND it’s crazy smooth. They really have it figured out with that setup.

@lorenduffrin5162 Год назад

It is what it is .furitek for the win

@liammcgeath6665 Год назад

super cool whats the difference between the python and the lizard ultimate they look very similar, ive been running my lizard ultimate for a month or 2 now in my trx4m and I really like it

@2fmrc Год назад

Main difference is the ultimate has a 3A built in bec and the Python has a 5A. Not a ton of difference between the standard Python and ultimate besides that.

@sambushee9296 Год назад

Amen brother, love these other creator's bsn everybody. That spectrum is junk. No low end, isn't that the entire point?

@daveanderson8404 Год назад

awsome vid as per usual. luv ur content and hope to see a good side by side comparison soon. really hoping theres fair competition for the furitek soon....i luv thier stuff but its wayyyyy to over priced and thier support of firmware is the shittiest i have seen in a elc device......

@gibsonlife573 Год назад

Definitely not cheap man but like if you think about it for what you get and what you can do and how bad you can feed it up and pretty damn good for the money you pay I get pissed off at them too especially when their stuff don't work right or the update don't do what it's supposed to but

@A-a-ron01220 Год назад

I have to agree, i see all the other people, not gonna say who, showing this motor and they are saying they think its an upgrade and im over here cringing at the jumpiness of it. Some of the stock motors perform better and they arent even brushless! Honestly even if the motor combo was 50 dollars i still wouldnt buy it.

@Griller1977 Год назад

I'm actually curious how much just the motor is going to be once they start selling it separately from the ESC. I'd spend $25 or $30 just to try it out on a Furitek ESC since it's a direct bolt on. Bet it'd be 1000% better than anything we've seen of the $90 combo yet.

@ruuster83 Год назад

LOL trashcan! He's not wrong. its sensored but still too high KV, and slow crawl is very SO-SO, not what we were hoping for. Lame they wont send you anything, i guess CC is there favorite. Oh well bro. Hope you have luck with the Slayer, be patient and gentle on the plastic, it works amazingly

@2fmrc Год назад

Haha! It’s typical big company bs. They love anyone who will sugar coat it and make them sales! But people keep clicking that stuff so I can’t blame them really. Can’t wait to change the game with a slayer!