DESIGN & MAKE in Shapr3D and Fusion 360 | CAD CAM Tutorial for CNC

Build: Simple CNC Box with Fusion 360

ПОЛ ЭТО ЛАВА В РЕАЛЬНОЙ ЖИЗНИ!**Янчик, Сабина, Амина, Джарахов, MONA, Прокофьев**

Witch changes monster hair color 👻🤣 #shorts

Left or Right? #hairstyle #easyhair #hairtutorial #heatlesscurls #noheatcurls #healtyhair #hairtok

爸爸積極的去倒垃圾，還以為能白撿100，結果這是女兒的套路呀！ #funny#搞笑#整蠱

Fusion 360 CNC 3D Carving Tutorial for Beginners 2023 || HOW TO CAM Basics

Bevelish Creations

Подписаться 87 тыс.

Просмотров 65 тыс.

50% 1

Видео Поделиться Скачать Добавить в

► Side Table Full Build | • Building a Modern Side...
Hey guys! Here is a full tutorial on how I set things up in Fusion 360 to carve this dish-shaped top for my modern side table that i built a couple of weeks ago. In this video, i will also show you how to model this in Fusion 360. So you get a lesson on both CAD and CAM basics within Fusion 360! HOpe you guys enjoy! Be sure to check out the full build video as well because I absolutely love this side table!
| FOLLOW |
► Website | www.bevelishcr...
► Instagram | / bevelish_creations
► Facebook | / bevelishcreations
-------------------------------------------------------------
TOOLS / MATERIALS
■ 1/4" Dia. Downcut Bit amzn.to/3Ugg54d
■ 1/8" Dia. Ball Nose Bit amzn.to/3DvHCrw
-------------------------------------------------------------
OTHER TOOLS (affiliate)
www.amazon.com/shop/bevelish_creations

Опубликовано:

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 164

@rolandrivard2667 Год назад

Would love seeing more Fusion 360 design tutorials. Good job!

@BevelishCreations Год назад

Thanks!

@joeking433 19 дней назад

Good job, you're one of the better youtubers for explaining cad/cam software!

@ModernRemade Год назад

I don't always daydream, but when I do, it's about getting a CNC 😄 I'll keep this video bookmarked for when that day comes. Thanks Alex!

@BevelishCreations Год назад

Thanks man! CNCs are pretty awesome!

@TeamKaosNZ 3 месяца назад

As someone who has just purchased their first desktop cnc and has no idea where to start, this was a great clear guide. I use Fusion 360 for my 3d printing and would like to use it for my projects for the cnc as well, so I will be sure to keep tuned on your videos and no doubt will be watching this one back multiple times while trying to get my head around the cnc. Cheers

@RichardRecupero 6 месяцев назад

dude this was a great video. i had to watch it 10x but it helps each time i watch. i am a rare user of these tools and i dont make much at all

@brewbuilds 5 месяцев назад

great job man, you provided a ton of detailed info, and it was easy to follow. thank you! 👊🏼

@BevelishCreations 5 месяцев назад

Thanks!

@meperson Год назад

I agree with others this is great intro video to Fusion 360 and CNC. Having full understanding of path from CAD to CAM is very helpful. I use Fusion but don't have CNC (yet 😁).

@BevelishCreations Год назад

Thanks!

@dpgoverride 7 месяцев назад

One year later your video is still providing a noob to CNC a nice guideline for Fusion 360. Thanks!

@garagemonkeysan Год назад

Great video. Clear and concise instructions for CNC beginners. Mahalo for sharing! : )

@BevelishCreations Год назад

Thanks so much for watching my man!

@genefeldman2112 Год назад

New to Fusion and CNC and have watched a lot of videos. Yours is by far the best I’ve seen. Thank you for providing such a high quality tutorial.

@BevelishCreations Год назад

Thank you so much for watching :)

@Intervaloverdose 5 месяцев назад

I'm back again for a refresher lol. Thanks heaps!

@dorochagi_k Год назад

Alex. You should do more of this. Excellent tutorial!

@BevelishCreations Год назад

Thanks! I really want to…but seems like it doesn’t get enough views 😂

@DesignCraftWorkshop Год назад

Very good explanation 👍🏻 super clear and concise

@BevelishCreations Год назад

Thanks man! Let me know if I explained anything wrong haha. You’re the pro

@Kyle-wb7wx Год назад

THANK YOU! This is one of the best tutorials on CNC for Fusion 360. Fantastic my dude!

@BevelishCreations Год назад

Thank you!

@angiesmith3386 8 месяцев назад

You are amazing. You take something that is so overwhelming and make it seem so easy. Thank you!

@BevelishCreations 8 месяцев назад

Thanks for watching! :D

@JackFehn-mi3vj 9 месяцев назад

I am new to CNC, I do know fusion which I use for my 3d printer and lightburn for my laser. I had a really hard time finding a video to show me set by step on how to use Fusion and Easel with my CNC, I even watch Lars Christenson who showed me how to use Fusion in two weeks for the 3D printer. Then I happen to find this video, you were able to show just what I was looking for in very simple terms for me to understand. THANK YOU!!! I am looking forward to discovering more of your Videos in the future.

@BevelishCreations 9 месяцев назад

I’m so happy this video helped you!

@mackcurtis8319 4 месяца назад

This was great! Really learned a lot. You made it so simple.

@inventordojo 5 месяцев назад

Alex, fantastic video. Loved the way you explained everything. Thank you.

@BevelishCreations 5 месяцев назад

I’m glad it was helpful :)

@dylanhuntington8187 7 месяцев назад

differnly liked this thank yiou ive usied fusion 360 for 3d printing but using 3d printing to make a cnc to make more awesome things but still learning how to make things always

@cyberlizardcouk Год назад

really useful. super simple for the beginner like me.

@BevelishCreations Год назад

Glad you liked it :)

@wt29 2 месяца назад

Great video but I find using the Easel/GRBL post processor and then GSender as a better combination. The interface in GSender is just slicker with better probing, no easel driver required, inbuilt surfacing and diagnostics. It's free but I'd pay for it if they asked.

@lvance3236 Год назад

This was very helpful. Thanks!!!

@BevelishCreations Год назад

Thanks for checking it out!

@Carpenters_Canvas Год назад

THAT WAS AWESOME!! thank you so much, straight forward and everything, I'm new to all of this accept woodworking, I'm a carpenter, about to buy the onefinity or the xcarve, this week so this was a great little look into it, very well said and easy to follow!

@BevelishCreations Год назад

Thank you so much for checking out the video! I love my onefinity!

@Samson484 Год назад

Great video. Learned a lot.

@BevelishCreations Год назад

Thanks!

@jeffrymoron6063 Год назад

Thank you so much for this tutorial, Alex, I’m a new follower! I work for a concrete company and I operate a FrogMill360 machine, but I wanna learn how to make programs! 😁 thanks again.

@BevelishCreations Год назад

Hope it was helpful

@norincurcan8827 Год назад

Hi, I could have sworn you were using Shaper 3D in the past, in fact your older videos pushed me into using Shaper for my cabinetry side hussle 😊

@BevelishCreations Год назад

Nice! And yes I do use Shapr3D :D

@JulianMadeja 9 месяцев назад

Awesome tutorial! Thank´s so much for sharing. There is just one thing, which does not work for me: The second step in the setup mode which generates the parallel shapes does not work for me. As Fusion only generates parts of the shapes and not the whole path as in your video shown the cnc does not remove all the rest of adaptive clearing. Is there any setting which I have to made in any step earlier to get fusion to drive all the paths as in adaptive clearing?

@nabilmazeghrane8179 Год назад

Amazing !! thanks a lot , it's really helpful tuto

@BevelishCreations Год назад

Thanks for watching!

@HermanRooseboom 4 месяца назад

Great video but I keep getting the same issue - once I do the final step to create the toolpath, the bit shows on the Z axis and the toolpath shows that it will only cut from the side as opposed to the top. I suspect that somewhere I have an incorrect setting but cannot find it. Any suggestions?

@yasinkolgu 5 месяцев назад

Hi! Thank you.

@J87513 Год назад

Right at 1:55 you should say that you are extruding in the “cut” action to help the new people to fusion 360

@jimrainey1518 Год назад

Thanks this has been a big help. Would U be able to do something to explain how to uae fusion with a Snapmaker CNC ?

@BevelishCreations Год назад

The process is the same for all CNCs. Unfortunately I don’t have a Snapmaker CNC

@fayjason 9 месяцев назад

Can you do a video that explains when you would use the different XYZ plains? I guess, another question I have is, would you use any other plains besides XY when draining up a sketch for a CMC project?

@BevelishCreations 9 месяцев назад

I usually only use the XY plane when doing CNC projects. It makes sense to me since the XY plane would be the bed of my CNC. I’d use the other planes for modeling only

@fayjason 9 месяцев назад

@@BevelishCreations thank you for answering my question. I’m just getting into this now. Super excited

@Scotty476 Год назад

Great video. I would love to see a v carve or and inlay video in fusion. Thanks!

@BevelishCreations Год назад

Ohhh I actually have an idea for an inlay video, but might be a little different from what you expect. I’m going to try it and see if my plan works haha. If it does, I will put one out before end of the year

@SibeJanKramer Год назад

Once more: great for sharing! Tried something similar, but only for computing the toolpaths it took hours. Milling it would take perhaps days... How much time did this operation took Fusion and how much time did your CNC need?

@BevelishCreations Год назад

It took about 2 hours total to cut the whole thing

@brightonideas Год назад

Excellent overview - doubles as a "how to make instructive videos" video...

@BevelishCreations Год назад

Thank you! Glad you found it helpful :)

@davidkleinman4920 Год назад

Just out of curiosity would there have been any downsides with combining steps 1 and 3 so you would only have one tool change?

@BevelishCreations Год назад

Yeah if we cut the piece out, there’s no good way of holding it down for the parallel pass. We could use more double sided tape, but the parallel pass takes a long time and we never know what could happen in that time.

@ebnmbm3692 Год назад

HI! Which CNC machine are you using? Would you recommend it? Or perhaps some other CNC machine? Thanks!

@BevelishCreations Год назад

Hey I used the Inventables X-carve in the video. It’s a great machine for beginners. But I’ve since upgraded to a Onefinity, which has much stiffer rails, so I get much better results

@SabinusOdimgbe 10 месяцев назад

Please can you send me some software link to download Ezo and many more softwares. Your tutorial was impactful

@BevelishCreations 10 месяцев назад

What’s EZO? I just download from the softwares’ websites..

@SibeJanKramer Год назад

Thanks a bunch for this vid! Just one question: why setting 'Rest Machining' with the first toolpath, isn't this only necesary with the 2nd toolpath?

@BevelishCreations Год назад

I think you’re right. It’s only necessary for the second toolpath. I’ve just always had in my mind that the first one requires it to tell the second toolpath “this is where it starts”. So I haven’t ever tried skipping it for the first toolpath

@jetstream01 8 месяцев назад

Great tutorial thank you so much. Quick question: did you say you have to have the paid version of Fusion360 to do ATC in one file? Looking at the Carvera so I am wondering if I have to pay for Fusion360 to use the ATC feature or if maybe I can use their post processor to enable ATC on the controller side.

@BevelishCreations 8 месяцев назад

Sorry what’s ATC? I’m using the free version of Fusion 360

@jetstream01 8 месяцев назад

@@BevelishCreations auto tool change

@BevelishCreations 8 месяцев назад

Oh yes that’s only available on the paid version

@jetstream01 8 месяцев назад

@@BevelishCreations ah ok got it thanks. I wonder if a post processor can just be used to automate tool changes.

@BevelishCreations 8 месяцев назад

I’m not sure what you have in mind but Fusion won’t let you post process with multiple tools. You have to do the separately

@ryanclarke2161 11 месяцев назад

excellent video, only thing is please dont pan away from the screen so much, some of us with less brain cells need longer to see whats going on and do it in fusion. easy to follow and straight to the point though.

@jmapp7869 Год назад

My xcarve came with a 1/8 collet, did you just upgrade to a 1/4 collet or did it come with it?

@BevelishCreations Год назад

No, I had to get the Dewalt router with the x carve, and the router had a 1/4” collet. Not sure about the newer X carves

@jmapp7869 Год назад

@@BevelishCreations the newer one came with a Mikita 1/8 router. Also do you have to manually adjust your spindle speed or did the machine automatically do it?

@BevelishCreations Год назад

Makita should have a 1/4” collet. You’ll have to adjust the speed manually. You’ll need a spindle if you want to do it automatically

@aungmyat7242 Год назад

Excellent Tutorial. But I can't 3D Adaptive Clearning. All of the steps are the same.

@BevelishCreations Год назад

Why not?

@aungmyat7242 Год назад

@@BevelishCreations 3D Adaptive Clarning in Geometry tab, Machining Boundary can't keep Selection. If Selected Machining Boundary and Stock Contours, toolpath cannot run. I kept Machining Boundary None and Stock Contours_Stock Selections not Select, the toolpath can run and it's going to cut away all of that extra stock. You also said that. Edit: Sorry for my mistake. I forgot to check Machine Cavities and Flat Area Detection in Passes Tab. Thank you very much.

@marion1684 Год назад

p̾r̾o̾m̾o̾s̾m̾ ✨

@MattMartinGuitars 4 месяца назад

I really enjoyed this but Jesus man slow down!

@ChristianBrink Год назад

This was the best Fusion to X-Carve tutorial - I've looked at others and they go a little too deep. This really focused on the stuff I need to know to start out - well done!

@BevelishCreations Год назад

Thanks man! Yeah I tried to keep it concise so anyone can get started and get something made. And if they want to learn more, they can go to the more in-depth tutorials :D

@rhettdunn8788 Год назад

Agreed. Awesome tutorial on fusion to x-carve. I can design almost anything in fusion, but I struggle with CAM. Often times I find myself taking measurements from fusion and recreating as best as I can in Easel. This video was perfect for taking that next step

@BevelishCreations Год назад

Thanks!

@BobMarley-sq4pc 2 месяца назад

This video has been incredibly helpful learning how to use my CNC machine. Thank you sir!!!

@joeking433 19 дней назад

Man, it's So much harder than 3D printing! Is the software just not as good as 3D printing or is CAM just so much more complex than 3D printing?

@miker8687 Месяц назад

This is a great video thank you. I have a question, I modified your directions to make a smaller dish. I am finding on the 2d contour tool path it is not cutting all the way through my stock. I am using double sided tape and a probe to find my zero. Any ideas what I could check or change to make sure it cuts through my stock completely?

@logipedro101 2 месяца назад

Great video. I'm using 1/8 bits with a similar process and I wonder, since I'm using bits with the same diameter, if the adaptive clearing is always necessary or if I could just jump straight to parallel?

@christerferhenderson5645 2 месяца назад

Ok i have to say wow, and thanks one of the few extremely detailed start to finish tutorials I have seen regardless of software. Very in depth as to why you were doing each step. Subscribed and will check out your other videos. Not sure if you have done one as I havn't looked yet, but would love to see a 3d version.

@apgkpsdgksd 9 месяцев назад

Hi, i don't know how configure My machine For do this stuff, i use aspire but fusión it's look so much complete, can You help i have 6090 cnc machine

@johnyan8417 5 месяцев назад

It seems F360 CAM doesn't have the ability to easily handle a compression tool path. (no way to do ramp down first then lead in to the part)

@ronin2167 6 месяцев назад

That actually took longer than I thought it would to generate. Then again I was using a generic tool just to follow along with the video.

@danbernskoetter 2 месяца назад

Outstanding explanation. Thank you.

@troyd0 9 месяцев назад

This is one of the best videos I've seen so far about the whole process of modeling all the way through G-code creation. Keep up the good work.

@BevelishCreations 9 месяцев назад

Thanks for watching :)

@jameshui7817 5 месяцев назад

Thanks a lots

@dgoddard 6 месяцев назад

I've been putting off learning this stuff, and I don't know why. Thanks for the no-nonsense approach. Within a few minutes I had a 10 in and a 6 in plate modelled up and ready to cut.

@danymato 8 месяцев назад

THANK YOU SO MUCH! Really fast, straight to the point, PERFECT!!!!!!!!!!!!!!

@toddcorey3190 7 месяцев назад

I took 3D auto 16 yrs ago and this is blowing my mind! My CNC gets delivered this fall and trying to get a head start on learning how to run it ahead of time. Great video

@ChrisSaddler-zb8oy 10 месяцев назад

Are you using Fusion 360 Essentials or a more expensive version?

@BevelishCreations 10 месяцев назад

No I’m using the free one

@JPToto Год назад

Awesome video! I have an x-carve but have been looking to make the switch to F360 so this was timely. Well done! One Q: will the carve stop between tool paths by itself to change tools? Or does Easel consider each of the frames you imported one job?

@BevelishCreations Год назад

Hey! Easel will stop after each “workpiece”. It’ll move the bit back to the home point. You’ll switch out the bit, and it will ask you if you want to use the previous zero point. You’ll want to select “use previous zero point”, and then you’ll want to re-calibrate the Z axis since every bit will be different length. And then just press Carve again

@JPToto Год назад

@@BevelishCreations Ahhhh ok that makes sense. Thanks a bunch! Great video.

@BevelishCreations Год назад

Thanks!

@MCsCreations Год назад

Pretty interesting indeed! Thanks, Alex! 😊 Stay safe there with your family! 🖖😊

@BevelishCreations Год назад

Thanks man!

@74cmj Месяц назад

Fantastic video. I've used fusion 360 for my 3d printer but didn't know where to start for my new cnc. This has totally got me going. Thank you thank you thank you

@zynlycl 8 месяцев назад

ı watch just now and ı thank you man realy thanks a lot

@BevelishCreations 8 месяцев назад

Thanks for watching :)

@Monberg75 Год назад

Great tutorial, im all new to CNC and manufactoring on Fusion, only done 3D printing. If I have a model I made, I would like to NOT fillet the edges, but instead use the CNC with another bit to make the rounded edges, just like you do with a router. But I cant seem to make it. Do you have a guide for that too?

@BevelishCreations Год назад

You can do that with a bowl bit and a 2D pocket tool path. But the radius is limited by the radius on the tool. For one-off projects like this I like to customize the fillet size, which is why I do it this way

@kimmonberg9616 Год назад

@@BevelishCreations thank you very much, I'll investigate it further. :)

@J87513 Год назад

….but anyways wow I love your video! So many tutorials about fusion 360 with CAM are so long and boring but you get straight to the point. Love it.

@seabass1015 9 месяцев назад

thankyou so much!

@BevelishCreations 9 месяцев назад

😊

@3ddiy Год назад

I always get hung up on the details of settings for step-downs and depth. This was great to see what you do. Thanks for sharing.

@BevelishCreations Год назад

Thanks man! I’m glad it was helpful!

@naz8885 Год назад

Another great video. More Fusion360 CAM videos please! :)

@BevelishCreations Год назад

Thank you!

@MegaNachodude 4 месяца назад

Great video thank you for the help!

@RattlecanGuitarRestorations Год назад

This was great. I'm transitioning from manual instrument building to CNC operations and you answered so many questions I had. THANK YOU!!! 👍

@BevelishCreations Год назад

Thank you for watching!

@andrieseerlings 4 месяца назад

great video

@dusanpavlovic2201 Год назад

so when the 1st operation is done how will i know exactly where my mill should be on all coordinates in order to continue where it should after shange and not like 1mm off to one side?

@BevelishCreations Год назад

The XY origin won’t change from operation to operation, unless you decide to reset the origin. But you’ll have to recalibrate just the Z axis after each bit change

@dusanpavlovic2201 Год назад

@@BevelishCreations ok so there is an option to move the end mill in all axis to set it where ever i want i to be and once i start xy doesn't move and once it's done with one operation it comes back to the start and lifts up so i can change the drill, how much does it lift up and how do i recalibrate it, can you make a video that adds onto this one and shows that process where you ended?

@BevelishCreations Год назад

Yeah after you’re done with one operation, the machine automatically goes back to the XY origin that you had set. And the control software will allow you to move the Z axis up or down so you can change the bit. And the control software will have an option to “calibrate XYZ” and another option to “Calibrate Z”. Just click on the second option and use your regular calibration method (by eye or using a probe). And then run the second operation. I can make another video sometime, not sure when though

@dusanpavlovic2201 Год назад

@@BevelishCreations o wow nice program

@terryhay2029 Год назад

Great video thanks mate. Your were clear, easily understood and moved through the process efficiently. A little fast in places but that's what the pause button is for as I reviewed each part of the process in more detail. One of the better video's that I have seen on the process all the way from CAD to CAM to Control. Wish you had something on a Genmitsu 4040 especially how to set up the tools!! 😵‍💫

@BevelishCreations Год назад

Thanks so much! I might make another video on tool setups in the near future. I’ve been getting a lot of requests about it

@feasterfamine836 Год назад

Awesome video, I am just getting started and this happened to be exactly what I needed for my first project. I had tried Easel and Carveco and neither had an easy way to create a custom fillet. Also their toolpaths were all kinds of unnecessary, my cut time for a better cut went from over 1.5 hours to just over 22 minutes. Thank you!

@BevelishCreations Год назад

I’m glad this was helpful!

@frankavery7791 9 месяцев назад

Excellent Video. Good pace and balance of information. Thank you!!

@BevelishCreations 9 месяцев назад

Thanks!

@russfranklin8457 Год назад

I am still waiting for my machine to arrive and wanted to view a simple "how to" video that would help me understand Fusion360. I could not be happier! This was brilliantly done, well paced, and yet I could see on the screen exactly what you were doing. Prior videos I have viewed have included horror shows of the CNC eating its rails and such so I was wondering if perhaps I had made a huge mistake. Thanks for taking the time to do this! I'm a fan and I will subscribe.

@BevelishCreations Год назад

Thank you! I’m glad this was helpful!

@martinolivare9129 Год назад

Best fusion 360 tutorial, I wish you would more of these videos. I just got a cnc and I been following along your videos to apply machining to my own designs

@BevelishCreations Год назад

Making another one right now! Should publish next week :)

@angelocigna8323 Год назад

My import was a little different since I am using a shapeoko, but this tutorial was amazing! I was able to get to my first 3d carve going. A huge thanks for posting! I have to see why my origin was moved to the center rather than bottom left, but I was easily able to change that on the machine side. Again, thanks so much!

@BevelishCreations Год назад

Glad it was helpful!

@DaveBradley Год назад

Very nice! I would love to see more Fusion 360 tutorials.

@BevelishCreations Год назад

What would you like to see

@DavidWoodwright Год назад

Thanks Alex, great video! Very good for someone who's already somewhat familiar with Fusion and with using a CNC. It's the perfect quickstart guide (I have a 3018 that I got years ago and I've been just using Inkscape and 2d carves/svg files.... been wanting get into 3d carving so this is my ticket in!)

@BevelishCreations Год назад

Awesome! Glad I could help!

@gregorykent9775 11 месяцев назад

Excellent video MORE PLEASE!!

@BevelishCreations 11 месяцев назад

Thanks!

@shinobitree5711 9 месяцев назад

I should’ve come here first. Thanks!

@BevelishCreations 9 месяцев назад

Where did you go instead of coming here? 😂

@shinobitree5711 9 месяцев назад

@@BevelishCreations don’t want to say. 🤣🤣🤣

@colinsnyder3082 Год назад

I have been begging someone to create a video of this caliber… I am new to cnc and this was extremely informative. I would love to see more!

@BevelishCreations Год назад

Thank you thank you!

@colinsnyder3082 5 месяцев назад

Hey, so I’m having a problem with my setup. When I run the program through my cnc it’s only cutting down 1/2 the depth of the model. Almost like I have a .5 where I should have a 1 on the z step down… it doesn’t appear to be a problem with the machine… could you help me figure out what is going on? I’m using fusion and a Mpcnc with marlin firmware…

@ThornCreekWoodworks Год назад

This was great, Alex! Thanks. Has me wanting to take the plunge to buy a CNC even more!

@BevelishCreations Год назад

It opened so many doors for me! If you’re in the central Ohio area, I’m selling mine! 😂

@ThornCreekWoodworks Год назад

@@BevelishCreations I'm in PA but I'll be in Ohio next week. What size X-carve do you have and how much do you want? 😁

@BevelishCreations Год назад

It’s a 1 meter x 1 meter. Send me an email on Bevelish.creations@gmail.com

Далее

DESIGN & MAKE in Shapr3D and Fusion 360 | CAD CAM Tutorial for CNC

38:22

DESIGN & MAKE in Shapr3D and Fusion 360 | CAD CAM Tutorial for CNC

Просмотров 26 тыс.

Build: Simple CNC Box with Fusion 360

12:02

Build: Simple CNC Box with Fusion 360

Просмотров 233 тыс.

ПОЛ ЭТО ЛАВА В РЕАЛЬНОЙ ЖИЗНИ!**Янчик, Сабина, Амина, Джарахов, MONA, Прокофьев**

45:25

ПОЛ ЭТО ЛАВА В РЕАЛЬНОЙ ЖИЗНИ!**Янчик, Сабина, Амина, Джарахов, MONA, Прокофьев**

Просмотров 2,8 млн

Witch changes monster hair color 👻🤣 #shorts

00:51

Witch changes monster hair color 👻🤣 #shorts

Просмотров 10 млн

Left or Right? #hairstyle #easyhair #hairtutorial #heatlesscurls #noheatcurls #healtyhair #hairtok

00:18

Left or Right? #hairstyle #easyhair #hairtutorial #heatlesscurls #noheatcurls #healtyhair #hairtok

Просмотров 10 млн

爸爸積極的去倒垃圾，還以為能白撿100，結果這是女兒的套路呀！ #funny#搞笑#整蠱

00:19

爸爸積極的去倒垃圾，還以為能白撿100，結果這是女兒的套路呀！ #funny#搞笑#整蠱

Просмотров 3,8 млн

10 tips for Fusion 360 that I wish someone told me sooner.

12:32

10 tips for Fusion 360 that I wish someone told me sooner.

Просмотров 364 тыс.

Easy 3d carving with VCarve Pro - can it really be that simple?

16:40

Easy 3d carving with VCarve Pro - can it really be that simple?

Просмотров 195 тыс.

How To Get Started With CAM Within Fusion 360 - Tutorial

29:52

How To Get Started With CAM Within Fusion 360 - Tutorial

Просмотров 382 тыс.

Fusion 360 CAM tutorial for CNC beginners | How to

12:47

Fusion 360 CAM tutorial for CNC beginners | How to

Просмотров 337 тыс.

CNC Basics - What You Need To Get Started

9:18

CNC Basics - What You Need To Get Started

Просмотров 1,1 млн

Was I unfair to FreeCAD?

17:31

Was I unfair to FreeCAD?

Просмотров 146 тыс.

( Fusion 360 ) How to Convert A Photo to a Cnc File using Fusions Canvas Tool. (Langmuir Systems)

11:51

( Fusion 360 ) How to Convert A Photo to a Cnc File using Fusions Canvas Tool. (Langmuir Systems)

Просмотров 397 тыс.

Fusion 360 CNC 3D Carving Step by Step || HOW TO

27:36

Fusion 360 CNC 3D Carving Step by Step || HOW TO

Просмотров 5 тыс.

47 Fusion 360 Tips in 15 minutes - Tips Everyone Should Know

15:10

47 Fusion 360 Tips in 15 minutes - Tips Everyone Should Know

Просмотров 11 тыс.

Watch This BEFORE Buying a CNC Machine (10 regrets to avoid)

21:21

Watch This BEFORE Buying a CNC Machine (10 regrets to avoid)

Просмотров 64 тыс.

ПОЛ ЭТО ЛАВА В РЕАЛЬНОЙ ЖИЗНИ!**Янчик, Сабина, Амина, Джарахов, MONA, Прокофьев**

45:25

ПОЛ ЭТО ЛАВА В РЕАЛЬНОЙ ЖИЗНИ!**Янчик, Сабина, Амина, Джарахов, MONA, Прокофьев**

Просмотров 2,8 млн