No video :(

G37 Brake light Halo install Step by Step DIY (GTR BRAKE LIGHTS!!!)

Подписаться 1,2 тыс.

Просмотров 67 тыс.

50% 1

In this video I will show you how to remove your brake lights from an infiniti g37 and install halos in them to look like the nissan gtr taillights
--------------------------------Wiring Configuration-------------------------------
Factory to DIODE DYNAMICS
Black to BLACK
Green with yellow strip to YELLOW
Green with white stripe to WHITE
Green to RED
--------------------------------------------------------------------------------------------------
IG: @g37supreme
Car Club: @876ix.lifestyle
----------------Affiliate links------------------
-----------Items you will need-------------
1. Rotary tool Wired: amzn.to/3pMlTFz
1a. Rotary Tool Wireless: amzn.to/3QB48V8
2. Diamond Cutting wheel: amzn.to/3CjH3SH
3. Tail as turn module: amzn.to/3AtLyZw
4. Rust-Oleum Primer: amzn.to/3bYJAHr
5. Rust-Oleum Gloss Black: amzn.to/3AwfmEY
6. JB Weld Clear Weld Quick Setting Epoxy, 2 packs: amzn.to/3AvXx8V
7. Tarnish Resistant Silver Wire: amzn.to/3SWNjFU
8. Diode Dynamics 110mm halos with red driver: amzn.to/3Qzc8WZ
9. Diode Dynamics 90mm halos with red driver: bit.ly/3vDOkZl
10. Diode Dynamics 90 and 120 red 4 pack: amzn.to/3pqPG6r

Опубликовано:

22 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 194

@taylor_galster 3 года назад

You’re awesome for this. No reason to pay someone $600+ to do this when it’s not too hard of a DIY. Thanks for the great video

@1BuildMedia 3 года назад

Glad it was helpful!

@jakemannino5344 4 года назад

You a 🐐 for making this video bruh

@deonpalmer8758 3 года назад

Real goat

@mannygee5111 3 года назад

Been trying to get these done for my 2007 Infiniti G35s sedan. Just took some spare ones to a shop down the street for me to see if they would know how to do it. They have the slightest clue. This is very much help that I will try and do on my own now and save money. #project 👏🏼

@coreymorgan7310 3 года назад

About a hundred of these views are from me but I'm almost done, and without this video I probably wouldn't have attempted it, I would have paid someone's high price. So thank you

@1BuildMedia 3 года назад

This is what its about for me. I'm glad you are attempting it

@Mrquietstom2022 3 года назад

You can charge 5-750 easily for this and be backed up for months! Great tutorial sir

@nonameisthename138 3 года назад

You ain't lyin!! 🎯💯 With him showing how to do it, those who are brave enough, can tackle it themselves..

@1BuildMedia 3 года назад

Cool, thanks

@shaunoguinn1015 2 года назад

I do it for a living and I typically stay busy doing it.

@shaunoguinn1015 2 года назад

I'm actually doing a set right now as we speak lol

@xxoncorektsxx4179 Год назад

@@shaunoguinn1015Do you have any 90mm I can Purchase of you?

@ksich8142 2 года назад

I like this a detailed simple video , shows how to do everything , very creative and dope lookin mod thats actually custom , not just a sticker or blacked out tail lights

@bobmotherfuckinsmith3089 3 года назад

When you use a rotary tool the trick is to keep the rpm up high and not let it get dragged down so hard. It's like using a chainsaw but 17 times smaller.

@pablocalvillo8921 2 года назад

Wow the best dioded dynamics halo video out of all here on RU-vid dyi with wiring details helps a lot!!!

@1BuildMedia 2 года назад

Glad it was helpful!

@MIKEMARBLES 3 года назад

Excellent I'll definitely be doing mine. Looking for the spiralling effect. Thank you you're appreciated

@MrTurbine777 3 года назад

You can avoid having to cut the housing by putting it in the oven at 350°. Just be sure to remove the ballast first to avoid damaging it. You then simply (and carefully) pry it apart. I didn't know this prior to watching your video and just now learned it since I'm thinking of doing similar. Thanks for the video!

@lulmoewiththegimpyleg6815 3 года назад

Try the oven method and post it.... cutting does seem kinda raw for me

@4DSCdude 3 года назад

i thought he was crazy cutting these up. i haven't tried it on my tail g37 lights but i've separated many lenses from headlights and tail lights by baking them

@37izzyyy 3 года назад

With Gs taillights in general you can’t bake them in the oven, there plastic welded to the lens, I retrofit and always have to cut the tails. Headlights easily go in the oven.

@1BuildMedia 3 года назад

Finally thank you.

@pablocalvillo8921 2 года назад

Who here has done the oven method instead of cutting them off ???

@e7bk 4 года назад

Best informative video on RU-vid

@1BuildMedia 4 года назад

Glad it was helpful!

@vladz3654 4 года назад

90 and 110mm rings

@1BuildMedia 4 года назад

yes that is correct, you need a pair of 90mm and a pair of 110mm see the links in the description for diodedynamics,

@christians8114 3 года назад

@@1BuildMedia is a coupe the same?

@1BuildMedia 2 года назад

@@christians8114 apologies for just seeing this. I dont want to steer you wrong. I am not sure.

@tyreseewing4574 2 года назад

@@1BuildMedia can I use a 80mm or even 100mm cause I can’t find 90mm anywhere

@1BuildMedia 2 года назад

I'm sure you can make it work

@VQMASTER 3 года назад

Just ordered everything! Found an extra set of tail lights in a scrapyard for $66! Let the project begin...... well I guess thats when DiodeDynamic gets the stock back in. Lmao

@G37keith 3 года назад

Great video been wanting custom tails and honestly didn’t want to pay the price for them 👍👍

@_.._i Год назад

Your the only one with good instructions

@rg5856 3 года назад

Thanks man you really inspired me to do this on my own. I appreciate you 👍👍👍

@1BuildMedia 3 года назад

Glad I could help

@MassiveAutoAddiction-wu9od 3 месяца назад

How do you get the big red piece back on after you cut it out.

@sanzonamckillit3763 3 года назад

You don't need the tails as turns modules. Sell em, and ditch them. You can wire directly to the OEM pigtails (ON/BRAKE/TURN) and will work fine. Maybe your issue is 1 driver trying to run 2 specific halos? Also, could just depin your wires, no need to cut unecessary holes. How is your seal? Why not use rubber buytl to seal those lights? Why ditch clear lens for halos? You recommend the 2 prime sizes for halo applications, however halo sizes can vary depending on application . FYI Halo sizes vary on build applications and builds can retain those clear OEM lens. All in all, thanks for the step by step and wish you the best

@zekekormos3917 3 года назад

This was lowkey a passive shady comment

@pablocalvillo8921 2 года назад

@@zekekormos3917 biggest hater on here bro if your so smart then please tell us how to do it without the driver

@conito925 2 года назад

What a life saver, thank you bro

@juniorcts9747 3 месяца назад

Hey got a question, currently working on a project doing the quad halo set up. I have the red halos going from black>to black Red> green , white> green and white And i have the switchback halos yellow> green with yellow and i have the black fused with the black from the red halos both going into the black from the oem harness. However when i brake the ambers turn on instead of the red. Any idea why? I only have black and yellow going to the harness.

@tonytonytony87 2 года назад

Real yaad man big up fam, I appreciate this vid

@Jordan-vy6fp Год назад

Hey man, great video. Helped through a lot of the work. Although, I’m having a slight issue, all of my things work except they don’t turn on when the headlights are on. Turn signal, lock/unlock, brake all work fine. But they don’t run when the headlights are on. Does it have something to do with the extra yellow off of the drivers? I didn’t touch those. Thank you

@1BuildMedia Год назад

Check the wiring config in the pinned comments

@jjamaya01 3 года назад

What would be the best way to color match the little part on the trunk with the reverse light? Tinting it maybe?

@1BuildMedia 3 года назад

That's right I tinted mine.

@shaunoguinn1015 2 года назад

If you open the trunk section and paint the housing with the same paint it will be identical to the main tail section. A little more work but perfect results.

@e7bk 3 года назад

What if add antoher ring but smaller to light back up I think it gonna be like Supra MK4 aftermarket tail light

@imreeflexx1878 3 года назад

great video 🔥 will be attempting this soon will it work on my g37 coupe?

@1BuildMedia 3 года назад

I am sure the process can be applied

@wrkls_ 5 месяцев назад

Could you not wire the halos directly to the circuit board?

@Solo-lo4ix 4 месяца назад

So the diode dynamic turn and tail won’t work for halos ?

@deonpalmer8758 3 года назад

How’d you get the brake light in the middle the flash when you hold the brake boss man. + thank you so much for the video

@1BuildMedia 3 года назад

There is something you can buy that does that. You can find them on Amazon. Brake light strobe controller. They normally have the info on how to install it.

@xpantherroo9083 3 года назад

Good looking on the video mad props!

@1BuildMedia 3 года назад

Appreciate that

@1BuildMedia 3 года назад

--------------------------------- Wiring Configuration ------------------------------- Factory to DIODE DYNAMICS Black to BLACK Green with yellow strip to YELLOW Green with white stripe to WHITE Green to RED ------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------- IG: @g37supreme Car Club: @876ix.lifestyle -----------------Affiliate links------------------- ------------Items you will need-------------- 1. Rotary tool Wired: amzn.to/3zyRjmW 1a. Rotary Tool Wireless: amzn.to/3vFjShI 2. Diamond Cutting wheel: amzn.to/3zsjPqp 3. Tail as turn module: amzn.to/3zndH2M 4. Rust-Oleum Primer: amzn.to/3vBxrOU 5. Rust-Oleum Gloss Black: amzn.to/3OShFWJ 6. JB Weld Clear Weld Quick Setting Epoxy, 2 packs: amzn.to/3JqILTY 7. Tarnish Resistant Silver Wire: amzn.to/3oQzU4j 8. Diode Dynamics 110mm halos with red driver: amzn.to/3Ql7tHl 9. Diode Dynamics 90mm halos with red driver: bit.ly/3vDOkZl 10. Diode Dynamics 90 and 120 red 4 pack: amzn.to/3vDCKxw

@dakhangsta 2 года назад

That looks amazing

@davidgarcia9681 Год назад

If I added load resistors woukd I put them on the wires that came w the halos or the original wire of the tailight? (G37)

@1BuildMedia Год назад

That's a good question. You put them on the original wire that will also eliminate the need for tail as turn

@blessingshonor2137 3 года назад

Blessings fam...🇯🇲🇯🇲🇯🇲

@1BuildMedia 3 года назад

respect!

@juliocampos3414 2 года назад

Anybody else have a white noise emitting from the speakers after installing? When I mute the audio it stops but once I turn it up even just one you start to hear the noise

@1BuildMedia 2 года назад

Check the comments you will see what i recommended for someone else

@josediegosilvasolis2247 Год назад

You inspired me to make my own , boss you are the best doing this video 🫶🏽🫶🏽

@Ray-il1jo 3 года назад

Awesome video supper informative and btw man how did you access the third brake light?

@1BuildMedia 3 года назад

I will do a quick video on that.

@yusufkadi5304 3 года назад

I plan on tinting the taillights. How bright are the halos and will they shine through well? Also, how much did you spend for both headlights?

@1BuildMedia 3 года назад

Yes its bright enough to shine through. I spent about $230 i believe. Thanks for checking out the video, dont forget to subscribe

@jacobguitron9446 7 месяцев назад

Has anyone tried this on the convertible? Do the same parts apply?

@clonehd6510 2 года назад

So I have to pay $170 in total? Anyway I can find halos for cheaper or nah.

@1BuildMedia 2 года назад

You can. But I went with a reputable brand.

@aafaqvirk384 3 года назад

Is it possible to get amber tailnas turn? So normal red but turns to Amber when indicating

@1BuildMedia 3 года назад

Not with my method and what I purchased. They sell different halos with different drivers, check those out. Thanks for checking out the video, dont forget to subscribe

@Stock.Foreign Год назад

how do u disconnect the plastic connecter ?

@larrysmith2647 2 года назад

Looking to try this on my G35

@user-jw7rr2zd1y 5 месяцев назад

Did you use 110 or 120 mm

@ericwilkerson5 3 года назад

Is the lense glued on? I'm asking because I'd rather use the oven method to open the light instead of cutting.

@1BuildMedia 3 года назад

Yes its glued on. Its not like the headlights. You definitely have to cut

@MsFenix89 3 года назад

Taillights you can’t just open them by heating them up.. Is welded plastic so you need to cut them open..

@ez-duz-it9683 Год назад

What fits my g37 sedan the 120 or the 110? And does it have to be the red ones because I can’t find the 90mm red without buying the 120mm

@1BuildMedia Год назад

You should be able to get those to work

@Usef320 6 месяцев назад

is it easy to take the trunk reflectors off too and spray those black? I dont like the mismatch

@1BuildMedia 6 месяцев назад

Three little bolts. I actually wrapped mine to match later on.

@dakhangsta 2 года назад

You have video on how you wired the halo to the OEM wires?

@1BuildMedia 2 года назад

See pinned comment

@bobmotherfuckinsmith3089 3 года назад

You can't use a heat gun to separate the plastic pieces?

@1BuildMedia 3 года назад

You can't no

@juniorcts9747 3 года назад

Would it work if i do diode dynamics 110 mm and morimoto 90mm halos? diode is backed up for the 90mm . Sounds crazy but was just wondering

@1BuildMedia 3 года назад

Im not sure what morimoto connections look like. I wouldnt want to lead you blindly

@juniorcts9747 3 года назад

@@1BuildMedia another question did you have to use the t-tap connector ? Or the wire pigtails.

@juniorcts9747 3 года назад

Or did you just cut a bit of the cable and twisted both wires into one (for when using only one driver for two halos) . Also do you recommend using only one or is it better to use two?

@swanknasty2527 3 года назад

Can u explain what wires to tap into u didn’t show us that part

@1BuildMedia 3 года назад

This is now in the video description and also pinned in the comments

@Angelg37s 10 месяцев назад

😍 I need this 😩

@stevenvlogss8505 2 года назад

so 220$ for basically gtr tailights

@marcusmaybin9505 2 года назад

Now I’m almost a gtr 😂

@GoofysBandit 3 года назад

Dang the 90mm are on back order for like two months...

@swanknasty2527 3 года назад

Lmao same, just got mine & doin em this weekend tho!

@elmangador7 3 года назад

Great video bro..

@1BuildMedia 3 года назад

Thanks for the visit

@iz1238 3 года назад

Same measurement as 2010 G37x coupe?

@1BuildMedia 3 года назад

Im not sure. Thanks for checking out the video, dont forget to subscribe

@machneil1779 3 года назад

Are the halo sizes the same for the coupe?

@1BuildMedia 3 года назад

I'm not sure

@moktarmalik1174 3 года назад

Would a 90 and 100 work?

@1BuildMedia 3 года назад

It would yes

@37izzyyy 3 года назад

Appreciate the vid brotha, any idea if it’s the same sizes for a g37 coupe?

@1BuildMedia 3 года назад

I am really not sure. I know the coupe has a bit of concave that cuts into the lights so you wont get the full halo for the smaller halo light, you would have to do some cutting to get it to fit properly there. Hope you find a video that helps.

@37izzyyy 3 года назад

@@1BuildMedia okay for sure thank you I subscribed🤙🏽

@juniorcts9747 3 года назад

did you end up finding the coupe size?

@37izzyyy 3 года назад

@@juniorcts9747 add my on insta. It’s the same as my name here

@370gtalej5 2 года назад

My tails are failing, the LEDS are going out. Is it possible to just do this to those?

@1BuildMedia 2 года назад

Just make sure it's not your actual wiring that's going bad. If not then you can proceed at your own risk of course

@Rick_B52 3 года назад

Really nice mod!

@cheyenne8735 Год назад

Hey bro, my right tail light is hyper flashing. Is there a solution to fix it ?

@1BuildMedia Год назад

Resistor or use the tail as turn

@kevovq3727 Год назад

Do u have to seal hole where wires come out????

@1BuildMedia Год назад

@juniorcts9747 3 года назад

Did you have to break the red thing that holds the connector/harness? Can’t seem to be able to take it off without cutting it

@1BuildMedia 3 года назад

I was able to take it out, but do what suits your situation

@juniorcts9747 3 года назад

@@1BuildMedia another question for the green wire , did you get rid of that bulb? Is it even needed? Or did u just tap it into that wire

@1BuildMedia 3 года назад

I'm not sure what you mean. Dm me on IG with a pic. g37supreme

@Liebs 2 года назад

Does this work if my driver taillight has the unlock button?

@1BuildMedia 2 года назад

Yes same principle applies. I have seem videos that details how to do it for g35 lights as well.

@44w23 3 года назад

Do you need to buy 2 pairs of the halos?

@1BuildMedia 3 года назад

You need 1 pair of both sizes

@Stock.Foreign Год назад

from the taillights

@Samy-fk5tg 3 года назад

What about that trunk part, is it doable as well!?

@1BuildMedia 3 года назад

What do you mean? the only thing I did post video was to wrap it so it matches the look of the other lights.

@g37x-modsandclips37 3 года назад

@@1BuildMedia i think he meant doable as if the trunk light was solid too and matched, not little red dots that makes it the break trunk light

@1BuildMedia 3 года назад

@@g37x-modsandclips37 Haaa I see what you mean. The trunk lights dont light up with the break lights. they only house the reverse lights in a non red section that illuminates when in reverse. I hope this answers the question @s. galarneau

@rubixlighting1057 2 года назад

Did you get a whine from the cabin when you turned them on?

@1BuildMedia 2 года назад

with my factory radio no. with my tesla screen yes.

@TrustMyStyle Год назад

90mm and 120mm Should work fine right? what you think?

@1BuildMedia Год назад

I think those should be okay

@connorhearne8695 Год назад

Do we have to Dremel it or can they be heated and pulled apart?

@1BuildMedia Год назад

Dremel

@austintorreflores5104 3 года назад

How did you get the 3rd brake light to flash?

@1BuildMedia 3 года назад

I'll do a video soon

@josevilchez9829 2 года назад

Do you have to solder anything for this project?

@1BuildMedia 2 года назад

I didnt have to

@user-fs4ci9yr4d 3 года назад

Видео крутое но был бы перевод цены не было бы

@CookedRigatoni1 2 года назад

How did u seal it, no water got in after a while?

@1BuildMedia 2 года назад

I used the expoxy to seal the edges no water gets in the ligt its been 2 years and counting

@manuelpena8714 3 месяца назад

You know you didn’t have too use a dremal you could of used a heat gun too take them apart

@staticg4978 3 года назад

🤝

@chasebandz7083 3 года назад

Any links for the halo rings

@1BuildMedia 2 года назад

see description

@Caleb____ Год назад

What gauge wire do you use?

@1BuildMedia Год назад

Im not sure I understand the question all the wires cames with the halos.

@swainsonmckenley5850 3 года назад

Nice!

@alejandroalvarez6268 3 года назад

Can someone help me out, I did mine but my won’t turn on when my lights are on they will blink n turn on when break

@1BuildMedia 3 года назад

look at my pinned comments for wiring info

@alejandroalvarez6268 3 года назад

I did but now when I turn my left blinker they both off

@1BuildMedia 3 года назад

Did you figure this out?

@espy56 2 года назад

Hey I did this project and when the halos are at low brightness (like when you turn your headlights on) the LED driver box makes a very high pitch ringing noise, audible from the cabin. But when I press on the breaks and the halos go to a more intense brightness the ringing noise stops until it returns to normal brightness. Any thoughts on this noise?

@1BuildMedia 2 года назад

What kind of radio? Stock or android?

@espy56 2 года назад

@@1BuildMedia stock, and I know it was coming from the LED driver for the halos, I held it up to my ear.

@1BuildMedia 2 года назад

Took a minute to find this link. I had the same issue but I have the Android radio. It was so bad I put my stock radio in and all of that went away. That wasnt permanent as I wanted to put my Tesla screen back in. I ended up purchasing this device which pulls power directly from the battery: www.diodedynamics.com/switchback-solid-state-relay-harness-pair.html You will have to do this at your own risk. I have no videos of it nor do i remember how to install it. Also you should double check your wires as it could be a grounding problem. Like I said I had no issues when this was paired with the stock radio, then again I had a subscriber that did both his headlights and swapped the radio and had no issues whatsoever.

@ramongarrick2640 3 года назад

Big up 🇯🇲

@jamesfarley4504 2 года назад

Would you do this for money? Looks like too much work for me!

@1BuildMedia Год назад

I have thought about it. I am not there yet. alot of guys do it, you can find them on IG.

@glocktv2411 2 года назад

Does this work on g35?

@1BuildMedia 2 года назад

I'm not sure. You got to go to the site and find out

@joeldiaz615 3 года назад

Does the paint affect the reflector at all?

@1BuildMedia 3 года назад

No not even a little bit

@joeldiaz615 3 года назад

What about the side leds? Did you do anything to those or just sprayed over it?

@1BuildMedia 2 года назад

@@joeldiaz615 I sprayed everything. only thing you see are two halos. see my ig @g37supreme

@davidgarcia9681 2 года назад

Do you have to spray paint them?

@1BuildMedia 2 года назад

see full video.

@davidgarcia9681 2 года назад

@@1BuildMedia yea I know you did but do you have to?

@1BuildMedia 2 года назад

You don't have to but I'm not sure how it will look with the chrome when it's illuminated

@davidgarcia9681 2 года назад

@@1BuildMedia just finished them I left them chrome still looks good though only because you just kind of see the reflection of the bottom but still look kind of the same thanks a lot for the tutorial saved a couple hundred bucks

@Blinx777 3 года назад

Can I pay someone to do these for mine?

@1BuildMedia 3 года назад

You can send me a dm on Instagram @g37supreme we can talk there

@Blinx777 3 года назад

@@1BuildMedia I have a g37 ipl coupe. Would it still work?

@1BuildMedia 3 года назад

The same method applies

@moktarmalik1174 3 года назад

How much did the parts cost you?

@1BuildMedia 3 года назад

$280 I had most of the tools already.

@mannygee5111 3 года назад

What’s that tool called that you’re using to open the lights up?

@1BuildMedia 3 года назад

Rotary tool or dremel. Link in description.

@Bri11ante 3 года назад

Bro what about us 1st gens 🤔

@1BuildMedia 3 года назад

sorry man I could only work on what I have, I am sure some of it is applicable to you.

@sanzonamckillit3763 3 года назад

I can build you some! Check out my work on Instagram @sandiego.retrofit

@DJKIDWU 3 года назад

876lifestyle

@thatdallastx7861 Год назад

Can u do mine

@1BuildMedia Год назад

I dont

@reelmodzz1709 21 день назад

🤦🏻 bro really used a dremel to open the tail lights. Wow !!! And I thought I was dumb. It’s called heat gun bruh you gotta watch RU-vid videos before actually making one and fucking up those tail lights. Definitely won’t attempt this to my tail lights. I’m done here. NEXT !!🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻🤦🏻

@1BuildMedia 18 дней назад

Thank you so much for stopping by. I appreciate your time and feedback. I will sleep better knowing that you did!