Тёмный
No video :(

Galaxy Resin Coasters - Tutorial, Use resin layers to create a stunning 3D galaxy 

Resin As You Wish
Подписаться 44 тыс.
Просмотров 37 тыс.
50% 1

Thank you for watching! This was my first video so there are a few things I should have put in.
I waited for each layer to harden before doing the next (the resin is hard in 12 hours, but I usually wait 24 simply because it fits my schedule)
Each color I use is paint or mica powder mixed with clear resin
My biggest challenge is keeping the coaster thin :-)
The glow powder on these was such a small amount compared to the other colors used, I didn't think about adding to the video (sorry!) To see how they look when glowing in the dark go here: pin.it/69mU0WG
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/...
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Rezin Arte Luster Pigments
Rezin Arte Luster Pigments
Sweet Violet (the base color)
Aquamarine: amzn.to/3ivHdtM
Ginger Bloom (bright fuchsia): amzn.to/31MqIE0
Purple Galaxy: amzn.to/2VNawOM
Found at: www.colourarte.com
(She also sells these on Amazon)
Planets:
Pearl beads (there are many places to research and purchase these in different colors)
amzn.to/3gvrsl4
Microbead Shaker
www.michaels.c...
or multicolor options
amzn.to/2YZzL2x
Glow Powders:
Kiwi (green)
Orange
Blue
amzn.to/3fdBerP
Gold Flakes: Many versions of these can be found I used:
KINNO Gilding Flakes - Color 2.5 Imitation Gold/Copper/Silver
amzn.to/3dU1h5K
Coaster bottoms:
Coaster Cork bottoms (regular size):
amzn.to/2ZFG6iC
(this is just link where I found them - you may have a better idea)
Coaster molds:
3.9 inch: amzn.to/31HJ2hr
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/s...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 136   
@melbaguio
@melbaguio 4 месяца назад
I am amazed with all your beautiful work!!
@nicsprettypapers4843
@nicsprettypapers4843 3 года назад
This is what I aspire to.
@Rema1973
@Rema1973 4 года назад
Thanks alot for showing the WHOLE process .. alot of artists skim over the finishing of the project ... wonder work 😍
@everettkarter5716
@everettkarter5716 3 года назад
I know it is kinda randomly asking but does anybody know of a good website to watch new tv shows online?
@jgranese02
@jgranese02 4 года назад
Stunning! It must be so satisfying to pop those out of the mold after waiting so long!
@jtme8108
@jtme8108 2 года назад
I love outer space and you've captured it perfectly! These are positively beautiful.
@joyrichards9261
@joyrichards9261 3 года назад
They are the best. I adore skies especially night skies ❤️❤️❤️❤️
@janehall9100
@janehall9100 4 года назад
1st video, wow, you are a natural. Thank you for sharing......
@darlenewesten4655
@darlenewesten4655 Год назад
Love your work!! I’m just starting and I’m inspired!
@annettehill6264
@annettehill6264 2 года назад
So so beautiful. I love your colors and your composition. Enjoyed watching you. Thank you for sharing
@DonaldMelton
@DonaldMelton 3 года назад
outstanding work
@melodymarek1882
@melodymarek1882 4 года назад
Just found this video and it's a keeper!! This is amazing and I haven't found another person who does this style so you can take all the credit when I make mine and add them to my Instagram!! Bravo, well done for your first video ever!!
@lh9933
@lh9933 4 года назад
These are beautiful! Love the colors & the depth!!
@robyngriffiths9630
@robyngriffiths9630 4 года назад
I’m amazed that you can accomplish all that before the resin sets.
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Hi, I do work with a couple different resins, one of the things I learned quickly is the more heat you apply the faster it sets (chemical reaction) if you work in a warm space it sets better and with a glassy surface, if your space is cold it can cause the cure to have divots, waves or dimples. In the video you see I refrain from popping the micro bubbles with the torch until I was working on that particular coaster - that helps, my room was at 65 degrees (until the final clear coat) and if all else fails you can do the gold leaf last and even apply it to cured resin and put another coat on top to seal it in- the gold always looks fabulous regardless
@robyngriffiths1725
@robyngriffiths1725 4 года назад
@@ResinAsYouWish thank you for all that info. I am just starting with resin so your information and video was so helpful.
@sandrakeaton634
@sandrakeaton634 3 года назад
Gorgeous
@Sccm6956
@Sccm6956 4 года назад
Great tutorial! They are so amazing! I’m going to try it soon! If mine are half as good, I’ll be happy!
@thisdollslifejenna3841
@thisdollslifejenna3841 4 года назад
Beautiful outcome!! I love working with Resin & Coaster's are such a blast to do! Yours turned out amazing!! 1st time to your channel, & awesome 1st video!! Pro tip > Amazon sells these amazing Silicone Cups. I use them for mixing my Mica's, Paints, Glitters, & Alcohol Inks into the Resin. They also "double" as holder's for my Art Resin Pieces, because they're 100% Silicone! I also use Silicone spoons, & I purchased 3 Silicone "LOLIVEFE" mats that work great for Resin & Acrylic paint spills:) Another Pro tip>> if you lightly hit the back of your tape with heat gun, it will pull off, so much easier. As to where the Xacto knife may scratch or mar the surface. Thanks for sharing!! 💜🧡💙🎨👏👍 If you lightly hit the back of your tape
@ItsMeTrish
@ItsMeTrish 3 года назад
Wow they are amazing!! Thank you for sharing!!
@Mj-vy8ng
@Mj-vy8ng 4 года назад
I have been inspired by this ! Thank you so much for sharing
@peggyrosales9653
@peggyrosales9653 4 года назад
The most beautiful thing I've seen, thank you for sharing!!!
@oldman6191
@oldman6191 4 года назад
oh man those are awesome well done
@lisablasdell7088
@lisablasdell7088 4 года назад
Awesome tutorial! Thank you for helping and being transparent in the tutorial. ♡ gorgeous work!
@rogerlopez3359
@rogerlopez3359 4 года назад
These are amazing. You've inspired me!
@katharinecooper9645
@katharinecooper9645 4 года назад
Very pretty... Heating the bottom a little bit might make removing the tape easier!
@luisclaudioc.dasilvadasilv5234
@luisclaudioc.dasilvadasilv5234 4 года назад
Here in Brazil, if I take the time you took between the 1st and the last piece, certainly a job like this would not be perfect. If it is not a differentiated resin, it can only be the climate. hug
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Interesting! What if you worked in a cold room until the final coat?
@theresalatimore7055
@theresalatimore7055 4 года назад
Absolutely Beautiful
@margokruger2067
@margokruger2067 4 года назад
Stunning!!!
@LalaMDavis
@LalaMDavis 4 года назад
Ma’am , these are phenomenal!!! 🔮
@sandrakeaton634
@sandrakeaton634 3 года назад
Love them
@canavanseniorchrissy4003
@canavanseniorchrissy4003 4 года назад
Great job! Love how they turned out!
@lindablevins5
@lindablevins5 2 года назад
Beautiful!! 😍
@cherylwilkins5457
@cherylwilkins5457 4 года назад
Totally beautiful! Wow!
@MoJordanReads
@MoJordanReads 3 года назад
I love your pieces. I think they're all very pretty. I know some people like seeing the whole process but I don't like the longer videos as much. Maybe a mix of full and shorter could be an idea for the future. I'd love to see more of your stuff but I'm not one to watch a 20+ minute video. But that's just my thoughts 😊 Still love your work!
@ResinAsYouWish
@ResinAsYouWish 3 года назад
hi, I do understand, a helpful thing I do for all the videos is pin a comment noting the time of the video for each layer, that allows you to click the time link to the next layer, or completely skip to the end. Hope that helps!
@vraney59
@vraney59 4 года назад
Spectacular!!!
@amsaied
@amsaied 4 года назад
Beautiful
@brendasmith529
@brendasmith529 4 года назад
Stunning! 💜💜💜
@AngelasMixedMediaArtist
@AngelasMixedMediaArtist 4 года назад
Wow so beautiful love ❤️
@CreativecraftClosetJaneMarge
@CreativecraftClosetJaneMarge 4 года назад
just so pretty tfs i just subscribed thku
@cassiealesagapeinspiredcre853
@cassiealesagapeinspiredcre853 4 года назад
These are just stunning!!! You should take a picture of them in the dark. You put glow powder in them correct? They are fabulous!
@ResinAsYouWish
@ResinAsYouWish 4 года назад
thank you for suggesting this!!! I put a link to my pinterest board in the pinned comment and in the video description. Because the glow powders I used were small amounts the effect isn't startling, but you can see them softly glowing on the coffee table when you turn out the lights - I LOVE IT
@valeryzakarzhevskaya5202
@valeryzakarzhevskaya5202 Год назад
Amazing ❤🎉 may I ask what viscosity is the resin you used ? Is it high ? Thank you 😊
@user-dy9dn5cw1q
@user-dy9dn5cw1q 4 года назад
재료 하나씩 보여주는거 넘나 친절
@kaceeboxers3580
@kaceeboxers3580 4 года назад
Wonderful video and gorgeous coasters. Mega talent!
@bitsurfer0101
@bitsurfer0101 2 года назад
Do you get most of air bubbles out by using the heat gun and torch?
@barbking2708
@barbking2708 4 года назад
Very cool💕
@dianecrites8452
@dianecrites8452 3 года назад
I have a question, why do you sand them before the final coat of resin and do you use sandpaper? Grit? Your coasters are so beautiful!
@ResinAsYouWish
@ResinAsYouWish 3 года назад
thank you, here is how I prep for the final coat: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uu7-6snHEZk.html
@dianecrites8452
@dianecrites8452 3 года назад
@@ResinAsYouWish Thank you so much! 😊
@dianecrites8452
@dianecrites8452 3 года назад
@@ResinAsYouWish Thank you for sharing your techniques and processes, some artists will not do that. You are a beautiful person for doing that❤️
@gintarezaldaryte3972
@gintarezaldaryte3972 3 года назад
Thank you for sharing your videos. Your coasters look soo beautiful! Absolutely amazed! Just have a question about the resin you use. How good is the resistance to heat? Searching for the resin to use for my coasters. Any help is much appreciated!
@Ilovemoneyandmoneylovesme
@Ilovemoneyandmoneylovesme 4 года назад
pretty!
@corrin03
@corrin03 Год назад
These look awesome!!😍😍 How long do you let it sit for between each layer of resin?
@ResinAsYouWish
@ResinAsYouWish Год назад
Just overnight
@desidarlingly
@desidarlingly 4 года назад
very cool
@karenturner5443
@karenturner5443 4 года назад
However they are beautiful
@yvonneslaughter1
@yvonneslaughter1 4 года назад
Yaaaaassssss!!!!
@naudiaangelica6925
@naudiaangelica6925 2 года назад
I try to use resins that have a heat deflection up to 500 degrees F if it's going to have hot drinks on it. Can I ask what resin you're using, or if these are just ornamental?
@naudiaangelica6925
@naudiaangelica6925 2 года назад
I ask because these are so stunning. I would just hate to leave rings on it because of putting a hot mug on it!
@ResinAsYouWish
@ResinAsYouWish 2 года назад
these are very sturdy coasters, and they still look great 2 years later - the resin I am using here is : amzn.to/3OE2gJI
@naudiaangelica6925
@naudiaangelica6925 2 года назад
@@ResinAsYouWish Awesome!!
@victoriademeyer7831
@victoriademeyer7831 4 года назад
Is it better to have both a heat gun and butane torch when working with resin? I have a heat gun currently.
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Victoria DeMeyer I really need both. The heat gun makes the resin thin out and move, the torch will pop the micro bubbles and also assists in some of the lacing effects. I]the torch doesn’t move the resin - I torch each project every 15 min for an hour after I’m done because the bubbles will keep coming up until the resin hits a certain solidity
@victoriademeyer7831
@victoriademeyer7831 4 года назад
Resin As You Wish thanks for the info! It looks like I’ll be needing to get myself a torch!
@christinemitchell3472
@christinemitchell3472 3 года назад
Gorgeous, how long did you leave between layers
@ResinAsYouWish
@ResinAsYouWish 3 года назад
I usually wait overnight, but all you need I for it to harden
@katyruddiman9680
@katyruddiman9680 4 года назад
These are pretty. You say 4 layers. Are you letting the layer with the violet color dry before adding on white, Aqua ,magenta colors.
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Katy Ruddiman yes, I waited 24 hours -it keeps the colors from mixing too much (sorry about that not being clear this was my first video)
@reneerandall9916
@reneerandall9916 4 года назад
These are absolutely beautiful! Question when you use that much heat are you not having issues with the mold melting
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Not at all- occasionally I have a hard time getting them out of the mold so I use the heat gun on the outside and it helps them pop out easier as well
@sabzbet1575
@sabzbet1575 3 года назад
Did you wait any time in between, like after adding the main layer, did you wait on adding the colors? Or you did it back to back?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, I waited till the resin was hard between each layer (I have a note pinned in the comments of this video that labels each layer) after the 4 the layer, I waited 24 hours before sanding I did a a re-do video of this style galaxy coaster because this was one of my first videos and I didn't do that stellar of a job explaining the process
@maryleemartz3722
@maryleemartz3722 4 года назад
Sorry I have another question. You are doing one coaster at a time. How do you not have your colors get hard before you use them?
@maryleemartz3722
@maryleemartz3722 4 года назад
This video is great! Do you let you layers dry before you put next layer on?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
MaryLee Martz Hi, I do work with a couple different resins, one of the things I learned quickly is the more heat you apply the faster it sets (chemical reaction) if you work in a warm space it sets better and with a glassy surface, if your space is cold it can cause the cure to have divots, waves or dimples. In the video you see I refrain from popping the micro bubbles with the torch until I was working on that particular coaster - that helps, my room was at 65 degrees (until the final clear coat) which may be why my colors don’t harden - but also I find they harden if the color or paint mixture has too much color added in (the color added should be less than 10% of the amount of resin in the cup) - i do wait for the resin to cure between each layer 👍
@maryleemartz3722
@maryleemartz3722 4 года назад
@@ResinAsYouWish thank you, I loved your videos!
@lisablasdell7088
@lisablasdell7088 4 года назад
I'm on step 3 - are you just mixing the glow powder into the matching color resin? Trying not to mess this up!
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Lisa Blasdell the glow powder I mix into clear resin - depending on the color you have to add the powder until it’s the color you want, (the glow powders tend to look diluted) occasionally I’ll put a drop of paint that matches the powder, in the mix so the color pops more
@lisablasdell7088
@lisablasdell7088 4 года назад
Thank you so much. This round I added it to the colors. We will see how it turns out!!
@burpdigest
@burpdigest 3 года назад
May I check where did you get the micro beads shaker?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Here is a link: www.michaels.com/signature-microbead-caddy-metallics-by-recollections/10403787.html
@TMHAY86
@TMHAY86 3 года назад
How did you get the green and orange glow so vibrant in color?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
When you add color to a clear layer it keeps them from getting muddied up by the darker colors. Instead the seem to sit on the dark background and show up better because they grab the light on all sides being suspended in the clear resin. So it’s more a trick of the layers
@TMHAY86
@TMHAY86 3 года назад
@@ResinAsYouWish I used the glow powder but it comes out clear. Do you add color with the glow powder?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
@@TMHAY86 yes, but only a few drops or it won’t glow, the colors used for vibrancy are the mica and the glow powders worked in don’t make a huge impact of the overall colors - until you turn off the lights (sorry, this was my very first video and I learned a lot on how to go these videos since then)
@ResinAsYouWish
@ResinAsYouWish 3 года назад
@@TMHAY86 also I re-did this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NK_f_Trff7k.html and you can see the color mix at 05:27
@TMHAY86
@TMHAY86 3 года назад
@@ResinAsYouWish perfect, thank you! That helped. :)
@sakujo20
@sakujo20 3 года назад
From ~ 7:40 to ~8:15 u used a heat gun plus a torch on one piece. Did your resin start to cute? If not, did you use heat resistant resin? Would you recommend less/mid/high viscosity resin to try this?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
The resin didn’t start to thicken until I was putting the gold flakes on the last 5, I usually save the gold flakes for last across all the coasters because no matter how thick it gets the flakes will still stick to the top. I use countertop epoxy (link in the video description) it is a mid viscosity- and not industrial. It’s uv and heat resistant and I have about 30 minutes of work time
@sakujo20
@sakujo20 3 года назад
@@ResinAsYouWish thanks for the Infos. 🌹 When I use a heat gun my resin starts curing and i bought 4,5 kg of that 😕 I need to use low heat or a hairdryer, i guess. Plus, I'm trying to create some of your coasters and i want to gift them to someone, but my resin is only heat resistant up to 55°C. That means, if you put hot drinks on the coaster, the coaster sticks to the glas 😞. I now ordered a transparent heat resistant varnish spray. Gonna try that. Do you know if your heat resistant resin sticks to glasses with hot drinks?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
@@sakujo20 Hi, there have been a couple times that that I didn't mix the resin properly and the cure never hardened completely - this would cause the mug or glass to indent the coaster and sometimes stick, otherwise, these coasters are heavy enough that they do not stick to the bottom when done correctly
@ladymidnightsnacc8969
@ladymidnightsnacc8969 3 года назад
so pretty! if i were to make something like that i will keep it for myself haha. i have a question tho, between the layers do you wait for it to fully cure or half cure?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Just until it’s hard enough to tap on, for me that’s about 12 hours - but my resin doesn’t fully cure for 3 days
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, sorry I just saw your question, I use: Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
@jessiejonas2769
@jessiejonas2769 3 года назад
Beautiful!!! This may be a silly question, but in your final step do you put over the whole coaster or just on the bottom? If you tape the whole coaster, do you put the final layer on top of the tape?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, this video shows much more clearly: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uu7-6snHEZk.html
@jessiejonas2769
@jessiejonas2769 3 года назад
It’s funny bc as soon as I posted my question I saw your sanding and prep video. 🤪 That video answered ALL my questions! Thank you so much for your knowledge and your talent! You’re very inspiring!
@lunastein4440
@lunastein4440 4 года назад
I super love your work!!!! Can I ask how hot should the settings of the heat gun be?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Hi, I have a heat gun that has low to high heat - I typically leave the heat setting in the middle.
@luisclaudioc.dasilvadasilv5234
@luisclaudioc.dasilvadasilv5234 4 года назад
your work is beautiful! I want to know if this resin you use is special, because in the 3rd phase, you take a long time between the first piece and the others
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Luís Cláudio C. da Silva da Silva hi, it isn’t special, it’s an epoxy countertop brand I buy on Amazon it takes 60 minutes for it to thicken to a peanut butter like consistency- and that is pretty slow setting. I also live in Alaska but I don’t think the climate affects it that much
@luisclaudioc.dasilvadasilv5234
@luisclaudioc.dasilvadasilv5234 4 года назад
Alaska !!!! Uoooo, how cold! Thanks for your answer
@yobebemama1
@yobebemama1 3 года назад
Is there a way to achieve this in a tall mold with a small pour hole? I’m new to resin and everything I see is that only flat open molds can be customized like this.
@ResinAsYouWish
@ResinAsYouWish 3 года назад
yobebemama1 it would definitely be a challenge but if you filled your mold half way - let it set, then started the layers you could probably pull it off
@dalialovesdoggies4361
@dalialovesdoggies4361 Год назад
HELP. I couldn't see what you did with Fuc'a bigger
@rose154223
@rose154223 2 года назад
Do you let each layer cure?
@ResinAsYouWish
@ResinAsYouWish 2 года назад
I let each layer harden enough to tap on, but not fully cure
@lindsayjennings3616
@lindsayjennings3616 4 года назад
What Brand Resin are you using? What would you recommend for a beginner? Craft resin or casting resin?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
when it comes to a functional piece, like coasters, you need the Casting (Epoxy counter top) so the resin will be glassy and resist looking dull after being used. In this video I"m using the brand MiraKleer I like it because it's not as thick as some or as thin as others :-)
@ResinAsYouWish
@ResinAsYouWish 4 года назад
1:01 2nd Layer Planets and Sparkle 4:36 3rd Layer add color (gold flakes) 18:00 4th Layer clear coat with a touch of color 22:02 Smooth and Sand for final clear coat 26:45 Final To see how well they glow: pin.it/69mU0WG
@teekotrain6845
@teekotrain6845 3 года назад
Nice thank you
@colorfulmind1181
@colorfulmind1181 4 года назад
Are you using a heat gun to blend colors ??
@ResinAsYouWish
@ResinAsYouWish 4 года назад
colorfulmind 1 yes I am
@hillarygetz204
@hillarygetz204 4 года назад
Did you wait for each layer to cure before starting the next, and if so, for how long?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
I wait 24 hours between each layer
@debbytime
@debbytime 3 года назад
What resin do you use?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, I updated the comments with a link
@karenstrong8887
@karenstrong8887 4 года назад
I just found this and I love your coasters. Finally one that isn’t a flower or a geode and they are beautiful. Can’t wait to watch more. Do you wait for each layer to harden? 🌷
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Karen Strong thank you! Yes I wait for them to harden 12 to 24 hours 👌
@CheyenneB-qn3jg
@CheyenneB-qn3jg 4 года назад
How long do you wait in between layers?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Cheyenne B5150 hi, I wait 12 to 24 hours between layers - basically once you can tap on the resin - I must wait 24 hours before I can sand it though
@thomasbauer2532
@thomasbauer2532 4 года назад
Hello Can you tell me how long you wait by the third layer after you put the clear Resin of it ....before you make the white.Auquamarine,Ginger Bloom of the clear Resin ?? I know that you wait between the Layer allways 24 hours ...but you show 3rd Layer add Color , put than clear of it goes with the heat gun and Flames over it for the bubbles and than you mix the colors with clear Resin ...how long was the time between that ??
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Thomas Bauer hi there - except for the base layer (black) each layer is clear resin with color. The little cups are color powder or paint mixed into clear resin. Each layer throughout the entire process I wait for 24 hours. I do that because resin instruction are meant for a thin coat on a countertop - and compared to that -these coasters are thick. The resin is hard at 12 hours and the layers could probably be done every 12 hours but I wait longer because I find if I rush it there will be a slight ripple effect on the top of the final cure - this could also be because I live in a colder climate. (Each type of resin has curing instructions 12 hours to 3 days seem to be standard.) I have found that I must wait 3 days after a coaster is finished to set a heavy object on it or it may leave a slight dent) please let me know if I didn’t answer your question fully 👍
@thomasbauer2532
@thomasbauer2532 4 года назад
@@ResinAsYouWish maybe i didn't put my question right By time code 4.22 you put clear Resin on the 2 nd Layer ( in your video that was 3 rd Layer add color ) than you comes with the heat gun for the bubbles . By time code 5.22 you show the colors ( white , Gold,Ginger Bloom ) and by time code 6.22 you put them of the clear Resin and the don´t sink in and stay of the clear Resin You wait only the 2 minutes in the video in real time too before you add the color of the clear Resin ??
@ResinAsYouWish
@ResinAsYouWish 4 года назад
@@thomasbauer2532 Sorry about that, I did misunderstand at 4:22 all the way through 17 minutes, I"m working on the same layer. I do not stop and wait for the resin to cure from 4:22 all the way through 17:00 (Sorry for the confusion)
@thomasbauer2532
@thomasbauer2532 4 года назад
@@ResinAsYouWish Thank you for your help ...last question , how many clear Resin you make allways on for to fill the six mold and how many you make on for a color :)
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Thomas Bauer i mix 8oz of clear resin. It takes 4 oz to put the clear in all 6molds. The rest I split into the color cups, I always end up with too much color, but for me that’s easier than having to mix more in the middle of a layer.
@Ssssylable
@Ssssylable 4 года назад
Hi! Did you sand the whole of the resin coaster?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
I use a dremmel with sandpaper head attachment (really fast) to smooth the edges and across the top. I only sand the bottom if a drip of resin needs to be removed
@dalialovesdoggies4361
@dalialovesdoggies4361 Год назад
AMAZING. TOTALLY beautiful Annoying repetitious music
@karenturner5443
@karenturner5443 4 года назад
You need to slow down videos or do voice overs can't tell if your doing in layers or all at once
Далее
How to Make Geode Agate Resin Coasters
11:04
Просмотров 106 тыс.
WILL IT BURST?
00:31
Просмотров 20 млн
Х.евая доставка 😂
00:23
Просмотров 1,3 млн
5 Ways to Get Bubbles Out of Resin | Resin ART
8:37
WILL IT BURST?
00:31
Просмотров 20 млн