Game Changing Upgrades Going On The 9530T

Подписаться 407 тыс.

Просмотров 281 тыс.

50% 1

Want to wide stance your 2 track? www.eramanufacturinginc.com/
We are a family farm located in west central Minnesota. est. 1918
We enjoy to share our part in agricultural with you and show our followers the ups and downs of farming. I hope you enjoy our videos and please don't forget to subscribe.
Check Out Our Sponsor Agricultural Chemical Solutions-
Ships anywhere in the states check out their chemical prices and join the already 3000 farmers that already get their chemicals there.
If you are a new customer make sure you mention you came from Larson Farms and you will get 5% off your order if your order is more that $5000 you'll get free shipping and a $100 gift card to farmfocused.com for Larson Farms Merchandise!! So give them a chance and see how they can help your farm out!! www.agchemicalsolutions.com/
We invite you to check out our website. Where you can find Yankum Ropes, Larson Farms/Big Swede Merchandise, Midland Radios, Links to some of our favorite trusted brands you can find it all on our website.
www.larsonfarmsmn.com/
Want the best phone holder/cupholder for your farm check these out!
cobbriverdesign.com
Want To Send Us A Letter? We Would Love To Hear From You!
Our Address:
Larson Farms
P.O. Box 8
Ortonville Mn, 56278
Business Email-
cslarson@live.com

Опубликовано:

7 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 303

@williamhamill813 3 месяца назад

You can definitely take the pull start and rotate it. The spring will stay coiled.

@JackL75 3 месяца назад

Pretty slick install of the hydro pump on the trailer but were I you I would think about taking it by a local upholstery shop and having them make a heavy vinyl snap-on cover for that bad boy. If you don't it won't take long for it to match the underside of the trailer with mud and dirt blow-off from those back wheels. Brody will have to blow the carburetor right off that thing in order to get it clean and you know Dougo isn't going to get his hands dirty pulling on no filthy rope handle. Just thinkin'...

@greggrosenthal7432 3 месяца назад

Go to Ag Storm Equipment and get a set of Track Wheel Cleaners to stop the trash from building up and wearing the paint off of your rims.

@Dennismelnychuk 3 месяца назад

Make sure to retorque those extension parts a couple times regardless of how busy the season is.

@halfalanche 3 месяца назад

I think we need a drinking game for how many times Chet says “I’m super excited for this” lol. Love your videos Chet great job

@spidermike66691 3 месяца назад

Nothing I like more than starting the day out with a Larson farms vid... keep up the great work boys

@watermanone7567 3 месяца назад

You can rotate the pull starter on a Honda engine to different positions with no issues. Thanks for the video

@Nicholaskleyn 3 месяца назад

Good Evening Larson Farms. Thanks for another video.

@grega-kendalheightsdecorwo9511 3 месяца назад

So back in the day, my heavy truck mechanic father would just take the center hub nut and bearing out and remove the wheels and drum all at once! (Get a wheel dolly, makes life easier without removing the tires every time you do a brake job)

@piperdoug428 3 месяца назад

Send the "Big Swede" up to one of our Scottish Highland Games, test his hydro pole tossing and farmers walk abilities lol

@montemiller3447 2 месяца назад

Fantastic! I wish you well during the planting season. I can hardly wait!

@joshuanicholsjr5327 3 месяца назад

we all love the stuff you guys share with us, and the new tech stuff to make the farm more productive, amazing be safe great stuff god bless

@AlphaDawg77 3 месяца назад

They’re from my home province of Manitoba! Cool beans!

@DumbOhioFarmboy 3 месяца назад

You should make a line of larson farms bump caps

@BruceBergman 3 месяца назад

They're Fungi? 😂hi, Mushrooms! 🍄 17:40

@jonicotten8343 3 месяца назад

You 3 are all young men with outstanding problem solving minds. Keep it coming.

@anntomecklebarger3599 3 месяца назад

Chet. Go to your welding supply store and get some beanies . It helps with a little on sharp edges.

@chrisgallagher3703 3 месяца назад

Well Done as always Fellas!!

@blanekopp7339 3 месяца назад

😢I bet that tractor would do some killer donuts!!! Again great content thanks for Sharing.

@carriegrosenick6426 3 месяца назад

Thanks for another great video Chet.

@danasheets1774 3 месяца назад

Awesome experience

@user-ee6jl6hd6g 3 месяца назад

Thanks for another video ---- fun visit.

@steveneal2706 3 месяца назад

Great video guys. Thank you guys

@tomrogers323 3 месяца назад

Just great video! Keep up the great job!

@rudysiebert3469 3 месяца назад

Canadian content love it

@tighman8970 3 месяца назад

Now that you have put spacers on it Chet, you can put on American Force Rims🤣

@Ghost23100 3 месяца назад

On the Honda motor make sure you shut the gas when not using. The gas will leak into the crankcase while driving down the road.

@nickhartsock9849 3 месяца назад

They don’t get get screwed up. We’ve had to rotate our air compressors handle and it has the same motor honda

@dogcreek8547 3 месяца назад

Thanks, I needed another fix. Nice!

@brianwilton8555 3 месяца назад

great video

@calebgalbreath0198 3 месяца назад

Keep up the great work chet.

@johnbeltner8125 3 месяца назад

Love the show. Great work Gents.

@bryanlloyd1099 3 месяца назад

Awesome video!

@fmerkl 3 месяца назад

Great vid Chet!

@davidkimmel4216 3 месяца назад

Thanks

@napster765 3 месяца назад

Geniuses from Manitoba 💪!

@matthewevans1948 3 месяца назад

Best into yet. Keep it up lads, I’ve been watching for years!!

@Kats4Brekkie 3 месяца назад

You all need to take your struggle bus shirts and cross out the struggle and print over with the word fail! Love watching the struggling fails.

@philipberry2704 3 месяца назад

As always another AWESOME and ENTERTAINING video Dougo got so aggravated he just went to the corner and got as high as he could go !!🤣🤣🤣

@davidrobins4025 3 месяца назад

The new wide stance looks great. I trust you will be happy with the results come planting time.

@dennislamers986 3 месяца назад

Poor Dougo. Pretty impressive kit.

@userDominic_78 3 месяца назад

Another job well done Chet, Eric, and Brody, will be very handy to not have to take a tractor with you to load/unload that trailer 👍

@jamesflanigan3883 3 месяца назад

Looking good lady's

@AssDust 3 месяца назад

Just played in Rosenort, MB last weekend

@alexleklund 3 месяца назад

Yup when the lowboy trailer is up, the big holes near the bottom hinge are where transport lock pins go. So they lock the neck up vs. Hydraulics holding it.

@ryankrienselokker6635 3 месяца назад

Recently subscribed to your channel. Love it!! Farmers need many talents I'm finding out. Enjoying the videos!!

@miltonvoges6848 Месяц назад

The reason for the type of wheel on lo-boy trailer is strength. Budd style wheels are bad for cracking from lug to lug and tearing centers out of rims. Most all extra heavy duty applications will have the Dayton style hubs(what you have now)

@waynetaylor121 3 месяца назад

You take pain in your stride ,well done, young man....😮

@dmorgan28 3 месяца назад

Good morning guys. Hey this was very interesting. Cool video. Take care and have a good one!👍❤️

@willyfindlay4398 3 месяца назад

Love Dougo and his battles with technology, I can so identify with him on that. Great stuff on the Donkey hydraulic unit for the trailer.😊

@cozdiver 3 месяца назад

Dougo, I feel your pain, lol. Mostly because that look made me laugh so hard my ribs hurt! Thanks for that, I really needed that today!

@dougvinduska9593 3 месяца назад

Glad Jean has nurse friends they can check out your head wound! Honda just like the mower 1 pulll and it starts.

@Topdogswmi 3 месяца назад

you may want to add a pilot operated check valve or counterbalance valve to keep the trailer from leaking down. But they won't work directly with a float feature.

@donaldtayloe4406 3 месяца назад

Those 3 screws pulls the pull string off in a complete assembly and it can be rotated

@PitterPat123 3 месяца назад

Keep them coming boys! Mr Dougo you stay on them till you get satisfaction for your money or you get Chet to do it!!!!😂 Sending blessings to everyone @LarsonsFarm

@randycharest4507 3 месяца назад

I ENJOYED WATCHING THE VIDEO CHET 😊

@ooper3604 3 месяца назад

a small cage around the motor pump might be a good idea, to add a little protection for it.

@MuskyFarmer 3 месяца назад

Would love to see a corn rootball dig this summer on the track rows to see if the compaction is too close to the row

@JohnDeere-jw7jf 3 месяца назад

Love it

@chuckfolks2179 3 месяца назад

The best penetrating oil I’ve seen is a 50/50 mix of acetone and atf.

@miner.camp.stoves 3 месяца назад

The Mexican cheek implant finally ran its course. Looking good!

@ashlandgunclub1000 3 месяца назад

Always suspected Chet should be wearing a helmet all the time.😂

@MrTonyharrell 3 месяца назад

You can easily reposition the starter handle on that small Honda. The rope and spring inside are caged and will not come loose.

@coryweber6188 3 месяца назад

Your going to need some mud deflectors now with those wide tracks they will be sling mud everywhere

@svfirefly2702 3 месяца назад

21:53 Chet, if you did want to move the pony pump off the back of the trailer, find a spot on the semi tractor, perhaps on a couple if you use a couple with that trailer, and put a couple of hydraulic ports on the absolute rear end of the trailer. That with a pair of say 30’ lines to connect those rear ports to the pony pump on the semi tractor gets the semi out of the way of the loading zone, and gives you full use of the entire deck of the trailer should you need that at any point.

@dkarre686 3 месяца назад

We have a couple 2 track deeres in 144" track spacing, we carry a 24 row 36" mounted planter with no lift assist, awesome planting setup for us gravity irrigated guys

@gordondonald1955 3 месяца назад

The trailer brakes, you don't have to take the wheels off the hub. It comes off the spindle all in one. Just take the bearing nuts off and outer bearing off. You will need a wheel dolly to do it.

@chrisgeorge2670 3 месяца назад

Great video! Don't forget to change your oil after a short break in period on that small engine. The oil will be black after 30 min.

@jkfishslayer 3 месяца назад

Another awesome video. You can turn the recoil upside down on the, so that it's pulling downward or more of a straight pole with your right arm. Also for about 200 bucks you can have a electric start kit to those.

@jeffsimonar7161 3 месяца назад

Safety glasses when you’re grinding buddy, I just had a piece of steel from a grinder drilled out of my eye,not fun

@nickcollins1528 3 месяца назад

They're gonna get screwed one day when someone gets hurt because of the lack of safety. And it's posted all over the internet

@BigSamBurton 3 месяца назад

Guys guys guys who needs safety glasses when you have safety squints they’re so much easier

@schafn 3 месяца назад

Hearing protection too. I've been wearing hearing aids since I was 50 because of all the tractor operating and shooting I did when I was young. Now I can feel myself getting more deaf just from splitting wood. I have to wear ear muffs for the simplest things. Do it when you're young, boys, and you won't have to listen to constant ringing when you are older.

@DumbOhioFarmboy 3 месяца назад

Add a bump cap to that list

@anthonygoossen5679 3 месяца назад

Safety rules only keep people without brains alive so sad😂

@coloradojaguar1 3 месяца назад

I would look into putting fenders over your axel. Keeps everything cleaner and if you need to load something onto one of the pillers it is easier to stop than to try and stop with out them.

@curtisanderson1830 3 месяца назад

brand spanking new planter. just what to boys wanted

@FuelMan 3 месяца назад

Good Ole inbound brakes. I helped work on those years ago. Pain in the rear.

@derekhazelton3893 3 месяца назад

That’s cool I had to see where in Canada these guys where From and I see it’s rosenort Manitoba they are only a hour and a half away from me that’s very cool to me

@alecfromminnenowhere2089 3 месяца назад

Nice job. What a pain it was to have to take a tractor with you every where.

@phillipdickinson8557 3 месяца назад

Chet Dougo Eric and Broodie great job loved the explanations and thank you all for sharing and your timethe only thing didn't get a good enough explanations from Dougo on the door openers could he go into more detail might be helpful mine is a manuel slid but I could up grade some day

@EricWall 3 месяца назад

Oh and I feel the pain on door opener programming, we bought 4 extra ones for the new shop truck and other equipment. After a friend showed up and made us feel stupid by showing us a learn button we kept missing. We looked at the lower control and up on the motor. I’m sure it’s something simple, it was for us at least.

@mikegleeson349 3 месяца назад

Those trailer rims are technically called Dayton Wheels, laymans terms are sh-t spreader wheels, Budd wheels are much easier (and expensive) to work with. You can rotate the pull starter in any diection you want, the recoil part is separate and contained, I'd rotate it clockwise where the cord pull is at 2 o-clock, pulling level towards the front of the trailer.

@Kwappel2 3 месяца назад

For the garage openers as far as i know there is basically old and new style of radios in them. My vehicles worked fine on my old one but when it failed the new replacement would not work with my old vehicles any longer. I also got some keychain ones for my motorcycle to have so when i was coming home i could reach to my keys and open the door as i was pulling up. There again i had to choose the right remotes for the new motor.

@dutchchenoweth220 3 месяца назад

Hey Chet, if you don't want the small Dayton hubs you should be able to go to a low pro 22.5 hub pilot hub. We done it to a 1970 something step deck with the same size that you have now.

@comeandtravel1 3 месяца назад

You can clock the pull start.

@gailp9432 3 месяца назад

Chet, I think your plasma cutter would eliminate the hair parter….just saying 😊

@gatlin4834 3 месяца назад

Can’t wait for a large frame 2 track they may not be nice on your ground but personally I think the 9530T lookes better than the 9rx spaced all out

@fireguymel 3 месяца назад

Those porta powers are handy to have around

@fredericdelage1542 3 месяца назад

Magnifique démontage des chenille et les cale 9520 large 😂😮😅😊

@EddieTheGrouch 3 месяца назад

Doug should make sure he has the correct series door transmitters for the opener. We had the same issue and drove us crazy for a bit. Needed 1 revision higher to work when the control board was replaced after a lightning strike.

@sallydunbar1683 3 месяца назад

Dougo and the struggle bus!

@Adventures_with_Josh 3 месяца назад

Awesome job on the trailer boy, might wanna build a steel frame around motor just incase it gets wacked.

@apostlepaulvining5688 3 месяца назад

Hey Larson farms Rev. Paul, Eustis Florida. If you spread some yellow corn meal down before removing the tracks on concrete floors and spread more replacing tracks save time plus safer.

@chrismarsh9978 3 месяца назад

Forget the Hub Oil Get the Grease !!! You Will Love it !!!

@jaylewis9750 3 месяца назад

Check the batteries on the remotes

@colinkulasik1128 3 месяца назад

Chet, about those hyd hoses in the trailer and zip ties, you should put some sheathing at the zip tie because over time the zip tie will cut through the hose.

@Deadeye-zr2kb 3 месяца назад

Glad to see everything went well on the pump install and I feel for you Dougo they dont give you enough info sometimes

@theda850two 3 месяца назад

Good video! Now here's some great advice, grab a few of your favorite 5 gallon gasoline cans, and go to a small local airport and buy aviation gasoline, use that for all your small engines on the farm, such as this hydraulic pump engine sprayer transfer engines etc That aviation gas just doesn't go bad fast like gas station type pump gas does.

@firstname6208 3 месяца назад

Wheel seals, drums, brake shoes, bearings, tires. In the fall dougo will trade the old girl for an rgn and be done with the old crap. Those hubs are dayton and the lugs are shovel lugs. When the drums are inside the hubs they are called inboard mounted, when you have a hub pilot wheel and the drums are outside they are called outboard mounted.

@tjtitus8970 3 месяца назад

Why does the wide stance kit not have dowel holes on the outside of the spacer? Typically dowel pins are used to carry some of the load, but now you are just relying on the bolts to hold/take all the force, which is now higher than from the factory due to the track being spaced out.

@lynwessel2471 3 месяца назад

Might be a good idea to run a spiked closing wheel and drag chain next to the tractor tracks.

@danshields3654 3 месяца назад

I do not know if they were just joking with you but they are from Manitoba not very far from Winnipeg is where the head office for Princess Auto Canada's version of Harbor Freight where you can get them I live in Canada and have 4 ton and 10 ton porta power the one I have had over 35 years and know other people that have them also. When I got my first one I thought I would just use it for a couple of things I was surprised all the jobs that that I found uses for it.

@hawks2252 3 месяца назад

I'll trade ya the Wild for the Jets. I'll throw in a first round draft as well.

@danshields3654 3 месяца назад

What does that got to do with the video also would not care much about that trade do not live near Winnipeg. @@hawks2252

@stevehammond7485 3 месяца назад

Love everything you do! But I'm pretty sure you want to build some sort of steel cage around that little motor/pump. The first time it gets tapped it will be a goner. Of course the cage won't save it from a big mistake. After a long day, it will happen! But it is a great idea adding the pump to the trailer.