Gameboy Color Sound Fix - Volume Wheel Replacement | Gameboy

Подписаться 1,8 тыс.

Просмотров 6 тыс.

50% 1

Gameboy Color Sound Fix - Volume Wheel Replacement | Gameboy
Total Fix
Gameboy Color Sound Fix - In this video I show the steps that are required to troubleshoot and fix a Gameboy Color experiencing sound issues. In my case, this Gameboy Color had crackling noises as you would turn the wheel up and down. Let see if we can fix it! If you are interested, please feel free to subscribe as I release weekly content.
Tools Used:
Rust Remover (Affiliate Link): amzn.to/3AKpzwA
Brushes (Affiliate Link): amzn.to/3KOijEj
iFixit Toolkit (Affiliate Link): amzn.to/3KOiuiX
Electronics Air Duster (Affiliate Link): amzn.to/3CVCrCw
Canned Electronics Air Duster (Affiliate Link): amzn.to/3B8TnEq
Multimeter - Cheaper Option (Affiliate Link): amzn.to/3Ri07pd
Multimeter - In Newer Videos (Affiliate Link): amzn.to/3elpnfI
Multimeter Leads (Affiliate Link): amzn.to/3AKq0He
HARDK Hook and Pick Set (Affiliate Link): amzn.to/3KLMsEb
Soldering Equipment:
Soldering Mat - Older Videos (Affiliate Link): amzn.to/3BcMOkk
Soldering Mat - Newer Videos (Affiliate Link): amzn.to/3wTtTbw
99% IPA (Affiliate Link): amzn.to/3CWrqAQ
Hakko FX888D Soldering Station (Affiliate Link): amzn.to/3QfqISt
Hakko Desoldering Tool (Affiliate Link): amzn.to/3AQA6X7
Solder Tip Cleaner (Affiliate Link): amzn.to/3RCBdAr
Fume Extractor (Affiliate Link): amzn.to/3Riu744
Solder Roll (Affiliate Link): amzn.to/3TJb0C7
Flux (Affiliate Link): amzn.to/3emEiWU
Hot Air Station Equipment:
Quick 861DW 1000W Digital Rework Station with LCD Display: amzn.to/3DYRnP8
AFFILIATE DISCLOSURE:
This video and description contains affiliate links. If you click on one of the product links, I’ll receive a small commission. I won't put anything here that I haven't verified and/or personally used myself.
Warning:
This channel is not liability for anyone attempting to perform self-repairs. This channel is meant for the purpose of guiding and assisting those that may be experiencing technical difficulties with their systems. All equipment and products are handled with safety first in mind. Anyone who is inexperienced handling certain equipment or chemicals should refer to the user manual for their respective product and ensure that all proper safety measurements are performed.
Thanks for Watching and please don't forget to LIKE THIS VIDEO, SHARE AND SUBSCRIBE FOR MORE!
#colorsound #fixcolorsound #volumewheel #replacement #gameboy

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@kmjcollects Год назад

I've been looking everywhere to try and find a solution for my problem with volume! I changed speakers, capacitors, potentiometer, and even the jack port. By watching your video I realized that I ripped the pad underneath the potentiometer, on the same pad you ripped. Thanks for the video! Where did you purchase those copper pads in that packet?

@totalfix877 Год назад

I apologize for getting back so late to this, I have been busy. However to answer your question, I got it from NorthRidgeFix. I will link the product below here: northridgefix.com/product/pad-strips-to-fix-ripped-pads-and-torn-wire-traces/

@kmjcollects Год назад

@@totalfix877 thank you!

@philhalo66 Год назад

this is the fear i have, the odd part is the bottom isnt even soldered so why is it tearing off?

@FuriousTortoise Год назад

@@totalfix877 I came here to ask that too. What is it even soldered to? Is it just a pressure based contact that cold welds over time or something?

@ferdc2916 Год назад

Thanks for sharing. I will have to do the same with my gbc. Where did you get volume control? And where can I get those small trace pads, that you used to fix the ripped pad? Cheers.

@totalfix877 Год назад

Trace pads can be found at NorthRidgeFix website found here: northridgefix.com/product/pad-strips-to-fix-ripped-pads-and-torn-wire-traces/ The volume control can be purchased from a lot of places honestly, but I go with Console5 just because I get them in quickly: console5.com/store/replacement-game-boy-color-and-game-boy-advance-volume-potentiometer-volume-control-knob.html Just be mindful that on the volume wheel replacement, "If using this product in a GBA, you will need to solder pins 2 and 3 together and pins 4 and 5 together". Source (Under Notes): handheldlegend.com/products/game-boy-color-advance-volume-potentiometer?_pos=1&_sid=6273ab0bd&_ss=r

@Shooter_POS_Mcgavin Год назад

I've replaced the speaker on one of my gameboys thinking the lack of sound was the speaker but still nothing. I checked to see if I was getting continuity in the headphone jack and it did so im thinking its the capacitor? Idk but its driving me crazy already.

@totalfix877 Год назад

Sorry for getting back so late on this, hopefully you have been able to fix it. To go into a bit more detail, most of the issues that I run into when fixing speaker related issues always have to do with the caps or the potentiometer on the wheel having a high resistance causing the volume to be low or absent. You would need a multimeter and inject voltage with some batteries to determine if the proper voltage is being received at the potentiometer.

@SpartanDara 8 месяцев назад

I had a super funky problem with my GBC that this fixed as well! All I had to do was clean it with IPA, and I went in with a toothbrush to try and clean as much as I could. My volume would go up normally until the very last bit, where it would suddenly go down a little on speaker. With headphones, the volume would ramp normally but at max volume, the right channel would cut out entirely. I'm assuming the volume pot would just not be forwarding the right channel to the speaker/headphone downstream when at max volume. IPA and some elbow grease worked great tho!

@RetroC00L Год назад

Thanks for sharing this! I had a very low sound on my gameboy color so like you I changed the volume wheel and the speaker but after that the sound was out of order, the wheel at the minimum, the sound came out quite loud and at the maximum even louder but I can't mute now, any idea?

@totalfix877 Год назад

On the volume wheel replacements, there is a common bridge you have to create for the GBA's with replacement potentiometers. As per most common replacements: If using this product in a GBA, you will need to solder pins 2 and 3 together and pins 4 and 5 together Reference: handheldlegend.com/products/game-boy-color-advance-volume-potentiometer Hopefully this helps

@RetroC00L Год назад

@@totalfix877 already fixed with an other sound wheel Thanks !

@b3nner Год назад

What's the best away to avoid ripping those 2 pads that are below the wheel? It seems like there is no way to properly desolder them.

@thesocker7920 8 месяцев назад

Do you use flux?

@thereaIdeal Месяц назад

I don’t think there was any sound coming out from the Gameboy after you fixed it lol

@MRHYDE3891 Год назад

My volume wheel is like tuning an old radio trying to find a spot with clear sound so I’m guessing it’s the volume wheel needs replacing. Wish I was better at soldering. Bit worried I’m gonna break it!

@totalfix877 Год назад

The GBA volume wheels are a bit tricky, but not too bad after you have a bit of experience. There are alternative ways to make it easier to remove, but it would require cutting up the component.

@MRHYDE3891 Год назад

I did it a couple of days ago. I’d just replaced the capacitors, so was feeling confident. The volume wheel was much harder. I managed to do it though and was surprised to find that it worked! I thought I’d broken it for sure! Sounds great now. Very happy. Thanks for replying and for the video.

@ReMindddd 2 года назад

Hey i recently got a GBC and it has no sound, any idea how i can tell if the issue's from the volume wheel or is it from the speaker?

@totalfix877 2 года назад

You can plug in your headphones and test the volume wheel. Sometimes the speakers don’t work even when testing the resistance of the speaker with a multimeter. Hope that helps!

@Astral_Drago 11 месяцев назад

Even after removing all the solder the wheel won’t budge.

@miguelaulet9425 11 месяцев назад

Hot Air is your best bet

@linvol20 Год назад

Do you have a video removing the volume wheel on the classic dmg gameboy

@totalfix877 Год назад

I do not unfortunately 😬

@linvol20 Год назад

@@totalfix877 took me awhile being careful with soldering ribbon.

@MajinGouken Год назад

Would I be able to use that same repair method on a Capacitor Pad? I accidentally ripped one off

@totalfix877 Год назад

Yup! As long as you are able to create the connection to the existing trace, you can certainly repair a ripped pad that way even for a capacitor!

@MajinGouken Год назад

@@totalfix877 ok thnx! Also how would you desolder the potentiometer from those pads without ripping them??

@jacobjohnson2948 Год назад

my gameboy advance sounds crackly while i move the volume up and down. Max volume is lower than about 75%. I’ve tried cleaning it. should this be my next step?

@totalfix877 Год назад

Have you tried inspecting the speaker to make sure that everything is fine? A lot of the ones I have worked on were defective from my experience and it may be the problem. I would suggest giving it a quick look first before going this route.

@jasonk4189 2 года назад

Do you know if Gameboy pocket Volume wheels are compatible with installing them on the Gameboy Advance?

@totalfix877 2 года назад

I don’t know if you can to be honest I’ve never tried it myself, but in the case you do you’d have to solder pins 2 and 3 together as well as pins 4 and 5 together. I’d just be careful and get the proper parts, they’re fairly cheap.

@kmjcollects Год назад

I know the replacement wheel for this actually works for the contrast wheel on the pocket, but I haven't tried for the gba