Garage Floor Prep - CONCRETE GRINDING DIY using the Pioneer Eclipse rental from Home Depot

Подписаться 33 тыс.

Просмотров 280 тыс.

50% 1

This video shows you how to prep a garage floor for a sealant such as epoxy or urethane. I rented the Pioneer Eclipse machine and the "Concrete Prep Tool", each part is a separate rental. Total cost was $170 for 24 hours. It was the same cost for 4 hours, so make sure to get it for 24 because you WILL need it!
3M Reusable Respirator: amzn.to/3y3oBYP
Filters for Grinding: amzn.to/3mfXjMA
Filters for Sealing: amzn.to/2W8AO1i
Mop: amzn.to/3szOL4d
Ear Plugs: amzn.to/37YcUb4
Full Garage Build Playlist: • Garage Build
If you want to buy an "I AM THE WARRANTY" shirt OR if this saved you a good deal of time and/or money and want to buy me a coffee or a beer, you can do those things right here: ko-fi.com/helpmediy
Join this channel to get access to perks:
/ @helpmediy
Diamond Donors:
Luis Alvarenga
Rio Toro - Visit them at www.riotoro.com
Windshield Wow - Visit them at www.windshieldwow.com
--------------------------------------------------
Disclaimers
Help Me DIY is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
This video description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
I am a Do It Yourself, also known as DIY, mechanic. I am NOT a professional mechanic. I do not have any formal training in the automotive field.
Help Me DIY assumes no liability for anything you choose to do to your car, before, or after watching one of my videos or utilizing the content from this web site.
All DIY repairs or modifications you perform to your car are made at your own risk. Sometimes, even if you've done everything the right way, you can destroy or damage one or more things on your car. You must understand this, but by leveraging knowledge and patience, the probability of encountering one or more problems can be reduced.
Also, if for some unfortunate reason, I do give incorrect instructions and something breaks because you followed my instructions, I will NOT reimburse or pay in any way for whatever cost that may be incurred due to following my wrong instructions.
Lastly, please don't do anything to your car unless you yourself feel comfortable and confident in doing so.

Авто/Мото

Опубликовано:

19 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 258

@dondunning1307 Год назад

Wow, this is the best video I have seen on this tool. Two years ago I did this to a 2000 square foot house (3 full weekends of 10+ hour days grinding).... there was not a lot out there on this tool other then HD and factory stuff. You did a great job and showed the realities of using this machine. I have to think you have used a buffer before.. the learning curve to handle the machine was a little harder for me. Do not do the water method that he mentions.... I did that in one hallway and it created an insane mess. I do suggest running a light mop ahead of this to keep some of the dust down. Do not go crazy with water! A light mop only.

@HelpMeDIY Год назад

+Don Dunning thanks! And no, I’ve actually never used a buffer either 😬

@JRODD666 Год назад

Agreed. Was told to wet and became a nightmare. Do dry folks and work right to left

@HelpMeDIY Год назад

@@JRODD666 thanks for the info!

@brianalexander4139 8 месяцев назад

Great video! I rented the same concrete grinder and grinded down the floor. The grinder has a pretty good amount of power so I agree with starting in the middle of the floor to learn how to use it. My pattern was to slide it left to right, right to left, and the vertical ovals. Lots of dust and swept throughout the process and after finishing. Then used a shopvac to collect the remaining dust. Pressure washed the floor to clean all dust. Don't forget to get a good respirator, safety glasses, and coveralls so you don't get your clothes super dirty. Now I'm ready for cleaning & degreasing, if needed, and then etching.

@HelpMeDIY 8 месяцев назад

+Brian Alexander thanks! 🍻

@73amx63 6 месяцев назад

Home Depot folk gave you good information. The thing is a beast. Best to let it find its own plane or its own comfortable operating position. It can turn easily. I wanted to remove paint overspray so bought a red pad and some 60 grit paper. Worked well

@HelpMeDIY 6 месяцев назад

+73 AMX yes! 🍻

@jimmccarthy6015 2 года назад

The space is looking great!

@HelpMeDIY 2 года назад

+Jim McCarthy thanks! It should start picking up a lot more over the next couple weeks 😁

@BalcomFamily 3 месяца назад

Was at Wicked Weed brewery in Asheville this past weekend, good pours there. This vid will help me and the wife as we're tasked with doing our 3 car garage later this this spring. I see some do's and don'ts from this so thanks for taking the time to post.

@HelpMeDIY 3 месяца назад

+@BalcomFamily you’re welcome! We like Wicked Weed too

@Jay-bu6cd Год назад

Thank you that helps me make my decision regarding doing this myself

@HelpMeDIY Год назад

+Jay you’re welcome! 🍻

@thomashermann4228 Год назад

Thank-you for this video!

@HelpMeDIY Год назад

+Thomas Hermann you’re welcome! 🍻

@budmanzoom4441 Месяц назад

Thanks for sharing that!

@HelpMeDIY Месяц назад

+@budmanzoom4441 you bet! 🍻

@bradymiguel 2 года назад

For anyone doing this, I’d recommend getting the premium “fine dust” filter as well as the adding the collection bag that you can put inside the canister. I do this for woodworking and general maker stuff. For a few extra bucks, your shop vac won’t even know it’s within inches of dying.💨

@HelpMeDIY 2 года назад

+Brady Barrera I agree, assuming they have it available 😁

@ledi2005 Год назад

Yes, a collection bag saved me while skimming walls. No dust at all and it saves the motor too. Best investment ever.

@robertocarlosampuero7579 27 дней назад

Good job bro, thanks for your video, now I can paint my garage... 🤩🍻😎

@HelpMeDIY 27 дней назад

+@robertocarlosampuero7579 glad to help! 🍻

@shawnwalker-ir1qk Месяц назад

Helpful hint when using the orbital sander disk . Use playground sand to help cut into the concrete

@HelpMeDIY Месяц назад

+@shawnwalker-ir1qk interesting… first time I’ve heard that 🍻

@watahyahknow 9 месяцев назад

small tip i learned from running a floorbuffer (basicly the same machine) put the extention cord over youre shoulder and make sure you move away from where the extention cord is comming from (allways pull on it , never let the machine move toward it , if it catches under the scrubber it will tear the cord a part

@HelpMeDIY 9 месяцев назад

+watahyahknow good tip, thanks!

@rvscootin3457 9 месяцев назад

Great Video! I think the main idea is to give the floor some "tooth" to let the other chemicals adhere to. I think that if you have CSP-2 ground quality that the concrete will be ready.

@HelpMeDIY 9 месяцев назад

+RV Scootin thanks! 🍻

@rickmonster636 Год назад

Doing some concrete prep now and this video showed me what to expect with the buffer rental . Good stuff

@HelpMeDIY Год назад

+Rick Monster636 good luck! 👍

@Scott-nj9gq 5 месяцев назад

I just emailed the epoxy company that quoted me last year...no shot I'm taking this project on. Great video!.

@HelpMeDIY 5 месяцев назад

+@Scott-nj9gq 😎😉

@travislau808 Год назад

I just rented one of these babies thanks for posting this video

@HelpMeDIY Год назад

+Travis Lau you’re welcome. How did it go for you?

@travislau808 Год назад

@@HelpMeDIY it went very well!

@HelpMeDIY Год назад

@@travislau808 that’s great!

@ShellieSager Год назад

Okay! You convinced me. I'm hiring someone. lol

@HelpMeDIY Год назад

+Shellie Sager hahaha very valid decision!

@CoderMan Год назад

Great overview. Hasn't seen anyone with the same watch band before ///M

@HelpMeDIY Год назад

+Coderman 🍻///M

@trailjockeytj6160 2 месяца назад

To get more power out of that unit, you had an interesting technique that works limited. It’s better to lower the handle and put it into your hip while twisting the handlebars, pulling up on your left and pushing down on your right, it will get the right hand of the machine cutting like what you’re doing with the backside of the machine but continuously, you just have to lean into the machine, and that gives more weight on the cutting surface, or at least makes the cutting surface smaller, giving you more weight on that section. I am a professional flooring, guy, and polish floors, quite a bit the first house of a garage like that would take about an hour with our machine, 25 hp grinder with a 7 hp vacuum all 480 V three phase. And finally your shot back will handle all that dust on your final cleanup. It’s just you would have to shut down and clean the filter quite a bit which is a safer way as far as breathing hazardous dust but you did have your respirator on so then you just have to worry about the best going where you don’t want it like into the rafters and so forth

@HelpMeDIY 2 месяца назад

+@trailjockeytj6160 makes sense

@deep6301 11 месяцев назад

Very good tutorial. Thanks

@HelpMeDIY 11 месяцев назад

+Dee P I appreciate that thanks! 🍻

@francoisparadis5184 3 месяца назад

Next time use "dustbane"...I think it's "sweepy" or something here at Home Depot. (very small wood chips with an oil...You put it down and the oily chips pick up the dust as you sweep, so nothing comes up. It also works for drywall dust....It's simply amazing. You would not even need a bag of it for your project a little picks up a lot of dust.

@HelpMeDIY 3 месяца назад

+@francoisparadis5184 interesting 🤔

@donaldschulte2463 2 года назад

Probly should of had a little water on the ground because the blades glaze after a certain temp

@0dallas 2 года назад

now that you're an expert, come do my shop! :P

@HelpMeDIY 2 года назад

+Shawn D you can’t afford me. Man…. That ranks right up there with roofing! 😭

@stevodakine1 4 месяца назад

You're a hard worker, I would have grabbed two dudes from the Home Depot parking lot and paid them to do all that. Then I would have bought them that beer!

@HelpMeDIY 4 месяца назад

+@stevodakine1 😂🍻

@t-shirtdudes212 2 года назад

Great video. Did you have any issues keeping the floor straight? I want to do mine but am worried about creating waves in the floor.

@HelpMeDIY 2 года назад

+T-Shirt Dudes nope, not at all. Doesn’t remove enough material to affect that.

@mikerandolph4057 2 года назад

I agree, lower is way better control.

@HelpMeDIY 2 года назад

+mike randolph 👍

@pnum9618 2 года назад

lower the handle below waste u will have more control c15 flooring contractor

@HelpMeDIY 2 года назад

+p num yes! I meant to mention that in the video… the lower the handle the more control I had. Thanks for pointing that out!

@justinjr1623 Месяц назад

wow, feeling like you on the horse back🤪🤪

@HelpMeDIY Месяц назад

+@justinjr1623 yea! 😂

@dgmenace73 Год назад

Nice video & it has helped me to think I can do this to my garage. My apologies if people have already asked or if I missed it in the video. How much did Home Depot charge to rent the grinder out to you? I really appreciate your honesty of the use and trial & error with this. Thanks again.

@HelpMeDIY Год назад

+Dennis Griffith glad it helped! I probably mentioned it, but I don’t remember now. You can call a HD and ask though.

@jiajia4856 Год назад

He said $170.

@fabienpics 6 месяцев назад

Good job.. for better control it is easy when the arm control are lower thand you use. I work a lot with this kind of crinder. And we're easy ( one hand control ) when you take that lower. But anyway, good job

@HelpMeDIY 6 месяцев назад

+@fabienpics thanks! 🍻

@gtoddwilliams Месяц назад

Great vid! Why not pressure wash the concrete after brooming? That would certainly help remove dust.

@HelpMeDIY Месяц назад

+@gtoddwilliams you definitely could… I explained that I had to paint a few hours later and wouldn’t have time for the water to dry, so that’s the only reason I didn’t.

@screwdriver7507 Год назад

The right tool for this job is the 10” concrete grinder that Home Depot rents. It’s a very heavy machine, almost 200 lbs, so getting it home can be a chore. I had to rent a small garden trailer that had a ramp/tailgate. But getting it home was definitely worth it! At least 2X more effective as the floor buffer setup. Also it was MUCH easier to control.

@HelpMeDIY Год назад

+ScrewDriver750 sounds so much better… this was all my HD had

@Obababoy Год назад

Does that tool handle pitting as well?

@tylersGBO Год назад

Am I supposed to put a disc on it? Or use what’s on the machine

@CassieSnowLV 7 месяцев назад

I just rented this, I agree its the better tool for the job (or so it seems from my research) However, I didnt realize how heavy it was. I am picking it up later today and only have an SUV. Wish me luck otherwise will need to reschedule and figure out plan B hah

@fortyoddyears5295 Год назад

So if your patching first and want to use dye in the end, is it better to patch with concrete, leveler, enamel…. What will show least after grinding.

@HelpMeDIY Год назад

+FortyOdd Years good question but I don’t know. Maybe someone else will chime in.

@johnt13 2 года назад

I am putting in a bathroom in an area of my basement that has a concrete floor with all kinds of bumps, old epoxy and a spot where the original oil tank for the heater resided. This was a great video and I am tiling the bathroom area where the reminding 200 sf will be cork with a heavy pad. So my question is does this get the floor to a point where I can lay thinset and tile over it? Or will I still need to use leveling cement which I may just do instead of grinding.

@HelpMeDIY 2 года назад

+John Talbot good question. Mine was already level, obviously, so I didn’t have to worry about that. I wouldn’t think this machine would be good at leveling

@Pelavitafan 2 года назад

True diamond grinding will accomplish that. Unless the floor is insanely jacked up...Home Depot machines like the Dimabrush diamond head don't really hone down high spots.

@Pelavitafan 2 года назад

@@HelpMeDIY it's terrible at leveling. A Scanmaskin or Edco with 18 to 30 grit segments and a HEPA vacuum will do that fast and perfect .

@HelpMeDIY 2 года назад

@@Pelavitafan I would think so too, but I wasn’t leveling anything

@jayjaber8834 Год назад

Rule one for dust extraction never use a leaf blower because dust settles, rule number 2 never use a broom because once again it creates dust, use a foam squeegee instead. If you have only fine dust no rocks or debris a squeegee work’s beautiful if you do have rocks and debris from grinding lightly broom then squeegee

@daveschinkel7789 Год назад

Something doesn’t seem right with the same one I got from Home Depot. It’s very hard to stop the machine. The handles don’t have any tension so when I let go or let off a bit the machine doesn’t stop. Is that the same feeling you had or did yours stop when you let off the triggers?

@HelpMeDIY Год назад

+Dave Schinkel hmm not sure about that

@derekhudgin6660 8 месяцев назад

Does a concrete grinder like this help grind down bumps or lips on existing concrete floor?

@HelpMeDIY 8 месяцев назад

+Derek Hudgin if they weren’t too big it would

@D-blaze Год назад

To anyone wondering this machine/method needs water or the diamond blades will heat up and glaze over. Understandably, he stated he couldn't use water due to a time constraint.

@HelpMeDIY Год назад

+Dallas Blaze yes, and thank you for actually listening 🍻

@D-blaze Год назад

@@HelpMeDIY Cheers! Thank you for taking the time to help others, including myself.

@jiajia4856 Год назад

So if there is no time constraints, would you do this differently?

@andresruiz6033 Год назад

I'm trying to remove old paint from my basement concrete floor that is chipping away due to a flooding. Do you know if this tool will remove all of the old paint from the floor?

@HelpMeDIY Год назад

+Andres Ruiz I think it should. You could call them to confirm

@ssdtrain1 8 месяцев назад

When done grinding, vacuum floor check vacuum filter every 5-10 minutes. empty then repeat process. Wet mop, (not moist mop) with a large head (not a kitchen swiffer mop) but a commercial size and bucket from Home D. to pick up the rest of the surface dust from the concrete. Don't scrub the mop, go back and forth turning the mop on your return swipe, "scrubbing" works the dust back into the floor. And try not to pressure wash unless oil stains are present.. Have fun !!

@snivvelslurderagementai2560 2 месяца назад

Thanks. My question is does this machine create a smooth finish? I don't want to put epoxy on. I just want to seal the concrete with a clear coat.

@HelpMeDIY 2 месяца назад

+@snivvelslurderagementai2560 should be good for that I would think 🤷‍♂️

@srkidd12 Год назад

What about removing the top inch or 2 to redo the surface? I ran out of time stamping and was thinking of using this to remove the top 1 to 2 inches and resurface it with a bonding agent. Thoughts?

@HelpMeDIY Год назад

+SR Kidd12 not with this tool! No no no. 😂 it would take you a week

@dp981 Год назад

You might as well go at it with a sledgehammer and repour the slab if you're looking for 1-2 inches down. Diamond grinding removes maybe a millimeter or two from the surface in a thorough pass.

@srkidd12 Год назад

@@dp981 good point. I realized that after I hit send. 😅

@thombauer1721 2 года назад

Good video. Wear a filter or respirator suitable for concrete, to protect your lungs. Silicosis is nasty stuff you don’t want it.

@HelpMeDIY 2 года назад

+Thom Bauer absolutely!

@token6282 3 месяца назад

Hello all.... ive been a Floor technician for 6 years now (strip and wax floors).. but recently ive been trying to find a career path that pays more.. Ive never realized how similar this machince is to the buffer i use. I feel like i could do this with my eyes closed, with one arm. LITERALLY!!!! Is it that really that similar to a floor buffer or is it much more intense? Could this be a could carrer for me to advance to? What would the job tilte be????

@HelpMeDIY 3 месяца назад

+@token6282 I’ve never used a buffer so 🤷‍♂️

@legalpundit22 Год назад

Pouring water and sweeping the dust off is one economic and quicker way, than using vacuum cleaners

@HelpMeDIY Год назад

+भारतीय yes, as I said through, I didn’t have time to wait for it so dry

@Hathathorne 10 месяцев назад

Can I wet the ground so the dust doesn't kick when I grind? Would it be better? like a whetstone?

@HelpMeDIY 10 месяцев назад

+Lewis some people do, but I hear it can also make a big mess and be hard to clean up

@Hathathorne 10 месяцев назад

@@HelpMeDIY Yea, I did some initial scrubbing and degreaser with a deck scrubber and its basically leaves a thick black sludge. You'd need a strong wet vacuum to get it all up. I have a squeegee and a okay shop vacuum though so it'll probably work out.

@johnm8078 Год назад

Will this machine grind any humps or high spots or is this just basically sanding the floor?

@HelpMeDIY Год назад

+John M not much. Mostly just roughs it up

@g.b.5206 3 месяца назад

they have a heavy duty grinder at Home Depot rental

@joespear915 10 месяцев назад

To keep the wheel cool, you should keep the area wet. Thtas how we do it anywAY.

@HelpMeDIY 9 месяцев назад

+Joe Spear yeah some people like that approach

@okcool4128 3 месяца назад

Question, your machine seems a little bit worn out, old, but would pressure washing + grinder work better?

@HelpMeDIY 3 месяца назад

+@okcool4128 some people here say yes and some say it makes more of a mess 🤷‍♂️

@PossessedbyPhoenix 3 месяца назад

Is there a way to get the corners?

@HelpMeDIY 3 месяца назад

+@PossessedbyPhoenix not with a circle, but that’s overkill

@trailjockeytj6160 2 месяца назад

Also, a better way to scuff the surface is a shot blast. I thought you were going to try to polish this floor which is what we do when we grind. We will use eight different grades of grinding pucks Starting at 18 ending at 800. A really good look for a garage but way too much work for 110 V. If it took you 10 hours to do the first grind, which wasn’t sufficient For an initial grind for polish, by the way, you would’ve been there for weeks! Painting a floor to me, is not the way to go, I assume you’ll end up getting stains from your tires sitting on the coating, and hopefully you got enough prep to keep your hot tire from just peeling off the coating after that tire cools and backs back out of the garage. But you did go pretty far to get a good profile. I’d be curious to see what the grip of your grinding disc was.

@HelpMeDIY 2 месяца назад

+@trailjockeytj6160 I didn’t use paint, the coating I used is marine grade and has been perfect for tires, chemical spills, etc. extremely durable and easy to clean.

@marklevenson 7 месяцев назад

in the future just drop your handle closer to the floor and let the weight of the sander do the work you want it to float across the floor not wobble raising it forward will cause it to bite when needed

@HelpMeDIY 7 месяцев назад

+mark levenson yes great tip thanks

@lovelykary79 Год назад

Will this remove old paint on concrete?

@HelpMeDIY Год назад

It’s supposed to, but I obviously didn’t use it for that so I can’t confirm

@TheHighVindicator Год назад

You really wanna put the handle lower. Pocket height and lean into it with your upper thigh. I did wood floors for a long time and have buffed football fields worth of floors.

@HelpMeDIY Год назад

+Vindie makes sense.

@frankvogel1403 17 дней назад

Fan in the window, suck out the dust boss 👍

@HelpMeDIY 17 дней назад

+@frankvogel1403 good idea 👍 🍻

@paige7930 Год назад

What is the name of that one you rented ? Thanks in advance

@HelpMeDIY Год назад

+Paige thought I put it in the video. Only one my HD rented. Sorry don’t remember without going back to look

@deboraharmstrong3011 4 месяца назад

Lower the handle to your belt line or slightly lower . It will make the job MUCH EASIER!

@HelpMeDIY 4 месяца назад

+@deboraharmstrong3011 yes I’ve heard, thanks! 🍻

@80volwerine Год назад

Hi. How much did you manage to take off the floor? Mm or cm

@HelpMeDIY Год назад

+80volwerine my only goal was to rough it up so paint would adhere to it

@80volwerine Год назад

@@HelpMeDIY I would be interested to grind 30 mm or so. More than an inch. I wonder what could I get for that.

@HelpMeDIY Год назад

@@80volwerine not this 😆

@williamcardenasgarcia5932 5 месяцев назад

So what your saying is to instead of etching to grind instead?

@HelpMeDIY 5 месяцев назад

+@williamcardenasgarcia5932 just another option

@lageronimo8012 Год назад

What are you grinding off? Paint?

@HelpMeDIY Год назад

+LA Geronimo no, just roughing up a new concrete surface so paint will adhere.

@johndoe-nf2le Год назад

Would be faster and easier just to Shotblast the floor, just saying since I own a epoxy flooring company. Stan Houston rents them out for about 300 a day

@HelpMeDIY Год назад

+john doe I’m all for faster and easier!

@alexkomala 2 года назад

Would you recommend doing this on a 2400 sq ft shop?

@HelpMeDIY 2 года назад

+Alex Komala I think it’s necessary and will give you the best final results, but I sure wouldn’t want to do it myself!

@alexkomala 2 года назад

@@HelpMeDIY thanks for the reply. Epoxy came in after 4 month back order now it’s too cold to lay. Time will tell what I end up having to do!

@HelpMeDIY 2 года назад

@@alexkomala yeah it’s crazy how hard it is to get paint/etc these days!

@typhoonjenkins8330 Год назад

Just watched this. Decision made, I'm hiring the pro's to do mine. I'm too old and couldn't possibly do all that work, which sucks. It is what it is

@HelpMeDIY Год назад

+Typhoon Jenkins better to know before you get into it 😁👍

@Toofastfourluv Год назад

A laser level to determine your effectiveness

@HelpMeDIY Год назад

+Dedra Skipworth perhaps. Although just visually seeing it scuffed up was all I needed to know that my paint would stick

@rfwoolf Год назад

Problem: I think this is a concrete scraper not a grinder. It's good to remove paint and coatings on the concrete, but not good for remove the top layers of concrete 'crema' to expose the aggregate, which some applications require.

@HelpMeDIY Год назад

It’s their grinder attachment

@screwdriver7507 Год назад

I’m experiencing the same hours long struggle as “Help me DIY”. I’m now going to try the Home Depot 9” grinder (much heavier machine) vs the 17” concrete prep tool (mounted on a floor polisher) to finish the OTHER HALF of my garage floor. 🙄

@HelpMeDIY Год назад

@@screwdriver7507 let us know the comparison!

@screwdriver7507 Год назад

@@HelpMeDIY Will do.

@VICMANROQ Год назад

@@screwdriver7507 how'd it go. I'm about to jump into this situation

@maxromero7998 Год назад

Great video but rhat concrete is way to hard to cut that surface. Mine is not that hard troweled. Might just get a real concrete grind thanks for the video

@HelpMeDIY Год назад

+Max Romero thanks! 🍻

@Pelavitafan 2 года назад

This is a new pour, cured 30 days, right? If so, use a floor maintainer/polisher RS16 with a 60 grit sanding screen underlaid by a black pad as a backer pad. All of this is at home Depot Tool Rental. This technique produces a better surface for coatings or sealing without curricular grind marks Vacuum up the grind dust grind and microfiber mop with zep NEUTRAL cleaner, 2 times. Rinse thoroughly. Let dry overnight with fans. Coatings cannot be applied on moist floors. Will fail later. Concrete us porous and permeable. Concrete should be coated only when moisture is 10% or less. Get all moisture meter at harbor freight ($10). This saves time, money, and produces a better surface with open pores. I know this from doing oodles of garage floors professionally for 14 years. Another option is call us to do high end diamond grinding with various iterative diamond tool segments for polished concrete, from coarse to fine. We use HEPA vacuums. One note: wet grinding is messy and the rinseate water will leave a mess all down the street! We use a hot tire resistant sealer. Hot tires WILL lift up most coatings and epoxies. GUARANTEED. Polish concrete that are densified and sealed properly---and sometimes stained first, are the most durable. All coatings fail eventually and you'll hv to grind it off. Geological engineer here, most contractors haven't a clue.

@HelpMeDIY 2 года назад

+Michael Oritz yes new pour.

@MrSrt4dodgeneon Год назад

So my tires temperature are what’s causing the paint to come up? My garage has one of those speckled floors that’s got some age to it, but since I’ve been using it more I noticed more bare floor coming through

@HelpMeDIY Год назад

@@MrSrt4dodgeneon most likely yes

@Pelavitafan Год назад

@@MrSrt4dodgeneon yes coatings do that I use the GPD hot tire pickup sealer on top of the coating. If that is not done right away the entire floor has to be stripped grind it off start over... The best floors for a garage are concrete polished floors. You get the exposed concrete which is a thousand times more durable than any coating

@dwhite300 Год назад

Michael - can I ask a quick question? I want to put down New Age composite tiles, which interlock and float on the concrete garage floor. The spec says anything over 3/16" over 10' unevenness is a problem. My floor is 60 years old but the concrete is in good shape and has some valleys of around 3/16 over 4 or 5 feet. Hard to even tell. Anyway HD rents the EDCO grinder which seems like it will flatten everything out moreso than the machine in this video. However, how do you knock down high points? I was going to mark the high spots with a sharpie and then grind as needed. Will this work? Also, the dang thing weighs 150 lbs and I won't be able to get it out of my SUV by myself, so dumb as that sounds it's another problem. Many of my neighbors are old so I don't want to break their backs!

@cgrobe21 Год назад

Looks like homedepot rented you one with a bent spindle...

@catcall569 2 года назад

After watching this video, I might pay to have this done…

@HelpMeDIY 2 года назад

+Daniel Cobb I don’t blame you!

@chrisjefferson264 2 года назад

4 to 5000

@Imwright720 2 года назад

That attachment is really the wrong one. It’s going to sand more than grind. Your really need to get a good GRIND WITH ABOUT A 40 GRIT scratch pattern for the best bond. Certainly anything is better than nothing but I would hate to work so hard and have the finish fail. Maybe the head is just worn out. It’s not how much you grind off but the scratches it creates that matters.

@HelpMeDIY 2 года назад

+Gene Miller well that’s the only one they rent. Maybe it’s worn like you said though.

@charleslee4361 Год назад

I hate replying negative comments. So I wasn’t going to say anything. But you are the only comment that I read that is spot on. And yes I am a flooring guy.

@bobfognozzle 2 года назад

🤓👌

@HelpMeDIY 2 года назад

+Bob Fognozzle 😂🍻

@andrewwilliams9973 Год назад

how big is the garage?

@HelpMeDIY Год назад

+Andrew Williams around 17’ x 36’ if I remember correctly

@andrewwilliams9973 Год назад

@@HelpMeDIY Thanks. I am going to epoxy my garage. It's a new construction with smooth concrete so I know I need to rough it up. If you could have saved time but spent about 2x as much on a shot blaster, would you have done it? My garage is 780 sq. ft. and I am a little intimidated by the time it would take with a floor polisher/diamond wheel. Any thoughts? Just discovered your channel and really like it!

@HelpMeDIY Год назад

@@andrewwilliams9973 I appreciate it! Hmm… possibly. My limiting factor was time… I didn’t start planning early enough to have this done before moving in!

@JohnnyVoidMusic Год назад

Thank the home depo video or the employee did not tell me how to steer this so it throw me 6 feet in to a wall and flipped over.

@HelpMeDIY Год назад

+Johnny void yikes! 😬

@watchyourtonex6989 Год назад

That is 100% a adhesive scraper for getting old adhesive off of concrete it just scrapes the surface you will end up buying that thing if you try to grind concrete with it. Cuz it will take the entire blade to do anything and still wont grind

@HelpMeDIY Год назад

+watchyourTONE x it did what I needed it to do and I didn’t have to buy it so…

@mcanultymichelle 5 месяцев назад

😂❤👍I think I can do it too 🥴

@HelpMeDIY 5 месяцев назад

+@mcanultymichelle you can! 🍻

@jvandyne3124 Год назад

Dude floor gone be fucked up all hopping like a rabbit 🐰 In job corps someone would sit on it when we did the floors lol 😂. You can work that with 1 hand 🖐

@HelpMeDIY Год назад

+j vandyne 😂 luckily it turned out great!

@alvahb2263 11 месяцев назад

They gave u a dina brush lol

@HelpMeDIY 11 месяцев назад

+Alvah B 🤷‍♂️

@TheCureThatKillz 2 года назад

Should have rented an actual concrete grinder instead of a floor sander with a diamond pad.

@HelpMeDIY 2 года назад

+TheCureThatKillz that is the correct machine.

@TheCureThatKillz 2 года назад

@@HelpMeDIY sorry man but it’s not the “correct machine”. I own a concrete coating company and have been in the industry for a very long time. If a floor sander was the correct machine, us professionals would much rather spend $1,500 on a few of those instead of $20K - 50K on actual concrete grinders. You’ll never see professional companies using those to grind concrete, at least you shouldn’t.

@HelpMeDIY 2 года назад

@@TheCureThatKillz well I’m sure there are bigger and better machines to do this, but I just meant that’s the one that Home Depot rents for this task. Thanks for clarifying

@tylersGBO Год назад

@@TheCureThatKillz so trying to smooth out rough concrete, better to use a grinder and appropriate pads for smoothness?

@jiajia4856 Год назад

@@tylersGBO the machine in the video is the one you can rent from HD. You also need to rent the diamabrush from HD. I’m doing research myself. Planning my work on the garage in July.

@jaromc9045 10 месяцев назад

thats not a grinder, its a floor machine. for sanding and buffing

@Greg-Hatman Год назад

😂Hold it against your waist, not with your hands out. It will be much smoother running!

@HelpMeDIY Год назад

+Hatman1974 I did! Hence the bruising 😆

@g.b.5206 3 месяца назад

I tray this with the sanding paper same machine, it was a nightmare, I could not controlled, waste of moneyed the effect is all ugly scratched, the best way is to give a wash finish the next day of the poor to the acid will also di the job, if you are doing to tile it it will be just fine

@HelpMeDIY 3 месяца назад

It works, just takes effort

@sunracer1869 2 года назад

1: to 10 Acid & water ratio with the white scrub pad & push broom with a helper moving water & would have been much better. Advice from hom depot employees is like getting advice from kamala Harris.

@HelpMeDIY 2 года назад

+Capitan Mike 😂

@diehardfan173 Год назад

Laugh out loud, as soon as he said the Home Depot People I was thinking…

@VictorMorales-fh4br Год назад

Proof that the captain is not always that smart

@PhillTheGreat Год назад

100% right. Never take advice from her, I mean them, or it.

@jonathanwilson2767 Год назад

"How can I bring politics into a comment about grinding concrete"

@MrMechanicandy 2 года назад

Well it is definitely not polishing like the machine I have worked on

@HelpMeDIY 2 года назад

+MrMechanicandy polishing? I’m not sure what you mean. It’s a grinder. I was trying to grind and make a rough surface, not polish for a smooth surface

@ExtremeRecluse Год назад

Go get a different grinder that one sucks

@christianschuessler7318 Год назад

First need to know how to operate it without it bouncing like that. You just the handle of the machines in line with your hip and you basically drive the machine with no bounce and you simply controlled the left and right movement with pushing upper down on it at that level takes a little bit to understand, but it should be almost effortless

@HelpMeDIY Год назад

Yeah, I got the hand of it eventually

@EdA-bz3bu 2 года назад

5:40 🤣😂🤣😂. you are convincing me to have a pro do my garage floor with industrial epoxy. What are they about $6/sq. If I ever decide to coat the floor. Currently my garage floor has rough areas and cracking. *Please remember to wear the proper mask no matter how little you think you are inhaling. Silicosis. Your boss(wife) will kick your a$$ if she looks up the dangers. And I will be very sad that something will happen to you, after aaaaall the years I have known you (zero😂).

@HelpMeDIY 2 года назад

+Ed A that would be a very reasonable decision 😆

@dognatious6153 Год назад

Dimabrish recommends water. Blades overheat. Do your research. Also, w water you get a better cut.

@marklevenson 7 месяцев назад

lower your handle some your handle is too high you have to relax and let it ride across the surface doing good for a pilgrim lol

@HelpMeDIY 7 месяцев назад

+mark levenson yes thanks! 🍻

@lordsauto Год назад

Leave the handle loose floating way better.

@HelpMeDIY Год назад

+Rob probably right

@dejanlovro7997 10 месяцев назад

Man you have to look video tutorials 😂😂😂

@craftworker4life314 Год назад

It’s not dust it’s silica

@HelpMeDIY Год назад

+Craftworker4Life fair enough

@daveschinkel7789 Год назад

This thing was a bitch to control when ai tried it

@HelpMeDIY Год назад

+Dave Schinkel 😂 yup

@tddtv Год назад

I found out mine was literally broken. The from home depot needs to be serviced now and the triggers weren't dropping when I let off them so the machine would not stop. Like how the hell do they rent shit that's broken like that. I have the maker of that machine already calling them, that store to make sure they fix the fucking thing so nobody gets hurt down the road

@HelpMeDIY Год назад

@@tddtv wow, glad they are getting it sorted. What a pain

@ericjohnson829 9 месяцев назад

It doesn't seem like this was even a necessary process.

@HelpMeDIY 9 месяцев назад

It was very necessary for the coating to stick and not peel!

@twincanons Год назад

This is not the proper tool to properly grind a prep a floor for epoxy or Poly coatings ,.. ..it does not create a true fresh surface , u need a weighted grinder with at least 80 Grit diamond pads ,..

@HelpMeDIY Год назад

Actually it worked perfectly for my coating.

@glengarbera7367 Год назад

Just a horrible machine. Buy a werkmaster from Canada.

@HelpMeDIY Год назад

+Glen Garbera 😂

@dognatious6153 Год назад

Better grind with a wet grind. I've done over 700 slabs. That eliminates the dust. Home Depot has a wet floor maintainer with a reservoir tank.

@HelpMeDIY Год назад

+DOG NATIOUS I’ve heard that, but I’ve also heard people say it was a huge mess and wished they hadn’t.

@JohnBoysGold Год назад

If I'm doing a garage thats 10 years old and just need to get off the old carpet glue and prep for GPD hot tire do I need a grinder or can I use a maintainer with pearl, flap, sanding screen progression? I saw your other comment about the sanding screens but afraid they will get worn down in seconds on concrete.

@dognatious6153 Год назад

All concrete slabs are uneven with high spots and low spots. Orbital grinder will hit the high spots and leave the low spots. No contractor in the world can create a perfectly even surface.