Garage Makeover ! Updating & Improving The Shop And Workbench Area : Paint, Backsplash, Storage

Подписаться 77 тыс.

Просмотров 53 тыс.

50% 1

I'm back! In this episode, I've gotten myself into a garage renovation or remodeling project. It started out as a simple little project idea and wound up being a major undertaking. Tune in and watch me transform the workbench and much of the garage!
✅Tip Jar (Did this video help or entertain you?)✅
paypal.me/49ccscoot
Thanks for watching! Don't forget to LIKE and SUBSCRIBE!
Tools & Supplies (Affiliate Links)
----------------------------------
Plastic Razor Scraper : amzn.to/3wy791x
Orbital Sander : amzn.to/3iQHpWd
Orbital Sander Pads : amzn.to/3NmH3UY
Respirator : amzn.to/3wvD9U0
Safety Glasses : amzn.to/36JSC7Q
Angle Grinder : amzn.to/3izZ0kQ
Wire Cup Brush : amzn.to/3D9IMbI
Wire Wheel : amzn.to/3uxJkV4
Flap Discs : amzn.to/3iz2eFu
Delicate Surface Masking Tape : amzn.to/3JDKKUj
Workbench Primer : Rustoleum Primer Sealer
Wall Primer : amzn.to/3Nfpiap
Porch Floor Paint : Behr Premium Porch And Patio Floor Paint
Vinyl Peel & Stick Planks : Dura Decor Arctic Distressed Wood
Vinyl Roller : amzn.to/3iBpEdk
Wall Control Panels : amzn.to/3itGrPp
Speaker Mounts : amzn.to/36JzUxs
8" Bench Vise : amzn.to/3wCk2I0
JB Weld : amzn.to/3JJzOEv
Heavy Duty Shelf : Husky Model HBR782478W4
Storage Totes : Sterilite Black & Yellow (19 & 27gal)
************************************
Songs & Sounds provided from the RU-vid Audio Library. (In order of appearance.)
- Sun Spots by Silent Partner (Intro)
- Smokey's Lounge by TrackTribe
- Smoke Jacket Blues by TrackTribe
- Busy City by TrackTribe
- Midnight Special by E's Jammy Jams
- Running Errands by TrackTribe
- Members Only by TrackTribe
- A Brand New Start by TrackTribe
- I Have A Reservation by TrackTribe
- Grey Flannel by Vans In Japan
#GarageMakeover #DIYRemodel #Workshop

Хобби

Опубликовано:

23 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@moviegirl45 Год назад

very nice work!!! my kinda GUY~~ AWESOME WORK IN THE GARAGE, AND NICE DECOR in the garage. very inspiring!!!

@rangersmith4652 Год назад

Task creep: If I'm gonna do A, I might as well do B while I'm at it, and B gives me access to C... Eventually, you find yourself building a new garage. Conversely, inability to do B can stifle progress on A... I should B while I'm doing A, but I can't get the materials for B, and I'm not doing A until I can. Anyway, you got there, and the results are great.

@49ccscoot Год назад

😆 These things definitely snowball a bit. ⛄

@mohdjemadil4527 2 года назад

He's back

@williamshedden2081 Год назад

Looks good 👍

@cleanasdirt6832 2 года назад

For the top of my metal workbench, I purchased a stall mat, cut to fit. It can take a beating.

@49ccscoot 2 года назад

That does look really tough. Thanks.

@onsapplikasies8620 Год назад

Great job.

@jcclassybro9426 Год назад

Awesome bro...looks great....nice work.....

@opichocal 2 года назад

Nice job! I remodeled my garage 15 years ago and it’s time for another upgrade. This motivated me to get out there and start. Thanks

@49ccscoot 2 года назад

Thanks and good luck with yours.

@dexterousx92 10 месяцев назад

*"Wow, what an incredible transformation! Your garage makeover is truly inspiring. It's amazing to see how some paint, a creative backsplash, and smart storage solutions can turn a space into a functional and organized workshop. Your attention to detail is impeccable, and I love how you've created such an inviting and efficient work area. Thanks for sharing your journey - it's a fantastic reminder that with a bit of vision and hard work, we can transform any space into something special. Keep up the great work!" 🛠✨*

@49ccscoot 10 месяцев назад

Thanks so much! There's an update vid as well if you're interested.

@thephranc 2 года назад

This winter was a mess. They didnt salt for the big snow event that shut down most of the main highways but then over salted for every time it looked like it might rain. We just cant deal with snow in MD.

@49ccscoot 2 года назад

Hey. Long time no see. They salted for the biggest snow around me, but they definitely laid it on thick at times where we got next to nothing. In their defense, I'm sure it's a tough job with weather uncertainties paired with liabilities if treatment is insufficient.

@chrisanthony144 Год назад

great job bud!

@4wdglampingaustralia102 2 года назад

Tidy workspace makes working so much better.. Well done.

@mustangjustin7654 2 года назад

This is a fantastic video. Very well put together & descriptive. Plus the shop turned out great! Good work man.

@MangoTangoJKU Год назад

Nice job on the upgrades! Looks great!

@cetyl2626 Год назад

Love the backsplash idea!

@im58woody Год назад

Great job on everything !

@stevenburton Год назад

Looks great!

@scottscopters7 Год назад

I love how you splurged and did 100 other things. my garage has been through quite a few revisions as well. seems nothing is ever done, just constantly improving

@49ccscoot Год назад

It didn't necessarily make financial sense, but it has been a much more pleasant place to work.

@tinnedanger Год назад

If you want a cheap, tough rubber workbench top. Conveyor belt. It's 1/2" thick and 2nd hand. It comes in lengths of several miles. They'll give it to you.

@dqvve 2 года назад

Sick !! 🤟🔥

@49ccscoot 2 года назад

Thanks!

@ItsMe-dj8zd 2 года назад

It came out looking great!

@49ccscoot 2 года назад

Thanks Ryan! Looking forward to our next get together and ride. Been meaning to say hi.

@johnthomas4210 Год назад

Nice job on the garage. Another idea for mats for the workbench are tractor trailer mud flaps. Normally come in two sizes 24x30 in. and 24x36 in.. They are like "project" size, so not covering the whole workbench. They come in two variations, hard plastic and rubber. The hard plastic is ribbed on one side and smooth on the other. Easy to clean and portable. If they get screwed up, they are cheap to replace and they take a beating. You can find them anywhere they sell heavy duty truck parts.

@49ccscoot Год назад

Thanks. Even with a larger covering, it could be nice to have one or two of those around.

@cousinschlappy7243 2 года назад

Great job looks fantastic !

@49ccscoot 2 года назад

Thank you!

@briankear8661 Год назад

Great job. It’s going to be much nicer to work in the new space! I’m even more fired up now for my new garage to be completed in a few months to include some of these ideas.

@49ccscoot Год назад

Thanks. It really has made it more pleasant to work in there. Now, if I'd ever finish the other half... 😆

@Josemanc 2 года назад

By the way we were missing your vids

@robertpierce1981 2 года назад

I made it to the end. Damn you were busy. Now I’m into the rock slides. Fun. If you have a quarry or concrete plant near you elevator machine belts are wide flat, may be smooth on one side or both. When they break typically maintenance departments keep the old belts for emergencies. Sometimes they’ll sell old belts at “cut rate” prices.

@49ccscoot 2 года назад

Good tip. I'd imagine they're very tough too.

@elizabethmcheffey8699 2 года назад

A short “whiz” roller is perfect for cutting in something as rough as a garage the edge has nap so it will do an inside corner. Nice 👍🏻 job buddy🛵

@49ccscoot 2 года назад

Thanks!

@karstennosse9030 Год назад

…looks good. But the patina of the old shop is gone for ever ….which I liked.

@49ccscoot Год назад

I did sort of like the old area with all the performance stickers and stuff, but I've been really happy with it this way. Working on getting the other side to match ATM.

@jonbalint795 Год назад

Brent, a nice alternative for those mats on the workbench would be horse stall mats. They are $50 for 6’x4’, I actually have half my garage lined with them. Super easy to clean with simple green and easier on the knees than cement flooring.

@49ccscoot Год назад

Thanks. So far I'm happy with the workbench top. It has held up well. I do keep a piece of board nearby though, so when I am doing something rough I can abuse that instead of the mat and bench. The anti-fatigue mats were pricey, but also holding up very well and I like them much better than the cheap block style mats that I used for a long time.

@danielclassics12686 2 года назад

Nice work 😉👍🏻 Looks really good 😉👍🏻

@49ccscoot 2 года назад

Thank you.

@danielclassics12686 2 года назад

@@49ccscoot No problem.Keep it up😉👍🏻I'm looking forward to new videos 😉

@japup1237 2 года назад

Wow you did say you had the project in that looks so good👌👍

@49ccscoot 2 года назад

Thank you.

@progaragechinskiemotorki 2 года назад

też musiałbym swoją przybudówkę odnowić :D super robota od razu widać profesjonalizm :)

@49ccscoot 2 года назад

Thank you!

@elizabethmcheffey8699 2 года назад

Shame to lose the stickers

@robertpierce1981 2 года назад

I’ve missed your videos!!

@49ccscoot 2 года назад

Thanks!

@Josemanc 2 года назад

Looking good. Only thing you need is pick up some epoxy paint an hit the floor. That creates the smoothest surface. I did that in my shop and it really helps been able to clean oil and dirt in seconds.

@49ccscoot 2 года назад

Thanks. I have thought about that in the past and during this project. Maybe later. The next thing that I really would like to do is insulate the garage doors. Largely because of road noise. I had part 1 of a root canal, part 2 is coming next week and then build up and crown, so that ended any garage budget (that I was already way over lol).

@pubbiehive 2 года назад

Very nice! Looks like a massive improvement from before. Btw for storage, you could consider making a loft if you have a tall enough ceiling, maybe not the best for your garage but when I had a workshop with my friends we had over 16 ft of headroom so we had a shed inside the shop which we could stack shit on top of.

@49ccscoot 2 года назад

There's an attic over the garage, but the construction company messed it up. They ordered the wrong trusses and never caught it so we ended up with tall ceilings and an attic that you can just crawl on your hands and knees in.

@Aj-om4dt 2 года назад

I wish you could sort my garage.. Awsome job dude

@49ccscoot 2 года назад

I wish I could finish mine. It's still half done. 🤣

@MarkSmith-rc8bx 2 года назад

Hi Brent.. That turned out great! Nice work. I am getting ready to pull the trigger on swapping out the carb on my Roughhouse 50 (with 70cc kit) for a 19mm. so I was re watching some of your old videos... It hit me that I haven't seen anything from you for a while so I went searching... Glad to see you are back at it. Cant wait for some warm weather and to see what kind of hot rod scoot you will be building this summer... Take care

@49ccscoot 2 года назад

Thanks Mark! You'll see some scooter related stuff before too long. Good luck with the carb swap. Not sure which one, but I've been very happy with DellOrto PHBGs. They fit nicely into stock intakes (mild porting may be beneficial, especially with the larger 21mm versions, to match them up to the carb size). Stock airboxes can fit on them so they can be pretty inconspicuous. Lots of people love flat slides, but the PHBG is a good carb IMO.

@MarkSmith-rc8bx 2 года назад

@@49ccscoot Hi Brent. I went with the $85 Delorto knock off Naraku 17.5 from Scootertuning... The fit was great and I have it pretty well dialed in (I think) The only hiccup was the throttle cable was not an exact swap... I was able to make it work but I think I will end up going with a longer cable so I can use the adjustable 90 cable guide I bought.

@acme511 Год назад

Nice you did a great job for little money. I am using DIY French Cleats for wall organizing perhaps that would work well for you also.

@sabretech2001 2 года назад

Very fancy. Where are you going to put the tea service? (grin)

@NOFx420x 2 года назад

I love the shop and if you had a minute I have scoot question for you specifically for a 2t carb

@49ccscoot 2 года назад

Thanks. Go ahead and ask.

@Smallbore2wheels 2 года назад

That looks so good! I have some of those metal pegboards. Like you said not cheap but they are pretty durable

@49ccscoot 2 года назад

Thanks dude! The lame part is, I don't have a single wall control accessory. It's all standard pegboard stuff on them because anything for wall control seems to be more expensive.

@Smallbore2wheels 2 года назад

@@49ccscoot yep. I ended up going with metal pegboard accessories. They are just made of a bit thicker metal so they fit into the peg holes a bit better

@vwtransportersandmotorcycl3729 Год назад

Wow you spent loads on the garage!! Im looking for ideas to do for my channel. Garage looks good but our dont tend to be as big in the UK

@49ccscoot Год назад

I don't think I spent that much to do the whole garage. Most of it was cheap-ish, but I could have definitely saved money by building shelves with 2x4s and plywood or using standard pegboard instead of the metal wall control. I've been happy with both though. Time was the biggest investment.

@paulbudford 2 года назад

That's soon escalated! Nice job though. It is going to be a better place to work, and much more productive. 👌

@49ccscoot 2 года назад

Thanks. Maybe. Now I'm scared to mess it up. 🤣

@seankurek1705 Год назад

Best way to paint it is spend the $300 on an airless sprayer. Could have painted the whole garage in 20 mins.

@jasondaponte6800 Год назад

Want to see more about your sv650

@49ccscoot Год назад

I don't have an SV650. I'm assuming you're seeing my 2011 Yamaha TMAX 500. Lots of vids about that are up.

@monosurge 2 года назад

Project taotao when? 😂

@49ccscoot 2 года назад

Good question. I swear I keep saying and telling myself that I'm going to get back to it and then I get wrapped up in everything else. I realized just the other day that I've had that thing for 9 years and I think my last video about it was about 7 years ago. I had no intention of that sort of time passing. I've got a whole pile of parts for it. By the time I get there, they'll be new in box antiques.