Garden sprayer fix 

Neem oil had turned to sludge but I tried spraying anyway . . .a disaster. Your method worked great, thanks!

Thank you from the bottom of my heart for this video! I went to use ours a few hours ago and it wouldn't work. I had already mixed the solution and was ready to go into "battle", and ended up using a regular old hand trigger cleaning bottle to spray my son's room. With it being the middle of the night and no ride to Wal-Mart, I decided to throw in the towel and wait to get another sprayer. Then I stumbled across your video and was able to unclog it. Thanks again for your video!

Two seasons in a row my sprayer got clogged. I watched this video again and unclogged it again. Two different problems, two different solutions. Thank you very much for saving my sanity and some money.

Thanks. This solved my problem. My flow tube inside the sprayer bottle had become detached. In my sprayer it's nothing more than a long straw. Who knew something so simple could shut me down totally. I'm up and running now.

Nice to hear the kids playing in the background! You can tell by the sounds that they've learned how to have a good time without their faces glued to screens!

Nice video man! Thanks for the tips. I've bought countless garden sprayers and always end up throwing them away. I knew they were clogged but never took the time u did to disassemble. Thanks!

Thank you so much. Boyfriend insisted it was time to throw away, but it works just fine after the water flush! And now one less household item in the dump and cleaner carbon footprint. Again, thaaaannnkkkk you so much!

I tried rinsing my blocked pieces under a faucet with no success. I will try again with a hose. Thanks for the detailed walkthrough, exactly what I was looking for.

thank you! this helped me figure it out. the trigger part was clogged.

That's what I needed to know. I just fixed my garden sprayer. Thank You!

Hey bro, thanks for the FYI, did the purge, sprayer working perfectly. You the man!

Thank you so much for taking the time to make this video...thumbs up to you!

I used this, and it worked! But it stopped spraying again after about 2 minutes. I've pumped it and it still will not spray. Surely it wouldn't have gotten clogged again so quickly? Any recommendations? I was using it when it quit the first time. The pressure is building up in the bottle, but nothing will come out of the sprayer.

Also the cylinder of the pump has a round rubber flap that you can lift up at the edge, run it under water and swipe your finger around it. There are holes under the flap that can get clogged.

Thanks so much for the help, u completely made my day better. Lol...

It worked, thanks for your help!

HELP!! My Green Thumb 131384 sprayer is full and fully pressurized, but won't spray (though it worked earlier today!) How do I SAFELY release the pressure to begin the cleaning process shown in your video??

very helpful, I fixed my sprayer after watching your this video, Thanks man

I’ve tried it and it worked. Thank you

Thanks it worked for the smaller but not for the 3 gal. with wheels

Great video. Fixed my problem in 5 minutes. Thanks!

You can avoid some issues if you store your unit with no liquid when not using regularly.

Thanks. Was about to but new one; will try this first.

Chuck, (Help) water keeps coming out of handle area .I filled with plain water after it sucked out 1,/ 2 gal. vingar lost worked for a bit. then started sucking water out at pump handle area .

What do you have attached to the garden hose?

Thank you! My tendency is to throw these away when they quit working!

worked great ! thanks I was on my way to Loews to buy a new one!

Thank you so much, you are a good teacher! i happened to have a problem to my sprayer yesterday, I'll try to fix it today, just what's that device attach to the hose which you adjust your water flow with.

Got it working again. Thanks!

Brand NEW 2 Gallon Sprayer from Walmart..Checked EVERYTHING that I'm Aware of & it just WONT Work.NO PRESSURE Nor can I even get ANYTHING 2 come out...Any SUGGESTIONS???PLEASE

Hey man you saved the day with this video Thanks a lot. Brother

Thanks for the video. You are the man..

My problem is in the handle... I can squeeze the handle but the valve never seems to open! Any ideas? Thanks

THANK YOU!

Excellent thanks, I’ve also tossed the old and got a new one. This worked for me !

Hate when this happens thanks man

Awesome. Thanks for sharing.

where to get the plastic white washer

Chuck - thought you'd like this: Save Time Charging Up Your Lawn Sprayer Try it. It will save you a heck of a lot of pumping.

Thank you. Works like a charm.

I'm going to go try it on mine. Thanks

Thank you. This was very helpful.

Thanks Chuck!

Thanks! Very helpful!

My handle seems to jam and not stop the stream from coming out. Suggestions?

My pump does not work How do you take it apart ? All my lines are “clear.”

Thank you so much..

Thanks Chuck! Man? I watched my BOSS throw too many of these things away&waste $$$$$ that could've gone in my pocket cause I'm the Guy who actually sprays the weeds at all new Properties as well as maintaining lots that he Already owns; Man? It got to this point of where I was getting TIRED of being sent to Lowes every 3 Jobs! Thanks again Chuck! If this continues to work? I'll have Sprayers for SALE! 🤣🤣🤣✌

Thank you it worked for me!!!

You've missed the most cleaning step. Remove the handle and clean out the plunger and spring assembly in the handle. Use a flat blade screwdriver to pry to handle off gently.

and don't forget to clean the tank of any debris in the bottom or sides.

My problem is its not holdingin the pressure

🥰🥰🥰

Model # is m1mp16

My tank releases water but for only 5 seconds

These things have terrible engineering and are mostly made in China so they are very problematic. One of the most obvious flaws I've seen in 90% of these cheap ass sprayers is there is NO filter or screen down at the bottoms of the pickup tube inside the tanks so when you get any kind of dirt, debris, congealed cleaner, bleach, chemicals it gets picked up and lodges somewhere in the sprayer gun small valves assembly or the tip. It always happens. Why in God's green earth the factory's don't put a small screen, open cell foam or filter down at the end of the pick up tube is beyond me? I think they know most people just throw them away and buy new ones!!! What a way to sell your products!!!! Next time i buy one i'm making sure it has a filter on the bottom of the damn pick up tube or make my own out of open cell foam (like an air filter foam materials) and glue it on on the end with cyanoacrylate fast dry adhesive....bet it will work great!! good video...thanks....been there and done that many times and gets old fast. These things can drive you nuts!!!!

Cherk

Mine is brand new and only put water in it to test before putting chemicals in it. A Round Up 2 gallon sprayer. Nothing works- nothing comes out after pumping like 100 times

Great help!😊

I've a kingfisher 5 litre water pressure sprayer that's pumping OK but then air leaking from underneath green cap. New seals, o rings have been added but no difference.

Thank you Chuck from England…👏👏👏

Hi, thank you so much. I followed your steps , I found the little yellow tip on the end of the hose needed a pin to open each section of the grooves at the end. The sprayer hose finally cleared. Hopes this helps someone else . 😊

Thank you just fixed my blocked pipe .. there was mould build up at the bottom cap

Thank you so much. I’m a 77 yr old widow. Followed your video and my sprayer is working. You had the best video of any I watched. ❤️

All of the little people in the background are having a meaningful conversation 😅.

What type of nozzle do you have on your hose? Is it a separate attachment?

I'm wondering if anyone can help identify what my issue is: I have a Solo sprayer (manual). When I begin using the handheld pump to gain pressure, I can hear the liquid bubbling and within a few minutes the liquid starts overflowing through the top of the sprayer. It doesn't matter if I fill the pressure sprayer half way, 1/4 way or full, the same thing constantly happens. Everything is tight (lid, wand, all connections etc.). Filter is clean. I'm stumped as to why it keeps happening :'(

Very helpful. Thank you for posting 😊

Thank you❤

Saved me money. I was going to toss both of mine!!!

Thank you so much!

thank you thank.. I was doing just that, buying another after another....

Oh my goodness thank you so much for this video! I've followed your instructions and wha-la its working like dream, job now done : )

Thanks a lot. Im one of them that throws them out. No more.

what is the name of that sprayer,i like how it is made.

That's great, thanks; any more advice? My delivery is not plugged as air comes out but no fluid.

thanks! your video showed about cleaning the tube and another video showed about cleaning/repairing the handle. between these 2 videos, i now see that it's not yet a time to just throw away these sprayers before checking out some possible diy easy repairs on them. thank you very much!

I got it fixed work like a charm I just had to pull hard on it thanks a lot

I did what you said it work for a few minutes then I tried so the problem is where it connects to the 2-gallon it will not come out looks like it is glue in so what do I do next

saved me from buying a replacement, thanks

is it possible to take the handle apart and clean it? I don't know how the Chinese make some of this stuff. There seems to be mechanical moving parts inside of a sealed plastic casting.

The other end is clogged on my spray, the tube in the bottle.

Thank you! You’re a God-send. I recently lost my husband and I have no idea how to do traditional men things. God bless you!

Much appreciated bro, saved me a headache and a few dollars

👍 - top tip ! got me spraying again - thank you !

Thanks Chuck

I used compressed air on mine. Couldn't tell if any shit blew out of it but works like a MF now!

I have one I've only tried to put water in and it never sprays despite having plenty of pressure. ☹️

My sprayer is different in Australia .

Mine is leaking from the top where it screws in…

What part is that on the end of your garden hose that allows you to adjust the water flow?

Thank you for this but sadly, here it is 2021 and they must have wised up to this because our sprayer handle doesn't come apart nicely as your did. It is affixed together. Have a blessed day and thank you again

The trigger won't lift on mine? I have no idea why! How does it work? I have no idea? Does it have a spring? Does it work through pumping? It's not stopped up. Does air lift it? I can't find ONE video. Not one. Can't believe no one else has this problem? Why won't the trigger lift?

What would cause the plunger not to pull up. It is extremely tight and pulls down.

After I give my sprayer a few pumps the thing just keeps spraying by it self without me pressing the handle to spray? I will take it apart to see if that would help. Thank u.

Good ol boys gonna make thangs work. Amen

Thank you! The secret to success is to use the “jet stream” on your garden hose! I use a sprayer from Ace Hardware for vinegar weed killer and tried to clean it with the faucet in my utility sink. It still wouldn’t spray. After watching the video I used the jet spray setting on my garden hose to clean the various parts of the spray apparatus. When I finished spraying I cleaned them again with the hose and left the parts unattached so they can dry thoroughly. I think the vinegar and salt are part of the problem. They seem to crystallize in the spray apparatus. Again, thank you very much. RJ. Durango, CO

Mind if I ask what you spray to combat your brown recluse population?

Thanks for the tip, I bought one of these sprayers @ Estate Sale and could not get it to work. I tried your suggestion & now it works. Thanks :)

What if there no pressure building up when you pump it