Gas Scooter SPEED KIT BLAZE 49cc 

Thanks for the comments and following. I am sure I will have some new scoot videos soon as the weather warms back up. And who knows, maybe we get one last flash flurry and I do some winter shots too lol. **SK**

That's awesome!! Tell them all thanks for watching too!**SK**

Where can you get one?

Maybe once it blows, or I may go 2000w electric conversion...but probably not before unless I just stumble upon a great deal on one and feel up for the afternoon project.

I believe like 45 teeth. **SK**

Got a 25 but I think the 17 was for a different chain

Well be putting a 25 in the front and the 38 I have replaced the clutch but I don't want else might be the problem with the speed I think the one is a 17 but that should not make a difference is when you take to much chain out will that matter

I don't see why it couldn't possible fit other scooters or small motorbikes. But I did purchase it from the Blaze company so it is for sure made for this specific scooter. Link to buy it is in the video description if you are interested.**SK**

@jessemariahraymond150 I may do that soon, I could use a few more mph

No it came with a separate chain. **SK**

Another thing. I haven't used my mini bike and scooter for more than 5 years. But this video inspired me to want to fix them and get them up and running again.

Thanks for the feedback Danny. I think in your situation it's more about the power units in each machine rather than their respective sprockets. Because typically larger sprocket in the rear leaving the front the same increase low end but reduces top end. But if you have different size or swapped the front sprocket that can play into things as well.**SK**

@@dannyherrera1598 Glad I'm not the only one getting a little nostalgia for some old toys. Hope you get them up and running and no time, and little issues as possible. Have fun and thanks for watching. Be sure to Subscribe! I have a ton of diff. content, including a new Lamborghini Huracan video which you may enjoy😁.**SK**

Mine sprocket combination 20/44 top speed is around 45kph to 47kph my weight is around 47kg

Yeah, it's GPS speedometer.**SK**

I think your 25 mph assessment is probably accurate OTB for the 2 stroke. Downhill, sure, those top speed figures may be right but that's not how people invision being able to go top speed so I agree, not very accurate. Thanks for your feedback. Be sure to Subscribe! I am sure I will have some new videos out soon with the scoot. **SK**

@@SKLIFEstyle It's false advertising on their part & it's illegal... period. Ever since the pandemic started I've really had to keep an eye on my budget so I read EVERY little fine print detail before purchase & if you read carefully it will say that their speed claims are based off of a 150 lb. rider on a flat, paved surface. I fluctuate between 155-160 lbs. so the difference shouldn't be 10 mph slower imo but like I said I haven't actually measured top speed yet but trust it feels slow; more like 25mph to me. My sister only weighs like 135-140 so i'll probly get her to test it for me👍

@@SKLIFEstyle I finally downloaded a speedometer app & tested the scooter today...22mph was my top speed...the route I take is approx. 4.2 miles & it includes a big hill so that top speed was probably me going downhill, too! This freaking chinaped sucks from blaze scooters & this was WITH a performance air filter installed NOT the ugly stock air box👎

@jbone1383 Yeah I haven't messed with the airbox, but not surprised. I didn't buy it for the speed so it doesn't rattle me too much but I certainly get the frustration. One brightside at least mine has held up and runs, hope you get dome good life out of yours too.

I will try and do that in the coming weeks.

I was driving on the highway and bottom out on the storage could be brought up but that's just me

I can't remember but it was 2-4 mph down from what I expected.

I honestly don't know, but I updated the description box to include the link to buy that kit.**SK**

T8F I bought a chain from Amazon comes with the tool I don't want to pay his price so I got a 44 in the back but I am getting a 38and 25 but I'm getting 20mph but I also have a broken exhaust you measure the holes with a caliper and it like 29 mm center and 35mm mounting hole I have been buying a gx35 parts the pull switch is 13 became when i got arrested on the. Highway they broke the valve covers I bought one from Amazon but got it from e replacements parts good to have a extra pull switch Uber won't let u take it I started mine and broke the cord right after it started that engine might not be 49 cc the bore and stroke is listed but I don't have a problem I think a lie will always be a lie the truth will always come out were a helmet and don't get. Life flight I was ran over on a bike and died 4 times not to mention a coma

A week at most. It was quick for the accessory. The scooter itself as well to be honest.

I ordered one several weeks ago but the shipment from China wont be here until July 29th, sucks.

Very welcome. You know I am not home so I cant check but I believe it is welded...but then again how it's constructed it wouldn't be out of the question that there is some bolt, but I don't recall seeing one. As for engine position, I don't think there should be an issue except you will have to get a longer brake cable and re-route it.

@@SKLIFEstyle great to know about the brake cable. Im just hoping I dont have to get an angle grinder or hacksaw out just to remove the bar but Im willing to do so to fit the predator motor.

I broke the weld pulling something and wrecked i have it hooked by two bolts with a smaller pipe underneath and I have it screwed in to the seat pole I took the plastic cover for my light

Hey Dre, thanks for the call out and feedback. I will keep adding to the scooter series too, so be sure to Subscribe!**SK**

I've watched all of his videos on this scooter & I actually think that's his gearbox whining b/c he never put any gear oil in it, 😆...I just ordered this same scooter yesterday & they sent me an e-mail today saying that you definitely have to fill up the gearbox about halfway w/ 75w-90 gear oil because the factory just coats everything inside w/ a light grease during assembly but that would flash off pretty quick if you didn't add gear oil & just ran it dry

Hey, I am not quite sure I follow your question.

I would like to send a pic of the scooter mods I was talking also about my wreck recently, and a ticket

@@danyalarafat1271 You can message on FB at SK Lifestyle or email them at SKLifestylechannel@gmail.com

I wouldn't doubt you could, but I haven't tried. Just a 50cc Honda/Ryobi clone engine pretty much. I know Blaze Scooters sells parts, too, you can probably get one there, too.

Hello, can you translate to English? It wont let me copy and paste in the app**SK**

I believe it has 44 teeth.**SK**

That I do not know...but in my opinion I would think it'd be possible based on its pretty simple design.**SK**

@@SKLIFEstyle thank you for your reply I might give them a try

I have only one flat I have a spare rim just have to install it somewhere

That since March I drive about 40 miles a day I was thinking I should start a channel

@danyalarafat1271 yes you should if you are interested in scooters lots of people like them

Thanks!! I think that is all dependent on where you live, on a local basis.**SK**

if its under 49cc yes if it says its like 52 or 53 cc then your still fine because thats just what the round the actual cc up to the real cc of the bore is around 48.4cc

My manual came out to 31 cc

I have only got in trouble once since March I ride about 40 miles a day and I was on the highway towing a trailer ride untill I die broke my jaw and wrecked a couple of times lights went out be careful u can never have enough batteries

Yeah, hopefully I will get around to showing some of the other upgrades soon. Thanks, you too!**SK**

Thanks! I will def. have some more accessory videos out soon, just have to edit the video. And some offroad hill test once it warms up. Be sure to Subscribe!**SK**

Intake, exhaust, speed kit and maybe even upgraded plug could probably get you there...plus constant watch of air pressure in the tires. Thanks for watching and the comments, be sure to Subscribe! **SK**

@@SKLIFEstyle links?

I got a 20 tank for a gallon and a locking tank for the front it was 30 I try to prepay because I spelt stuff that I had to pay because it was broke also goosegrips has one that can be made to work I just use the fender bibe but was bent higher so I can tow

Amazon and ali Express for the locking one I have it one front

@@danyalarafat1271 Thanks, but they stole my scooter. I miss it so much.

its gonna be slow as shit if its friction drive and you will have more wear on the parts these things stock go faster than real $700 gopeds