Gas Stove Burner Not Working Easy Fix 1 

Thank you! I live alone- no husband or even a boyfriend to come over and help me with my burner. I followed your advice, and it worked! Makes me miss electric stove tops!!!

Thanks so much for making this video. My right rear burner wasn't igniting and I followed the video. Cleaned all four and now, they all ignite quickly as well. Thanks for the tip and for saving me a repair bill.

Thank you, you just saved me a couple hundred dollars & a lot of hassle!!! Long live RU-vidrs like you 🙏🏻

Thank you Sam for leading the way in helping me repair my stove.

Holy cow... I wish I had found this video several years ago. Dealt with a clogged burner on my Frigidaire stove for years because I couldn’t figure out how to get the thing off. I wish I had found this video before I finally figured it out on my own. This is exactly what I needed. Thanks for putting it out there for others who need it.

Thanks for the quick fix! Was in the middle of cooking and experienced this problem. Typically I just clean it out completely and it works. Knowing exactly where the issue is helped fix it in seconds! I am a bit in a hurry so don't have time to clean it out or take it a part so I just poked the toothpick in there directly and worked immediately.

Thank you for demonstrating how to fix the problem. The toothpick easily broke free clogged debris and I used a 3/16" socket wrench to loosen the bolts from the burner on my Kenmore stove.

This worked! Fixed my burner and my big middle burner as well! I thought i had to pay a repair man! Thank you for the video!

My man thank you. Took me legitimately less than 2 min to fix my burner. Thank you and RU-vid. Gotta love it.

Thanks Sam! Had I known this was such an easy fix I would have been using more than the single working burner for the last 4 years😝

This worked so quick! I didnt have the tools to remove but I poked a needle through the hole and it worked immediately :D thank you!

Not sure if the person who made this video will ever see this, but I was having the same problem. I was going to call my home warranty people and that would have cost me $75 in a service call. So, I looked my problem up and found this video. Took about 5 min to fix....very easy!!!! Just when your done, put on the small black top thing back on the burner or the gas wont light. The top black thing keeps gas in the burner so the ignitor lights it. If the person who made this video is still here and your in Carson Nevada look me up.....I owe you a beer!!!!

This was PERFECT! Totally fixed my burner! Saved me from paying for a repair

Thank u !! I was about buy another 1000$ stove .. cleaning it now ..

Worked great! Thank you so much. This is what you tube knowledge sharing is all about!

This was a great video! I thought I needed a new stove! Followed these directions and boom! Burners working again. I will mention that the first burner after I unclogged the small opening came right on, the second one, no luck. So after repeating the clearing process, I tried it again. Still no luck. So what I did was manually light the burner and let it burn for about 3 minutes. Then I turned it off and tried it again, just using the knob on the stove. Success!!

One time I have some oil on the cave and it was not able to light. Even I clean many times, still didnot work out until I saw this video. No dirt at all, but just a small oil block the hole could cause the same issue. Thank you Sam

this tip worked exactly as described! the igniter port was clogged so badly that I couldn't even find the hold at first...an easy fix and saved lots of $

Simple fix... Worked like a charm. I took completely apart and cleaned... Wouldn't still ignite... But never thought about that little hole... That was the problem... Thank you sir

Thanks Sam you save me a lot of trouble and a visit from a repair man.

2 burners did not ignite. Now fixed. Thanks so much!

Thank you! I’m lucky that my husband does 95% of the cooking which he likes to do, but he is the messiest cook I know. So I clean the stove, grates etc. and I guess it was the hole that got clogged. I didn’t even have to remove the burner, just stuck a toothpick in and then used a small dry brush to wipe off the top of the igniter and then the burner lit!

We tried everything, cleaning everything to no avail. You showing us the clogged hole triggered our repair. It's a small burner and hard to see. Thanks much for this video

Thanks Sam...a good toothbrushing and safety pin port cleaning did the trick!

Thanks I believe this is what I need to do will do that tonight! Just did it and that was it!!

This was a little helpful for my KitchenAid - my burners dont have that "little hole". BUT< I still removed it, used a gentle brush on it, (even though it was pretty clean), gently poked a toothpick delicately in the tiny hole where the gas comes out from - and VOILE! GAS! thank you Sam

Worked great! Never thought about that tiny hole on the side!

Thanks for this-just what I needed to fix my burner!

Like a lot of things, keep it clean and it will give you years of good service!

Great video! However, you might want to emphasize that you should never use any kind of chemical cleaner, when working with any gas issues...🤙🤙

Thanks so much. You really made it easy to understand. I’m going to try to fix my burners now. Wish me luck!

Thank you I watched this and did exactly what you said and did! plus used a wire little brush and scrubbed it down ! Worked great after that !

Thank you! This is a the video I needed. Some other asshat was like the top just isnt leveled. Your amazing ty!

I had this exact issue. Your video was clear and fixed my issue. Thank YOU!

Sam, thank you for your video. I followed your tips and now my burner works like new again.

wow! my burner has not been working for months. i put it through dishwasher, scrubbed with wire brush etc. but it still didn’t work. after watching your vid i grabbed a needle and within 30 seconds it was working again. thank you so much!

I clean these all the time. You can just take a paperclip and poke that hole without taking it off and clear it out

Very helpful. Did it and it worked. Unclogged the port. Got flame

Thank you so much for this video. It helped so much. My stove is working like new again.

Perfect! My challenge is that the two screws holding in the burner in place are corroded. I was able to turn one screw (Robertson head), but then the head just popped off the screw leaving the thread i place. The other screw has a stripped head, so it will be even harder to deal with Now I am nervous about proceeding. I fear it might become a major project.

My burner lights, but it's a very dim flame that barely gives heat. I wonder if it just needs this cleaning. I'll be doing this this weekend first! Thanks!

Thank you. Ran out of propane but since a delivery my stove hasn't lit. I'm guessing this is the problem so I'll be cleaning the burners today. Hopefully it is and not an issue with the tank.

Thank a lot ,i had this type of problem with my gas burner .Thank you 🙏🏻 very much iwill clean now.Can i use needle to clean hole.?

Thanks, I fix my gas stove by watching this video.

great tip. Thanks Sam! I'll give it a try. Having exact same problem you describe.

Excellent, its really worked

nice video i didn't have to take it off i just used a paper clip

Thanks for the video. May I know what's the size of nut driver that you use?

Hey thanks sam I about to buy the new ignition wire, just the hole was plugged up.

Thank you. You have a new subscriber!

Thanks for easy fix of my burner(ignitor tiny hole).

Worked a treat. Thanks for posting.

Omg it fixed my burner! Thank you so much!

Thanks for this video helped a lot it's short to the point and best of all it fixed the problem

It worked!!! Yay!! Thanks so much!

Thanks that was so easy.

What screwdrivers to remove the screws?

Thank you very helpful. Got my burner going.

That's all well and good but how to you unscrew the set screws? It looks like a screwdriver won't work on it.

Thank you so much for this! Super quick and easy. Thank you thank toy thank you.

What tool did u have to get those tiny screws out?

I need a screw to unscrew the burner 😭😭. Need to to do this before my mother find outs. It’s a brad new stove too 😔

Ur video is indeed very helpful. Thanks a lot. But can u kindly please help me...... My Italian hob is quite OK but in one burner I am getting yellow flame. It's all blackish stains are coming to pots. And I keep my all 4 burners very clean. So can u please please help me?????? 👍

Worked great, thank you!

Thanks ,Sam ! That's very helpful n works !

This was very helpful. Thank you.

Despite the knobs are in the OFF position, should the gas main feeding the range be shut off too? Need an answer ASAP so I can fix my burners on my Kenmore Elite.

Hi. Can you please tell me what drill bit or drill do I need to take out the screws. I have the same stove. Do I just buy a bit to attach to my drill I already have or buy a new drill? Please help.

Thank you for helping!!!

really clear instructions. thank you so much! it worked!

Thank you sir! Stove top burner fixed 👍

Hi, thanks so much for the video. My problem is what you described in the beginning of the video, where my spark is weak or faint on all burners. Would that be the igniter module that is defective? Thanks again.

Thank you so much ❤️..I was ready to go buy a new one

Great vid, simple and fast. Thanks for the help.

This video is gold! Thanks!!

Beautiful video and very important thank you 👍

What kind of screw driver you used ?

I tried to remove the two screws and ... snap! Screw heads are now gone. It was then I realized my Frigidaire range ain't nothing like your Frigidaire range. Screws were seated on top of range surface and now I would say I have to figure out how to remove entire stove top to see just what was anchored to it underneath by said screws.

Worked perfectly thank you

Thank you. I think this will fix my problem.

Should I turn off the gas or at I good without?

What screwdriver did you use??

Good job, sir. Thank you.

is there another video for my problem? when i turn on my burner, which is lit, i smell gas. It seems worse when the fan is on. I smell gas intermittently in the area near the oven while the burner is on. What kind of technician do i need to help fix this? the range is original to the 1956 house, built in. The oven is built in across the room from the range, they're not together. The burners work fine, they stay on and stay lit. i'm just trying to find out whether this is a problem and if so, who do i call? i'm pretty sure there are no parts for this range, it's a Range Master.

Thank you, this fixed my problem !

Thank you. Your video helped me 😁

Thanks for sharing this video it helped us

One of my burners has a hot spot the flame shoots out stronger on one spot then other side any experience with that ?

life saver!!! Thank you!!!!!

Thank you so much, great work this is brilliant

Great tips, thanks for posting.

Thank you. This helped a lot.

What tools did you use for open the burner?

Daughter used gas job and was fine, later I went to use it and no gas, no smell of gas and tank wasn’t empty. Got the ignition but no gas coming through?

This works! Thanks a bunch!

What kind of tool do you use to unscrew the stove tops?

Hey hey hey! Thank you so much. Great tip.

thanks fast and easy

Thank you !!!!!! 😊

Thank you!