Gate Pulsar HPA Engine // Bluetooth [ ENG ] 

Your headphones are broken

I am no expert but everyone has there own opinions on what is the best. I personally went with Wolverine since at the time I bought was more affordable especially for some additional upgrade parts. For example mine has two gas methods. One is a regular hpa tank and line but I can also run co2 cartidged inside the stock if I want to. I beilieve polarstar might have something similar but the cost was usually 2-3 times that of wolverine. Polarstar seems to have been in the market for a longer time so you will probably be able to get more after market parts or help. This gate Titan one seems pretty cool since you can get it as a single package with everything you need. While everything else you will need to get an FCU and electronic trigger unit wich are usually sold seperatly. Another benefit, at least from my understanding, is that the Titan has it all built into one unit so you really do save quite a bit on space. Also the app from Titan just seems cleaner and easier to use. I personally might upgrade my trigger and FCU to this Titan one if its compatible with the wolverine engine

It plays in my left ear lol

By Friday!!

I’m still getting low pressure with both the 128mm being at 270fps and the 155mm just barely touching 300 fps I messed with the settings a bit more to it’s limit to get where it is now, but was told that the hop up and the nozzle need to be adjusted / aligned Shimming the hopup and ensuring alignment was the only thing that was mentioned to me so far Seems like it’s an issue with getting a good seal, but I haven’t tested it out yet

@@iiAnferny yeah, I get 301 on 130 psi... Drop an update if you can and figured it out, I have a begadi neptun chamber, and those are designed with a shimming method in mind so you can fine tune chamber gb distance in seconds... Tested with the stock plates, and went up to a 2mm thick o ring without any result... Will update if i find anything tho:)

@@blackrul3z Dont know if you ever sovled this but from everyone I spoke to, this engine just needs to be run at a high PSI. I get 1.1j at 100psi with a 200mm barrel. The biggest problem with this engine is theres no anti stiction, so first shot FPS drop was absolutely horrendous until they released firmware 64, they seem to have done some work on solving it but I still get it sometimes.

@@matthewspencer2837 read that nozzle length is a problem too... Idk. Built several hpa m4s, not new in this tipic, but never ever had this much problems with any engine... The titan is nice, but...

@@blackrul3z Agree, its becoming a lot more hassle than its worth atm.

The wiring is different on wolverines. I have seen some basic mods to them working with the guerilla fcu but does require some soldering skills.

@@renosquadairsoft that a bit disappointing but it is what it is. Thanks for letting me know 😁

Guerilla does have a trigger board replacement and the new mtws have new firmware that give binary and stuff so who knows might come to gen 2 owners 🤷