Тёмный

GEMINI BUILD - Part 5 - Welding In New Floors Pans And It Gets Worse Before It Gets Better 

Hackshop Garage
Подписаться 36 тыс.
Просмотров 13 тыс.
50% 1

In this episode, we have a crack at replacing the floor pans in the Gemini, and it gets very rusty.
Sign Up for free to Burson Garage for exclusive deals, tips and tricks, and exclusive giveaways bursongarage.c...
Tiperformance's parts list 'As seen on Hackshop Garage'
www.tiperforma...
If you would like to support the show, Hackshop Garage Merch is available at www.hackshopga...
Also be sure to follow our socials for up to date content.
Instagram - @Hackshop_garage
Facebook - Hackshop_garage
Nathan - @crazycamo

Опубликовано:

 

12 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 65   
@65Coasty
@65Coasty 2 года назад
Use tech screws to hold the panel down while you weld.
@davidduffin8952
@davidduffin8952 2 года назад
Don't just wire wheel & seam seal underneath. You HAVE to weld underneath as well! Proper lap weld as you may not get a RWC without it.
@MrDOHC1JZ
@MrDOHC1JZ 2 года назад
Pins out on a Gemini are a ballache
@SomervilleMetalWorks
@SomervilleMetalWorks 2 года назад
I put a splitty in my garage one of the best mods ive done
@thewrathofbibby3381
@thewrathofbibby3381 Год назад
I'm a welder/fabricator by trade and even I think Im in over my head with rust repair. Its just to fiddly and thin lol
@nathanlord2689
@nathanlord2689 2 года назад
Holes!!!
@geradcarmody8138
@geradcarmody8138 Год назад
hey boys why do you beat the spray cans up in hot water
@jughtful
@jughtful 2 года назад
i like kbs rust seal for floors
@rosswilliamsssvredline
@rosswilliamsssvredline 2 года назад
Excellent work guys
@james22939
@james22939 2 года назад
Loving the series lads me and dad wacth every we are booth loving the attack on doing stuff you have never before
@grantlister
@grantlister 2 года назад
Just thought I’d check if I was in the First Two: Stanley Yelnats (Stanley spelled backwards) was a character in the novel Holes, by Louis Sachar & portrayed by Shia LaBeouf in the movie adaptation. I taught this story to a group of 9yr olds, as part of a Reading Recovery program, years ago. Hopefully the Gemini doesn’t turn into Camp Green Lake for you both & you keep away from the shoes. Loving the content. Kia Kaha, Grant from NZ.
@darreneccles8813
@darreneccles8813 2 года назад
Invest in a door pin puller guys
@kevinhamling1963
@kevinhamling1963 2 года назад
Good job guys.
@MikeJones-bj1cn
@MikeJones-bj1cn 2 года назад
Where the gearbox mount was, did you scallop the metal or potato cake it? lol
@NemetskyCzar
@NemetskyCzar 2 года назад
NSW/Vic ref!!
@IanilaIlaian-qj9lx
@IanilaIlaian-qj9lx 7 месяцев назад
Can't you sent to me that pan...i need too..
@grantvphotography
@grantvphotography 2 года назад
Stanley Yelnats, I remember the name from the book Holes I read as a kid.
@rorykalka1349
@rorykalka1349 2 года назад
You two must be FLOORED with the results.
@erikv86
@erikv86 2 года назад
I usually like to call holes in the floor "Yabba Dabba Do" mode enabled. Turned out great 👍
@MixMasterMark
@MixMasterMark 2 года назад
"oooooohhhhh I've just gaped out that hole" Not what I expected from a Hackshop episode if I'm honest Nate :D
@howey1975
@howey1975 2 года назад
Nathan freezing, hopes it won't be 4 degrees next video. Also Nathan, "should I wear pants today? Nah, it's still shorts weather"
@jamesbaylis9438
@jamesbaylis9438 2 года назад
Ahhh... Rust! how I love (NOT) that Rabbit hole that you tumble down. But you're right about doing just enough to get it done, as you could spend days sorting it all out. One more day closer to getting her back out on the Road. 👍
@andyjames2082
@andyjames2082 2 года назад
So now it's Nathan's side and my side 🤣
@bigdavedownunder
@bigdavedownunder 2 года назад
You can buy a hinge removal tool and new hinge pins at shop.....put new pan in screw or cleco to the floor cut through both pieces 1mm blade perfect fit perfect weld line flat no bits to hold water
@markaston325
@markaston325 2 года назад
Those door cards are rare and soooooo mint 👌 most have speker holes . 🕳
@UnwisePerformanceParts
@UnwisePerformanceParts 2 года назад
Off to camp green lake lads?
@Rcbunker11
@Rcbunker11 2 года назад
Holes= best movie, the Gemini now has Hecotor Zeroni rust holes
@HackshopGarage
@HackshopGarage 2 года назад
Hey mate, you are right, great movie, if you want to get in contact with us via our socials, we will sort out sending you a sticker pack
@BigCam545
@BigCam545 2 года назад
Good job boys way better than the rust 👍🏻 Whens the big block going in lmao!! Lol ive never herd that saying or reference before 😝
@andyjames2082
@andyjames2082 2 года назад
Is that rusted from the inside out, maybe a water leak?
@deadheadshed
@deadheadshed 2 года назад
Yep I agree! Hate to say this lads but I reckon there could be rust holes in the plenum. Worth checking it out before you go putting carpet in Cheers
@grimreaper6112
@grimreaper6112 2 года назад
Yeah old Holdens after rain you used to knock a hole in the floor with a screw driver to drain the water out.
@NUT84G
@NUT84G 2 года назад
I reckon you guys did a killer job hey. It’s about function as you said. Plus it’s under the carpet, no one will ever see it ;) If you get a chance. Have a look at how fitzee’s fabrications on RU-vid puts patch panels in ect. But getting in there and giving it a go with basic tools shows other peeps that it can be done. They do say that if you’re not a good welder you’re a good grinder ;)
@BOSSGTE
@BOSSGTE 2 года назад
Stanley Yelnats is a name I haven't heard in years! Holes!
@HackshopGarage
@HackshopGarage 2 года назад
Hey mate, you are spot on, get in contact with us via our socials and we will send you out a sticker pack
@BOSSGTE
@BOSSGTE 2 года назад
@@HackshopGarage will do. Cheers boys.
@aaronskylark8818
@aaronskylark8818 Год назад
Is dat from a masheen itms herr thatapets ov seee Imagn Powa upov engd orand Powa windws mekankl
@notold37
@notold37 2 года назад
Maybe the reason for it being hard to start, did you switch the summer/winter over on the carbi, and yeah Gemini doors are so hard to remove because all of the electrics and wiring involved, and I agree with you on no one is gunna see the welds once painted and the carpet is in, great video men, and yes its bloody cold
@haynesiest215
@haynesiest215 2 года назад
felony hole for dumping contraband haha
@rosscarter4309
@rosscarter4309 2 года назад
I've seen way worse repairs from pro shops
@GarageItYourself
@GarageItYourself 2 года назад
Ah yes, bodywork. One of the most time consuming aspects when restoring, or maintaining, a vehicle. If I'd known you were doing this I coulda popped around and shown you a few tricks for making things go a bit quicker. Either way, you ended up with a solid repair for another 40yrs of service 😉
@benwatkins1976
@benwatkins1976 2 года назад
Here's a funny little test how times in a row can you say floor pans before it doesn't like floor pans
@reecebaker4982
@reecebaker4982 2 года назад
D I G spells dig boyssss
@Rob_hsv
@Rob_hsv 2 года назад
Ultra deluxe #4?
@stephengaraway3243
@stephengaraway3243 2 года назад
What’s happening with the xy
@HackshopGarage
@HackshopGarage 2 года назад
Just waiting on the owner to have some more funds to get some more parts mate
@stephengaraway3243
@stephengaraway3243 2 года назад
@@HackshopGarage hahaha I know that feeling they have to be done right
@bruceyblowback8748
@bruceyblowback8748 2 года назад
Bite off more than you can chew, then chew like hell boys. Takes me back. In 25 years you will be watching young guys and girls doing the same to cars driven today.
@bapcorp8303
@bapcorp8303 2 года назад
Random question, what is the height of your shed?
@HackshopGarage
@HackshopGarage 2 года назад
3.0m at the walls and the peak is 4.2m above the hoist
@gazza116
@gazza116 2 года назад
bursons have heaters?
@stuartwhite172
@stuartwhite172 2 года назад
hi again fellas. is that rust from a leaky plenum or leaky door seals?
@HackshopGarage
@HackshopGarage 2 года назад
Hey mate, it doesn’t seem to be from the plenum, we think maybe the front window seal or door seals
@stuartwhite172
@stuartwhite172 2 года назад
@@HackshopGarage that's good news. I have an hr that has much worse rust in the rear floors than the front I thought it was from sitting in the weeds for 30 years but seems to be from a leaky plenum. The joys of old cars 🚗 😐
@piffiiiiiiit
@piffiiiiiiit 2 года назад
Any self-respecting teenager who owned a gem in the 90s would have had an undercut just like Nathan's 💇
@danielchristieson4209
@danielchristieson4209 2 года назад
The only way to go is up …
@alanjones99
@alanjones99 2 года назад
Guys, pff commodores n gemis are the easiest doors to remove and refit. Pop pin out pliers n hammer. 😆
@benjohnson7170
@benjohnson7170 2 года назад
Nice one lads. No close ups, eh....Good idea. Too many pro welder internet troll's out there.
@michaelnoyes4817
@michaelnoyes4817 2 года назад
hmmmmmmmmm?
@smithy2
@smithy2 2 года назад
The hinge pins suck, buy the tool and new pins makes life easier
@TomBellQLD
@TomBellQLD 2 года назад
Awesome video as always guys .. and thats a hella obscure reference all right to : en.wikipedia.org/wiki/Holes_(novel)
@NemetskyCzar
@NemetskyCzar 2 года назад
Thanks Tom
@HackshopGarage
@HackshopGarage 2 года назад
Hey mate, you are spot on, get in contact with us via our socials and we will send you out a sticker pack
Далее
It Doesn't FIT!!! - XE Build - Part 5
29:18
Просмотров 10 тыс.
Rust Repairs SUCK!! - Gemini Build - Part 7
24:44
Просмотров 10 тыс.
Дежавю, прескевю и жамевю!
00:59
Просмотров 284 тыс.
ДЖЕФ  ЕЩЕ ПОМОГАЕТ!
09:37
Просмотров 365 тыс.
Новый уровень твоей сосиски
00:33
Have we DESTROYED Nathans XE???? - XE Build - Part 1
21:07
Will This Rover P6 Run And Drive After 30 Years? | Pt.1
1:10:48
Дежавю, прескевю и жамевю!
00:59
Просмотров 284 тыс.