Getting a 1991 Camaro RUNNING For the FIRST Time in YEARS! A NEW Side Car Project! 

Glad to see another 3rd Gen will be back on the road. These are my heart

The rods are about to leave the chat

That engine sounded like it had a rod knocking. Maybe main knock.

Coming from a guy with a small block, it's not rod knock, it's a nasty exhaust leak, definitely change the oil though, the longer it sits the more it breaks down, and put some premium gas with some Lucas fuel cleaner in it and run a tank through, it'll make a world of difference

Its fantastic to see you getting a camaro to work on! your videos are actually what inspired me to buy my first project car, which is a 1983 z28 camaro. Theres a lot of work left to go, and its almost ironic to see you working on a camaro as well. Thank you for getting me into cars!

personally id change the oil and fluids and plugs to makes sure she's runing at top notch

That's my dream car! I wish I could find one just like that to restore.

I have an announcement to make.... I drove on freeway first time did good😂

3rd Gen Camaros are one of my favorites

In Germany, had a Master Sergeant, he had one of these. An RS but not under the hood! It was an Autobahn runner, made to run the Lamborghinis and big Mercedes. He open that hood, it was double Mint. All out.

Get that thing on a lift and look at the undercarriage and see how bad the rust is.

I bought mine stuck. I pulled the plugs and put Marvel Mystery oil down them. Waited a day, pulled the intake and put Marvel down and waited another day. I was able to turn it after that. Drained the oil and found a lot of water. Decided to rebuild the motor. Machined and dipped the whole thing. One head was cracked between the middle cylinders 4 and 6. Car runs great now. It had sat 17 years when I bought it.

I just bought a 89 third gen as my first car

Definetly get new relays to be in the safe side. Sounds like a manifold leak on the exhaust. Change all the fluids (oil, trans, ps, etc) Bleed the brakes Run a couple tanks of fresh gas thru it and start driving it

You should try to get a 91 with a manual they’re so good

I think it’s time you lube up them door hinges on the s10 it’s been squeaking for quite some time now lol

I guess a chevelle is next

I will bet the floors are rusted out

Bruh i got a 91 firebird that i got running after it sat for 12 years, just a future reference it is a pain in the arse to change the fuel pump

Change the fuel filter. And it's a throttle body carb. Look in the top and make sure both injectors are squirting.

You should finish one project but I like projects so you do you

Last time i saw one of your videos you had got your first truck and was fixing the shed in the backyard

Ceep up the hard work

I like watching your videos but I wish you would finish a build all the way thru instead of jumping around so much

It's got a nasty exhaust leak.

My dad has the exact same but red interior but someone crashed it so now it’s just sitting in my backyard

God damn I love those cars, I had an 87 iroc z a couple years ago and crashed it :( I’ve been wanting another ever since

Cool my dad just bought a 1989 Chevy comaro it’s his dream car and it’s rust free

Changing the plugs would make it a whole new machine

Throw some sea foam in her clean the motor out

I had a 86 z-28 like that they a lot fun to drive

NO WAYY right after I get my 88 white iroc my favorite car RU-vid also makes a video on a white third gen couldn’t be happier

Love the bloodstains on the hood😍😂

Sound like its got a cam? Thats an exhaust leak my freind and its running like trash. Plenty of potential though

Personally I’d change all the fluids put some berrymans b12 Chem tool in it to clean the fuel system then put it on jack stands and check over everything

Let's Get It

What happened to that project boat

You should use carb and choke cleaner to start engines instead of starting fluid it works the same just isn't hard on the engine.

Moto migs what happened no more videos?

Dude. Negative cable goes on last and comes of first. Coild be bye bye alternator

So what happened to the fire truck

The pete davidson we have at home

Great car

Early gang😈

Your pops has a SCAG great mower

vasily builds and moto migs should have a collab!!!

Honestly I wouldn't put any money into it. That thing Is going to need a whole floor pan better off buying a good body and swap parts. That thing is unsafe to be on roads

You need to forget the firetruck project and put you time and money in the cars how practical is a firetruck If you can't drive it on the road? Whatever you do i belive you will make the right choice.

Keep it i daily mine love it

I don’t understand why you took tryed to loosen the bolt on the pulley. All u needed was a half inch breaker bar on the actual tensioner to take the spring tension off and u would of had the belt off without breaking any bolts. Also that motor either has absolutely no exhaust gaskets or it’s got a rod nok

That was way too much starter fluid. Thats why the flash back

Make sure that car is taking care of never sell it

Where are you located at? There seems to be more rust/ corrosion in your area.

All the internet mechanics 🤣

Getting famous off comments day 179, hope everyone has a wonderful day and hope you accomplish what you want to accomplish🤙🚀🤙

Hey man how are you doing? We all miss you hope your doing good

Please paint the inside frame engine bay and outside of the corvette

Why haven’t u been posting

Haven’t posted in a while I hope he’s doing alright. I miss seeing his go kart and dirtbike videos

Where is he

You need to find that exhaust leak

Yessir

Where are you come back

Omg I just got a 89

Is it throttle body injection

Hi

That engine does not sound great at all 😕

Check the fuel pump

Make a part 2 plzzz !!!!!

you should put a good motor in it

Hey put some fuel stabalizer in there

U do know if u use starter fluid too much the engine will get addicted to it and sometimes not want to start without it

I think she’s a junker 🤣😂

ayeee

Why haven't u uploaded sir

Car is not knocking . Sounds like manifold gasket or flange gasket

Dont use wd40 use marvel mystery oil

Well Camaros have been around my family for a little bit in the past my brother had in 86 IROC Z and 85 and in 92 the 92 which I bought oh, I also currently have a 74 second generation that doesn't sound like a cam that sounds like the lifters are shot, LOL and why were you trying to take off the tensioner pulley? To remove the belt you use a breaker bar inserted into that little square hole remove the pulley hey, don't take the pulley off, you Noobs! That poor thing so Rusty and crusty oh, good luck let me know if you need any parts I might have a few extras left laying around the garage. I don't remember what LOL

You don't put WD40 down the cylinders

Take the flow masters out of that v6

Motor time

500th like

HI

It sounds like there is water in the gas

Big dreams. That camaro is too far gone.

Hilo

Try putting gas in the carb

Why hasn’t he posted in like 5 months ,?

Less starting fluid

That thing is junk

DO NOT USE STARTER FLUID IT WILL DEPEND ON IT TO START AND GET ADDICTED TO IT

Using that much starting fluid is idiotic you were literally drenching it no wonder why it caught fire.

She dont sound healthy