GETTING FUELED UP WITH BOYD WELDING | Installing the fuel tank in our 2wd Squarebody Blazer

Подписаться 100 тыс.

Просмотров 29 тыс.

50% 1

In this video, we're getting fueled up with our new Boyd Welding tank for our 2wd squarebody blazer, UBTK5. This was the last piece of the puzzle before we carted the rolling chassis up to Oakboro, NC for the C10 Fall Revival on October 26th. Hope you enjoy!
You can purchase your c10, blazer, f100 or classic truck all-aluminum fuel tank by visting www.boydwelding.com
UBTK5 playlist (suspension & teardown): bit.ly/2MnpZRm
Get Your UBT Shirts/Decals/Hats HERE: bit.ly/2JPDFCb
If you want to send us a care package, please use this address:
UNITED BY TRUCKS
1000 Whitlock Avenue NW
Suite 320, PMB 171
Marietta, GA 30064
#UnitedByTrucks #UBTK5 #BoydWelding

Авто/Мото

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@fishandgameman Год назад

Maybe it’s been mentioned, but after lining up all the holes, welding the nut to the top of the frame rail would really make removal and installation super easy. Not that there’s a huge need, but for easy access for a gear change would be nice.

@joshroland 4 года назад

A Boyd's tank is definitely on my list. I have champagne taste on a beer budget lol. Looking good.

@UNITEDBYTRUCKS 4 года назад

Haha i understand that.

@blair384 4 года назад

We are gonna need some stickers and shirts with the k5

@UNITEDBYTRUCKS 4 года назад

Yes sir!

@ericsgarage8634 4 года назад

Keep up the Great work, the Chassi and the Components your using look great. That Rim and tire combo is really eye catching.

@UNITEDBYTRUCKS 4 года назад

Thanks!

@pedroguerrero7718 4 года назад

Man it's looking nicely good every day..keep the good work guys.

@UNITEDBYTRUCKS 4 года назад

Thank you!

@baggedmazda666 4 года назад

When you blow it back apart grab some loctite 545 and use it instead of the Teflon tape let it cure a couple days before adding air to the system but stuff works amazing

@UNITEDBYTRUCKS 4 года назад

Good suggestion. This is in the fitting at the top of the bag.

@baggedmazda666 4 года назад

Use the stuff on all fittings it’s a liquid that cures in the absence of air. The excess wipes off for a super clean look. I keep a small bottle in my glove box but haven’t had to use it and my truck see’s tons of miles when it’s nice out

@biglon62 4 года назад

Nice fuel tank real quality !!

@UNITEDBYTRUCKS 4 года назад

Yes sir!

@gasratzcustoms 3 года назад

Yeah this tank looks awesome

@MTJ1986 4 года назад

Very good looking tank but outside my price range for my burb. Would be scared to see how much it would cost me for a 40 gallon tank.

@UNITEDBYTRUCKS 4 года назад

Yeah, that would be a big tank

@MTJ1986 4 года назад

Either way keep up the good work so I can steal other ideas from y'all!

@UNITEDBYTRUCKS 4 года назад

@@MTJ1986 haha

@paintgunexpress1949 4 года назад

SMASH SMASH SMASH THAT THUMBS UP 👍👍👍👍👍👍👍👍👍👍👍👍 UBT #1

@westonlee9778 2 месяца назад

Appreciate your video I’m about to install about tank as well. Did you rub a metal gas line? Could I get some info regarding your air bag system, where did you buy it and other modifications you did to your suspension? Thanks!

@peggypatton9170 4 года назад

Love how you are showing people they can do this in there driveway and it looks good

@UNITEDBYTRUCKS 4 года назад

Thanks! Too bad the city is putting a stop to me doing this in my driveway. smh

@SweetHomeDelights 4 года назад

This video is very attractive and so beautiful...

@CRXSLY 4 года назад

for me gaz tank goes in between frame rail not under (more space clairence on the ground, no tank fall down if something append )...but this just me! keep the good work! :)

@UNITEDBYTRUCKS 4 года назад

A thousand ways to skin a cat. We mounted this one for easy access to drop if necessary. We did it this way on Teddy and have gone thousands of miles with no issues. That said, we could pull the bed on it if we needed, but I'm not pulling the body on a blazer once set. Mounted on the bottom, it is. :)

@trashbandit2449 4 года назад

That seems like a pain to get in and out if needed

@superc4308 4 года назад

That frame turned out killer guys looking sick man C.H.E.V.Y 4 life 👍🏼👍🏼👍🏼👍🏼🔥🔥🔥🔥

@UNITEDBYTRUCKS 4 года назад

Thank you!

@chinoc102 4 года назад

Doing the same tank on a build. For future reference try Krylon 7513 it works super well satin black one application when you're painting your frame and suspension parts great job you're doing

@UNITEDBYTRUCKS 4 года назад

Yup, typically what I always use, but I didn't realize how completely out of it I was until day-of. Had to make do with Auto Zone rustoleum.

@OldeCarrGuy 4 года назад

No tie rods connected up front? Nice looking take! It's all coming along nicely!

@UNITEDBYTRUCKS 4 года назад

Nope. No steering components at all. Having to redo my driver upper control arm to clear everything. Thankfully MMW is taking care of us.

@carguy4v2222 4 года назад

The UBT K-5 is coming together right on time can't wait to see the body on the frame it's gonna be somethin to see!!! Good job on install went right together like was supposed to!!! Just makes it easy to work on later too!!!

@UNITEDBYTRUCKS 4 года назад

No doubt about it!

@RustyWrenches 4 года назад

Boyd makes really nice tanks. I love mine.

@UNITEDBYTRUCKS 4 года назад

Yes they do!

@gasratzcustoms 3 года назад

Just sent you a message

@johndudley5987 4 года назад

UBTk5 chassis lookin good. And that Boyd tank has everything you need and looks good doing it.

@UNITEDBYTRUCKS 4 года назад

Yes sir!

@pauldietrich478 4 года назад

I mounted my tank on upper side of the lower frame rail. I figured the tank is then setting on the frame rather than hanging by the bolts.

@UNITEDBYTRUCKS 4 года назад

Yep, I considered that when installing on Teddy, but decided it would be too high, so we're going the same route on the k5. Have you checked the clearance on yours with it on the top side? It's also easier to drop from the bottom should I need to.

@lskiller1903 4 года назад

@@UNITEDBYTRUCKS It most definitely will be easier to drop hanging off the bottom of the frame rail. Have you considered welding the bolt heads to the frame on the top side. It appears it will be a pain to get a wrench inside the frame rails to remove the bolts if you ever need to drop the tank with the K5 body mounted on the frame. Excellent job on the build, y'all gonna have a top notch K5.

@toddgillatpoorboyzcustoms5689 4 года назад

Getting closer and closer can't wait to see finish product. Keep the videos coming.

@UNITEDBYTRUCKS 4 года назад

Yes sir!

@oldcroneysgarage9739 4 года назад

Have you found out what engine you're gonna put in it?

@UNITEDBYTRUCKS 4 года назад

Yes sir. 5.3/6L80e

@oldcroneysgarage9739 4 года назад

@@UNITEDBYTRUCKS I guess you like ls engines? I like 350s no computers on 350s

@cameronbrewster7348 4 года назад

That fuel cell's shining like a diamond in a goat's butt😆 Looking good Robbie!

@UNITEDBYTRUCKS 4 года назад

haha thanks!

@shanewright6958 4 года назад

Another great video 👍👍

@UNITEDBYTRUCKS 4 года назад

Thanks, Shane!

@gasratzcustoms 3 года назад

Love this tank, we need a tank for our 74 C10. Yall happy with this tank? I have been checking out their products!

@UNITEDBYTRUCKS 3 года назад

Totally! We run them in all of our trucks. They are primo!

@robgrant9583 4 года назад

"Tanks" for showing the installation of the tank. The frame looks good laid out.

@UNITEDBYTRUCKS 4 года назад

haha thanks

@robgrant9583 4 года назад

@@UNITEDBYTRUCKS You're welcome

@DIYWithTheRichardsons 4 года назад

Nice tank bro I'm going to check them out for my C10 tank

@UNITEDBYTRUCKS 4 года назад

Please do. They're the best in the biz.

@voodstoc 4 года назад

I bought one for mine. It made my fuel system so much easier to get right. Not the cheap option, but worth it.

@DIYWithTheRichardsons 4 года назад

@@voodstoc yeah they like $700

@jerredwayne8401 4 года назад

Sorry if I miees it in the video but what does this exact tank go for?

@UNITEDBYTRUCKS 4 года назад

Price-wise? Check out www.boydwelding.com for you application.

@jerredwayne8401 4 года назад

Apparently I fat fingered my spelling but thanks for the link

@jerrytaylor2276 4 года назад

How many gallons it holds

@UNITEDBYTRUCKS 4 года назад

19, i believe

@tiborbakhuis 4 года назад

Cool project ! Can’t wait to see the end result.

@UNITEDBYTRUCKS 4 года назад

Thank you! We're pumped.

@chadprice4462 4 года назад

I was wrong it's on the passenger side sorry

@jjaimevillalobos1118 2 года назад

Where did you order this from ? What about fuel lines tia

@19ADAM80 4 года назад

👍🏼

@стройка-й8щ 4 года назад

Супер! Привет из России

@chadprice4462 4 года назад

Question how many gallons is that fuel tank and also shouldn't the filler neck be on the driver side

@UNITEDBYTRUCKS 4 года назад

You know, I think it's 19 gallons but I'll have to doublecheck.

@pistoreroloco 4 года назад

What wheels are those????

@UNITEDBYTRUCKS 4 года назад

Detroit Steel Wheel Delrays

@genelgreiner 10 месяцев назад

Looks great! I would love this tank for my 4x4 K5 - do you know if that area of the frame is the same on a 4x4 in comparison to your 2WD?

@UNITEDBYTRUCKS 10 месяцев назад

I don’t actually but I’m unsure why it would be different. Both leaf sprung vehicles in the rear so my thought is it would work.

@PETERGAGAH 4 года назад

What option is recommended for the fuel level sensor as far as OHM?

@UNITEDBYTRUCKS 4 года назад

Just depends on what your gauge wants to see. I think there was a split in the years across 67-72 (i think) for the factory ohmage, but if you're running aftermarket gauges, they will tell you what ohm their gauge requires.

@djazzy1016 4 года назад

Hey Robbie, got the same side fill tank for my C10. Fits perfectly and thanks for the recommendation. I don't know where the fill neck comes out on UBTK5 so do you have content where you're plumbing the fuel fill coming out? Not sure how I'm gonna do that when I put the bed back on. Thanks man. Really enjoy your channel!

@UNITEDBYTRUCKS 4 года назад

Thanks, Daryl! We will have some content on that coming soon, but, on the blazer, we are using the factory filler set-up for a blazer.

@djazzy1016 4 года назад

@@UNITEDBYTRUCKS I really appreciate that you take the time to answer most of your subscribers. Has to be difficult as your channel grows (like signing glove boxes!). Thanks again.

@UNITEDBYTRUCKS 4 года назад

@@djazzy1016 haha it has become increasing more difficult but I try my best to carve out time each day to respond. UBT wouldn't be anything without you guys!

@antoniojackson1976 4 года назад

Great work👍👍👍👍👍

@UNITEDBYTRUCKS 4 года назад

Thanks!

@DaRealArtist 3 года назад

Nice work. Do you have any videos of routing the fuel lines and connections?

@MrScaredsh1tless 3 года назад

Just got my tank for my 74 In I can’t wait to put it in!

@Krusty_Big10 4 года назад

How many gallons is this tank?

@UNITEDBYTRUCKS 4 года назад

I think it's 19 gallons

@jshenton64 4 года назад

Did you order the tank straight from Boyd Welding as a one off order? Or did you get if from somewhere else? I just started to rebuild a 76 step side and want to relocated the tank to the rear.

@UNITEDBYTRUCKS 4 года назад

Direct from Boyd. Shoot them an email or give the me a call and they will get you fixed up.