Тёмный

Give your Arduino project a chatGPT AI brain - for ALMOST free 

Programming Electronics Academy
Подписаться 222 тыс.
Просмотров 304 тыс.
50% 1

🤩 Check out this Free Arduino Course 👇
bit.ly/get_Arduino_skills
Want to learn more? Check out our courses!
bit.ly/ChatGPTuino_Sneak_Peak
_/\\\\\\\\\\\\\_____\\\\\\\\\\\\\\\_____/\\\\\\\\\___
\/\\\/////////\\\_\___\\\///////////_______/\\\\\\\\\\\\\_
\/\\\_______\/\\\__\/\\\____________/\\\/////////\\\
\/\\\\\\\\\\\\\/___\/\\\\\\\\\\\_____\/\\\_______\/\\\
\/\\\/////////_______\/\\\///////________\/\\\\\\\\\\\\\\\
\/\\\_____________\/\\\______________\/\\\/////////\\\
\/\\\_____________\/\\\______________\/\\\_______\/\\\
\/\\\_____________\/\\\\\\\\\\\\\\\____\/\\\_______\/\\\
\///_______________\///////////////_________\///________\///_
We designed this circuit board for beginners!
Kit-On-A-Shield: amzn.to/3lfWClU
FOLLOW US ELSEWHERE
---------------------------------------------------
Facebook: / programmingelectronics...
Twitter: / progelecacademy
Website: www.programmingelectronics.com/
**About Us:**
This Arduino lesson was created by Programming Electronics Academy. We are an online education company who seeks to help people learn about electronics and programming through the ubiquitous Arduino development board.
**We have no affiliation whatsoever with Arduino LLC, other than we think they are cool.**
00:00 Introduction
00:12 Project Overview
00:35 Project Map
01:23 Actual Demo
02:09 We've made contact...
02:48 Existential AI fear...
03:08 Software Overview
04:08 Library Specifics
04:50 Earn 1 Gold Coin $$
05:19 Best Arduino Video yet...

Опубликовано:

 

17 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 290   
@programmingelectronics
@programmingelectronics 10 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@knms6fdakshinbarathisarava107
@knms6fdakshinbarathisarava107 7 месяцев назад
sir can you tell we can do on esp8266
@judgeworks3687
@judgeworks3687 Год назад
I used chatGPT to write arduino sketches for a few projects, last month but haven’t had a chance yet to see if the code works (it was for some art installation projects). If the code does work I’m extra appreciative as the chatGPT also explained the code and how is works in natural language. Also I asked chatGPT to explain how to safely wire the hardware (lights, motor etc) and it walked thru those directions too. Again I haven’t checked the code and builds yet to see if they work-hopefully later this month.
@programmingelectronics
@programmingelectronics Год назад
Very cool! It is an amazing new tool. I did some very preliminary testing, and was impressed - not to say it's perfect - far from it.
@stalincat2457
@stalincat2457 Год назад
Yeah I am planning to use an arduino to listen in on the communications of an old, pre-obd car. Ofcourse this is a nightmare of a first project so I hope GPT-sensei can help me trough it.
@programmingelectronics
@programmingelectronics Год назад
@@stalincat2457 cool project!
@jsmythib
@jsmythib Год назад
chatGTP changes SO MUCH. I still cant believe how well it writes simple, specific code on request. It even generated ascii art for me inside a script(I know its weird!). I want more. Even if my own fate rests in the legacy bin :)
@Norfeldt
@Norfeldt 8 месяцев назад
Nice project 🎉 did you choose to do it in C++ because it had the needed libraries, or speed or preferred language instead of microPython?
@andrusalev8987
@andrusalev8987 Год назад
Hi ! I use Teknic Clearcore with extension board for my project. It have industrial quality 24V inputs/outputs. Asked Chat GPT to generate code in C to use switches to turn on/ off leds / outputs using arrays and debounce. I got code, need to rename IO names, added some setup lines and code worked. Used Arduino UI. Of course, there is much more to do in this particular Clearcore controller program, but AI is jawdropping.
@programmingelectronics
@programmingelectronics Год назад
Pretty amazing Andrus! I'm excited to see how it develops further.
@SashaSasha-tt1jc
@SashaSasha-tt1jc 11 месяцев назад
NO WAY! LITERALLY HAVE THE EXACT SAME KEYBOARD, LIKE YOU!
@gregmansker6176
@gregmansker6176 Год назад
I really enjoyed the live podcast we (you) had about this. Not sure I see the advantage to this set up other than the size and the fact that it could be done. It would help me more if I could talk to it and get the written answer back. with out a doubt I need to get in and try it more.
@programmingelectronics
@programmingelectronics Год назад
Thanks Greg! So here's what I'm thinking...as you said - not very practical as is, but I want to explore connecting the response in some meaningful way to an output on the Arduino.
@seowithkm
@seowithkm Год назад
This is amazing. Reminded me good old days of engineering school. I'll give it a try.
@programmingelectronics
@programmingelectronics Год назад
Thanks Kamran!
@qba51c
@qba51c Год назад
is it using local php server post/get ? or build in php web server..? or esp32 wired as handler, just string exchange only
@robertrobert5583
@robertrobert5583 Год назад
That's brilliant. I had an idea that I would have to learn java script to use the api so I am looking forward to seeing how you used c++ / arduino. Might be able to use a SIM module to go totally mobile too.
@programmingelectronics
@programmingelectronics Год назад
Thanks so much! Love the idea of using a SIM.
@somerandomchannel382
@somerandomchannel382 Год назад
IS there complete info how to setup this chatgpt thing? What to buy, how to connect the cables, the code to run, etc? Watching this tutorial I see at least 5 different components, which ones are they, how to buy them? And instructions to setup everything would really help people with no code knowledge how to get this started.
@bieltorres1815
@bieltorres1815 Год назад
the code please
@patdowling5
@patdowling5 Год назад
Really enjoyed this video - the format here is excellent 👌 especially the run through of the idea and then straight to the breadboard ! Great stuff - greetings feom Ireland - ps the podcast is fantastic too 👍 Pat
@programmingelectronics
@programmingelectronics Год назад
Thanks Pat!!
@delphicdescant
@delphicdescant Год назад
wow a slightly different flat blue pfp
@ridwanmulyana99
@ridwanmulyana99 Год назад
I want to try something more advanced with my project idea. The concept is to enable the ESP32 to respond to voice commands, eliminating the need for typing. The output will be played through a speaker via the RobotDFPlayer module. If integrated into a vehicle, it will resemble KITT, the famous car from the show "Knight Rider
@programmingelectronics
@programmingelectronics Год назад
That’d be great! A real life KITT!!! I was kicking around a voice interface as well…
@bryanhumphrey3377
@bryanhumphrey3377 Год назад
I'm looking to do the same for a different project i have been using the DFrobot Speech Synthesis module which has worked well
@michaelcheich2481
@michaelcheich2481 Год назад
@@bryanhumphrey3377 very cool!
@DIYRobotGirl
@DIYRobotGirl Год назад
I just watched this video, again. Since, the last time I was here there has been some changes. Watching the keyboard and the screen setup. I was thinking about the Adume Movi Speech synthesizer and how it could replace the keyboard and screen. I think it would be cool with the Movi and chatgpt3. I just wonder if the chatgpt would interfere with the code or any previous machine learning code implemented already in the syntax. I mean it would be cool to have chatgpt but still need code for array of servos, led, and ultrasonic sensor and sound sensor in addition to Movi. Then, would chatgpt block any of that. I don't know.
@alexandrealekseev2207
@alexandrealekseev2207 Год назад
Hey, really like this project, thanks for sharing ! Is there a component that could register voice commands instead of typing them on a keyboard ? Thank you :-).
@programmingelectronics
@programmingelectronics Год назад
This is a great idea Alexandre, and we are definitely looking into a cost effective implementation of voice to text.
@Dqrnan
@Dqrnan Месяц назад
Great info, Thank you. Next step, make it recognize voice, and respond in audio.
@Bianchi77
@Bianchi77 9 месяцев назад
Nice video, well done, thank you for sharing it with us :)
@programmingelectronics
@programmingelectronics 8 месяцев назад
Thanks! There is a link in the description I think for all the code of the finished project. Currently working on a chatGPT library for Arduino - should be fun!
@buntybublee4616
@buntybublee4616 Год назад
Dude this Idea is really amazing
@programmingelectronics
@programmingelectronics Год назад
Thanks! Next version coming out soon! A bit more polished.
@meetsuhalder7735
@meetsuhalder7735 Год назад
Plzz bring a full video about the connections
@rT1WdisPtX
@rT1WdisPtX Год назад
WHERE WAS THIS VIDEO WHEN I NEEDED IT THE MOST UGGHH
@DIYRobotGirl
@DIYRobotGirl Год назад
The point is, can we get the chatgpt to write code directly into the ide. This means if we have an event based system, let's say either for led or servo connected either esp32 cam or ultrsonic sensor. Which means that when triggered, chatgpt would respond with a new code. More awesome chatgpt could be hands free type of voice assistant like alexa with this system.
@DesertVox
@DesertVox Год назад
OTG programming is possible in ESPs.
@Mike196
@Mike196 11 месяцев назад
This is an amazing idea
@smokeysky
@smokeysky Год назад
please stabilize the camera, it is make me nauseous xD but i love the video!
@biogreenz6613
@biogreenz6613 Год назад
When are you going to release the code and schematics? im really looking forward to testing this out! how large is the code and how much flash and sram is used? curious to know if it will work on lower end esp32 without asmuch sram and flash
@programmingelectronics
@programmingelectronics 7 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@hungdepzai
@hungdepzai 11 месяцев назад
Dudeee, that's help me a lot, thanks. Can you replace the keyboard for the micro and the display for the loudspeaker so it can talk to you like siri.
@Kumodot
@Kumodot Год назад
It would be nice to have a ChatGPT terminal implemented as a kind of REtroarch Core so it could run in Retropie emulator frontend as a "game" with CRT filters and such to put it like a cool cyberdeck chat bot. 😂
@biogreenz6613
@biogreenz6613 Год назад
i see your using the FeatherS2 - ESP32-S2 Feather Development Board, is there any drawbacks to using other boards. i noticed the memory is bigger on the version vs some of the others and was also wondering if that makes a difference on this specific project. also i thing if the nextion displays could be programed with this that would be even better as you can use photoshop to make custom displays with many cool features easy. i want to start this project i just dont know whats the best esp32 to buy. this version by adafruit you are using is about 40$+ online currently. fantastic work and i hope to see this integrated into a watch one day :). maybe use two oled screens to display twice as much? i seen some esp32 with oled build in and wondering if that would be a good rought
@programmingelectronics
@programmingelectronics Год назад
Great questions Bio Greenz! I used the Unexpected Maker Feather S2 mostly because that is what I had lying around, and I’ve found it’s a great dev board for the esp32 because it usually connects well with my IDE and uploads consistently, plus it has the integrated power Jack for using a lithium battery which I really like. I think you’re right on the display, that’d be neat. I’m familiar with the oled library so I went with that.
@biogreenz6613
@biogreenz6613 Год назад
@@programmingelectronics thank you for the valuable feedback. sounds like battery connection is super handy. after a lot of research the feather s2 is the way to go but should work on cheaper esp32 as well. i hope to order one soon to test it out. i was able to get ps2 keyboard working through arduino nano and compostie out from nano but not together. been hoping to type on tv screen but it looks like vga is better than rca composite. getting the code to work with chat gpt is amazing when it works but i haven't had any luck combining keyboard and tvout cause of code compiling issues. thanks for the great inspiration! wnded up hacking 2 keyboards :)
@programmingelectronics
@programmingelectronics Год назад
@@biogreenz6613 I am finishing up the current version - and am playing around with the idea of adding a voice synthesizer as well. Someone in the comments mentioned the DFRobot gravity voice synth, and I bought one so I'll be trying to add that in addition to the oled output.
@biogreenz6613
@biogreenz6613 Год назад
@@programmingelectronics cant wait to see, working on a few projects myself, one with plants. i seen a few voice modules that might be of possible benefit to your voice control project on electronicnoobs channel. i see your project as possibly revolutionary cause it would be probably the lowest power needed to run chat gpt from home. i want to see it on a watch with voice 100%. that will bring everyone into the future i think. that would literally redefine smart watch. im sure it will be integrated into iwatch ect but homebrew is where its at and thank you for leading the way!
@programmingelectronics
@programmingelectronics Год назад
@@biogreenz6613 Thanks for the recommendations!
@sarvajithpradeep4866
@sarvajithpradeep4866 9 месяцев назад
can you say what all pressers would work for this with there purchase link
@vanillatwilight1738
@vanillatwilight1738 4 дня назад
Sir, what did you use to connect the ps2 keyboard on the esp32 s2?
@programmingelectronics
@programmingelectronics 3 дня назад
I have the the PS2 go to a PS2 to USB adapter which I then connect to a USB breakout board. This post has the circuit layout: www.programmingelectronics.com/chatGPT-terminal/
@unknownxdavid4579
@unknownxdavid4579 Год назад
U can add voice text api so the big keyboard can be removed
@aarriikknn33ll
@aarriikknn33ll Год назад
Great video! This is extremely usefull for my robotic projects
@programmingelectronics
@programmingelectronics Год назад
Thanks Arik!
@chelegance
@chelegance Год назад
very informative, thank you! Can the arduino code(API) part generated by chatgpt though?
@programmingelectronics
@programmingelectronics Год назад
You could try for sure! It would be interesting to see if it could right the API call - or at least help you get started.
@dragonsage6909
@dragonsage6909 Год назад
Great idea, excellent episode.. Thx
@programmingelectronics
@programmingelectronics Год назад
Thanks!
@NikoKun
@NikoKun Год назад
This is neato, gonna have to try this myself later, if I still have any developer credits on OpenAI, but last I checked, it looked like I had zero.. I've been doing projects like this, with a Raspberry Pi Pico lately, pretty fun little devices to work with.. Tho I have to say, the lack of storage and RAM is quite a challenging constraint to work within, especially if working with what MicroPython leaves left-over. :/ I wonder if a Raspberry Pi Zero W could work for a voice-operated AI Home Assistant using ChatGPT, if I wire a little mic & speaker to it or something.. I got a couple old ones lying around that might be better for the purpose than any microcontroller, as far as I'm aware.. heh
@programmingelectronics
@programmingelectronics Год назад
Thanks! Yes, I may be reaching for Pi to get things like smooth voice-to-text and a clear sounding voice response.
@cloudyfloss
@cloudyfloss Год назад
What did u use to connect the keyboard cable to the breadboard?
@programmingelectronics
@programmingelectronics Год назад
A USB breakout like this: www.amazon.com/Breakout-MELIFE-Adapter-2-54mm-Pinboard/dp/B07W7XMV3W/
@HappyHermitt
@HappyHermitt 4 месяца назад
On an arduino nano, I need a servo triggered and led to go high when a pir or ultrasonic sensor is triggered. I need the servo to stop, or add a lond delay instead of looping. Its a booby trap for backyard racoons thst sre lil terrors. The servo is pulling a party popper. I might even double the servo if it works. Do I just ask and include the pin numbers?
@programmingelectronics
@programmingelectronics 4 месяца назад
Sounds like a fun project! You'll need to select pins that are PWM enabled for your servo control. Also, you'll probably want a separate 5V power supply for the servos instead of trying to power them through the Nano. Best of luck!
@--JYM-Rescuing-SS-Minnow
@--JYM-Rescuing-SS-Minnow Год назад
sounds like U'r making a link controller. good luck!! it looks super portable!! kids should love this!! thanks!! good luck all !!
@programmingelectronics
@programmingelectronics Год назад
That would be cool! Thanks!
@marcusgarvey3416
@marcusgarvey3416 Год назад
Would it be able to do something like this with a dstike deauther watch? As an extra feature.
@programmingelectronics
@programmingelectronics Год назад
That'd be neat!
@BlueeBubble
@BlueeBubble 3 месяца назад
Hey, is it possible to have ai and Arduino do a real time voicr synthesizer? Be able to record voice and then upload online to ai and be able to repeat the same voice back?
@uRealReels
@uRealReels 2 месяца назад
thank u for that comment. did u figure it out? i had thought of the same, but now i realize that this is not as easy as i expected
@The.2.Minute-Man
@The.2.Minute-Man Год назад
Hi from Aussie really enjoyed your video the only thing I would ask is no back ground music .... Liked
@no.one.4
@no.one.4 11 месяцев назад
Can you replace the keyboard with a microphone, and the screen with a speaker? That would be awesome
@augustinho0desing
@augustinho0desing Год назад
omg, I wish I had that as a toy when I was a kid, it would have been the coolest thing ever!
@programmingelectronics
@programmingelectronics Год назад
I agree - it's a ton of fun!
@billyjack8130
@billyjack8130 Год назад
This is how we get Cylons
@programmingelectronics
@programmingelectronics Год назад
And so it begins :)
@user-wh2fo1yh6f
@user-wh2fo1yh6f Год назад
How to connect the keyboard with the breadboard
@Viky2594
@Viky2594 10 месяцев назад
This could make for an awesome cyberdeck!
@vanishedinstrange2375
@vanishedinstrange2375 Год назад
What components where used?
@echoko264
@echoko264 Год назад
How about voice assistant to chatgpt can we connect to arduino?
@RAJTECHTAMIL
@RAJTECHTAMIL Год назад
I need mcp4022 digital potentiometer with arduino uno how to control. Please argent
@dammitbobby283
@dammitbobby283 Год назад
Fill your screen full of text without any blank spaces and then count the characters, for example, 50 characters. Now when you create a prompt for ChatGPT tell it to give you an answer in less than 50 characters. Example, Prompt = what is an apple in less than 50 characters Answers: 1) Fruit, round, red or green, juicy. - 34 characters 2) A fruit with many colors and flavors. - 36 characters 3) Fleshy fruit with seeds, edible. - 31 characters 4) Pome fruit, crisp, sweet or tart.- 30 characters .
@programmingelectronics
@programmingelectronics Год назад
Great idea Jim! I, and other developers, have definitely had this on our mind. Believe it or not the chatGTP 3.5 turbo API isn't consistently capable to limit it's response to a set number of characters or words - it will ignore, or blow right past it. It looks like, however, that chatGTP 4 IS able to do this, so once that API is made available to more folks, I'll likely be using it here.
@pradeesh672
@pradeesh672 Год назад
Sir can use a voice input instead of keyboard
@buntybublee4616
@buntybublee4616 Год назад
i am really a fan so I will be waiting to try it hopefully soon
@Stelio_Contos
@Stelio_Contos Год назад
Love it, this is perfect, Okay, Idea pitch, bear with me here. Dave Bennett (another RU-vidr) did a video on how to make a ChatGPT smart speaker using strings of code just like you are, now, I'm trying to combine what he did, with what you have here. But then, I want to hook that up to one of those 3 Axis talking Skeleton heads, to create a talking Skeleton head with the brain of ChatGPT. Thoughts?
@programmingelectronics
@programmingelectronics Год назад
Hey Cory, very cool! I've been kicking around a similar idea as well. There are some neat projects online of 3D printable eyes that can be controlled with minimal servos, and I thought that be fun too. Where I really want to go is to get chatGPT to respond to spatially relevant inputs with specific commands so as to move a robot around. That's where I plan to go next with this.
@A7AtabVeto
@A7AtabVeto Год назад
Amazing enjoyed it 😍, what about using tiny microphone as input instead of keyboard!
@programmingelectronics
@programmingelectronics Год назад
That's a great idea - thanks!
@gowthamsakthi2339
@gowthamsakthi2339 Год назад
I'm from India in tamilnadu....this very use full...please send your circuit diagram and coding
@idkMEMEME_
@idkMEMEME_ Год назад
can you do that with the google text to speech ? that would be cool ai. btw love your videos
@programmingelectronics
@programmingelectronics Год назад
Thanks Kaizen! Yes, I agree it would be neat to go from speech to text and and then get responses as speech too!
@jamescullins2709
@jamescullins2709 Год назад
Great job is this included in you course?
@programmingelectronics
@programmingelectronics Год назад
Thanks James! Not yet, but we are kicking around spinning it up into a full blown course that walks in detail through the implementation.
@THEOGGUNSHOW
@THEOGGUNSHOW Год назад
Sweet!
@rroughh
@rroughh Год назад
Technically you could do this with voice activation, and have it respond in any voice you want. in b4 someone does exactly that.
@abhayganesh6364
@abhayganesh6364 Год назад
Hii bro Can u do it by chancing the oled display with speakers
@programmingelectronics
@programmingelectronics Год назад
Yes, I have a voice synth module I think I’ll be adding
@cbelldor
@cbelldor Год назад
Hi. Thanks for this video. Did you poste the code somewhere? Please, where do I can find this code?
@programmingelectronics
@programmingelectronics 7 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@b58-chaitanyasapkal68
@b58-chaitanyasapkal68 Год назад
May I know the connection and coding detail of this project?
@kkishork
@kkishork Год назад
Bro how to build the chat server using raspberry pi?
@anthonyrickardii6198
@anthonyrickardii6198 10 месяцев назад
Awesome! Is it possible to use a regular Arduino uno?
@programmingelectronics
@programmingelectronics 10 месяцев назад
You could use a UNO R4 WiFi, you just need a board that connects to the internet, and it would take a little code rework.
@anthonyrickardii6198
@anthonyrickardii6198 10 месяцев назад
@@programmingelectronics will the Xbee wireless work for this alongside with the arduino ?
@programmingelectronics
@programmingelectronics 9 месяцев назад
@@anthonyrickardii6198 I do not believe Xbee is normally used to connect to a WiFi access point, but I could be wrong.
@edkennedy1166
@edkennedy1166 Год назад
Fantastic project, thank you. Can you share the code and parts list for this project? Also, can you show/discuss the process of signing up for a Developer Account and getting a key?
@programmingelectronics
@programmingelectronics Год назад
Definitely will Ed! I am getting the code up to speed for the most recent chatGPT api.
@edkennedy1166
@edkennedy1166 Год назад
Awesome, I look forward to it.
@bimokayoba
@bimokayoba Год назад
@@programmingelectronics did you share the code yet? please im curios to try it
@vaishnavibywar620
@vaishnavibywar620 11 месяцев назад
@@bimokayoba if the code is ever shared pls pls pls let me know too
@bimokayoba
@bimokayoba 11 месяцев назад
@@vaishnavibywar620 still not shared :(
@brodsfeet8154
@brodsfeet8154 7 месяцев назад
Thank's sir!!!
@programmingelectronics
@programmingelectronics 7 месяцев назад
Thanks for watching!
@Slothman49
@Slothman49 8 месяцев назад
Can you do a how to video plus code please
@joshgilbert6749
@joshgilbert6749 Год назад
ChatGPTuino wowwww pretty cool :)
@programmingelectronics
@programmingelectronics Год назад
Thanks Josh! More to come on this for sure!
@PeterRichardsandYoureNot
@PeterRichardsandYoureNot Год назад
Get the arguing to be programmed by the openai api interface so that it will RE-program the arguing on the fly. Then we can start talking skynet.
@programmingelectronics
@programmingelectronics Год назад
Would be pretty neat!
@steventeasdale9082
@steventeasdale9082 Год назад
Hi, have you got the code and schematics for this amazing project, i have been using ChatGPT and it's amazing especially the newly released ChatGPT4. I would love to do this, like the KITT car if you add voice recognition, please add the code and schematics for us, I see lots of peolpe asking and you advised you were sorting it?
@programmingelectronics
@programmingelectronics 7 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@jesse7107
@jesse7107 Год назад
Project idea: animatronic head with huskylens eye that recognizes you. Program it so you can talk to the head this get converted to text which gets sent to chatGPT and the reply is said over speaker.
@programmingelectronics
@programmingelectronics Год назад
Neat idea! I had been looking at some animatronic eyes - would be neat!
@Pippo.Langstrumpf
@Pippo.Langstrumpf Год назад
A portable Brain! Me gusta mucho!
@programmingelectronics
@programmingelectronics Год назад
Thanks Pippo! They just released the chatGPT API yesterday, so I am excited to super charge this...
@danielk.9116
@danielk.9116 Год назад
Skynet...I love it...
@gasmonkey1000
@gasmonkey1000 5 месяцев назад
In the off chance ya see this I was curious if we could do the same with GPT 4chan?
@programmingelectronics
@programmingelectronics 5 месяцев назад
Yes, it'd be a one line change to the code.
@gasmonkey1000
@gasmonkey1000 5 месяцев назад
@@programmingelectronics Thanks man!
@truetech4158
@truetech4158 Год назад
You could've been hugh dillon's brother in the movie Hardcore Logo, the one that's into electronics, if he had a brother.
@programmingelectronics
@programmingelectronics Год назад
Thank you.
@DesertVox
@DesertVox Год назад
I was expecting something like this, to make Arduino take advantage of the AI revolution. It's happening. Next: make arduino use a camera and AI magic to make stunning projects on the cheap.
@programmingelectronics
@programmingelectronics Год назад
Neat idea! Yes, I have some more ideas about how to leverage the textual AI with Arduino, still a work in progress though.
@HeshamEllaban1
@HeshamEllaban1 Год назад
Great idea! thanks for the video
@programmingelectronics
@programmingelectronics 7 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@HeshamEllaban1
@HeshamEllaban1 7 месяцев назад
@@programmingelectronics thank you ❤❤
@sarvajithpradeep4866
@sarvajithpradeep4866 10 месяцев назад
It would be very useful , if you put a brief explanation and how to make it.
@programmingelectronics
@programmingelectronics 10 месяцев назад
Did a walk through here: I hope you find it helpful! www.programmingelectronics.com/chatGPT-terminal
@sarvajithpradeep4866
@sarvajithpradeep4866 10 месяцев назад
@@programmingelectronics thank you so much.😃
@PropellerSteve
@PropellerSteve Год назад
This is good stuff, thanks for sharing.
@programmingelectronics
@programmingelectronics Год назад
Thanks Steve!
@user-bq2un2mr2d
@user-bq2un2mr2d 3 месяца назад
I want to use it in esp-wroom-32. Please help..
@alimobaraki511
@alimobaraki511 Год назад
Awesome 👌
@programmingelectronics
@programmingelectronics Год назад
Thank you Ali!
@ShawankumarParida
@ShawankumarParida Год назад
Make a video on TTGO T-Display! I have some ideas. Are you online?
@abhisvibetech6121
@abhisvibetech6121 Год назад
Can you post the complete tutorial of this project It might be very helpful to beginners. I'm also a beginner After seeing your video I think I want to make this project. Can you plz help me
@abhisvibetech6121
@abhisvibetech6121 Год назад
Plz help me
@GrizlyMad
@GrizlyMad Год назад
Is it possible to add voice to text and text to voice for this project?
@programmingelectronics
@programmingelectronics Год назад
I’m looking into it…. That be very neat
@ExcaliburCanon-eh3lu
@ExcaliburCanon-eh3lu 4 месяца назад
Go for it, do it. All subscribe to your channel for eternity
@TheOneTrueStoney
@TheOneTrueStoney Год назад
Looks like fun...add voice recognition and you've built an Alexa!
@programmingelectronics
@programmingelectronics Год назад
I totally want to! I just want to make sure it hears clearly, as sometimes Alexa seems to not quite do the language parsing well. I am thinking about a couple different angles to approach this...
@shivangprasad
@shivangprasad 11 месяцев назад
will you ever make a tutorial of this😅
@techcodesmartly2547
@techcodesmartly2547 Год назад
you are very smart guys!!!
@programmingelectronics
@programmingelectronics Год назад
Thanks! It’s much easier because so many people have written open source libraries for Arduino
@Dus10Sievs
@Dus10Sievs Год назад
Can you share a link to your sketch?
@dhingluvlog
@dhingluvlog Год назад
Make it voice acceptable and speak the output using speaker
@user-ge4fr5iy3t
@user-ge4fr5iy3t Год назад
虽然听不懂英文,但是我大概知道大佬作品是什么,应该是键盘+WIFI模块+显示器,通过键盘录入问题,向chatGPT请求,然后将提问到的结果展示在显示器上。当然可能还有更酷的东西,但是我英文不好😢
@dafto5820
@dafto5820 Год назад
Could you make the esp32 talk?
@programmingelectronics
@programmingelectronics Год назад
Yes, for sure! in fact, I bought a voice synth module that'll probably hook up for the next iteration...
@jameskidd7906
@jameskidd7906 Год назад
Ammazing thank à lot for the vid
@programmingelectronics
@programmingelectronics Год назад
Glad you enjoyed it James!
@firedot69
@firedot69 Год назад
sir where is code , i want to make it for my college project please reply fast...
@thegurl1407
@thegurl1407 Год назад
Is it possible to operate the program offline without wifi?
@programmingelectronics
@programmingelectronics Год назад
Good question! No this one depends on using the openAI API, so it needs wifi
@twenyyThree
@twenyyThree Год назад
i really like the idea !!! can you share the details and the code with us pleaase ⁉
@programmingelectronics
@programmingelectronics Год назад
Coming soon! Sorry for the delay.
@froggy-Frenzy
@froggy-Frenzy Год назад
Nah, this is the next level
@programmingelectronics
@programmingelectronics Год назад
Thanks!
@DannyHarper-ml5qw
@DannyHarper-ml5qw 9 месяцев назад
Hey can I pick your brain about a similar topic?
@motionsick
@motionsick Год назад
Yup. I can't write code but I can make working code beyond my wildest dreams thanks to chatgpt.
@PakiNewsNetwork
@PakiNewsNetwork Год назад
Never knew ESP32 was capable of all this. Where is the full video with full tutorial and code? This is a life changing video.
@programmingelectronics
@programmingelectronics Год назад
Thanks! Still in the works for the rest...
@programmingelectronics
@programmingelectronics 7 месяцев назад
Check out the code, wiring diagram, and materials needed for this project here: bit.ly/chatGPT-terminal
@raghedjaafar39
@raghedjaafar39 Год назад
add speech to text, then text to speech, you've got a talking robot!
@AEX5926
@AEX5926 Год назад
Can you use a regular keyboard
@programmingelectronics
@programmingelectronics Год назад
Great question AEX! You might be able to, but you'd have to add a layer that could read the USB keyboard commands and send them to your Arduino, and then map them. To me it looked easiest to use a PS2 keyboard with a supporting library for it.
@Cricmania10
@Cricmania10 Год назад
how to make this thing , can you provide circuite diagram and code
@programmingelectronics
@programmingelectronics Год назад
Coming soon!
Далее
The coolest robot I've ever built!
19:40
Просмотров 4,3 млн
26 Incredible Use Cases for the New GPT-4o
21:58
Просмотров 204 тыс.
Lablaringdan chaqib olaman🐝
00:30
Просмотров 330 тыс.
What If You Put Nutella In a 3d Printer?
7:35
Просмотров 30 тыс.
Arduino To ESP32: How to Get Started!
9:26
Просмотров 165 тыс.
12 NEW Arduino Projects!!! (2024 Edition)
9:20
Просмотров 107 тыс.
3 HACKING gadgets you have to TRY!!
19:34
Просмотров 1,4 млн
chatGPT in your Arduino project?!
10:26
Просмотров 11 тыс.