Glitter Tumbler Tutorial for Beginners | Step by Step No Epoxy CrystaLac Method 2020

Подписаться 66 тыс.

Просмотров 172 тыс.

50% 1

Updated Video for 2022: • 2022 Beginner Glitter ...
Watch this step by step tutorial to learn how to glitter a tumbler for beginners! In this tutorial, I'm using CrystaLac products to glitter my tumbler because it is non-toxic and there are no dangerous fumes so it's safe to use in my home! This tumbler tutorial will take you through each step of the process so you can feel confident to make your own glitter tumbler! #crystalac #glittertumbler #tumblertutorial
EXCLUSIVE EMAILS: sign up to be a part of my exclusive email community where I send weekly tips: craftingthegoodlife.com/tiptu...
I participate in various affiliate programs. Some links that I share may provide me a small commission if you make a purchase. This is at zero cost to you. I only recommend products I use personally!
CRYSTALAC PRODUCTS
The CrystaLac Company
thecrystalacstore.com/collect...
TUMBLERS
Craft Haven
www.crafthaven.com
Code: alisoncrafts
AMAZON SUPPLIES
www.amazon.com/shop/alisoncrafts
GLITTER
Glitzy Kreations
glitzykreations.com/?ref=alis...
Code: alison10
FONTS & GRAPHICS
www.creativefabrica.com/ref/4...
CAMERA & VIDEO EQUIPMENT:
Camera 1: amzn.to/2SUHvCD
Camera 2: amzn.to/3wPI9Aa
SD Card: amzn.to/3xzfeQO
Microphone: amzn.to/3gUbgLN
This channel is sponsored by Craft Haven
LET’S GET SOCIAL WITH CRAFT HAVEN
Facebook group: / craft. .
Facebook page: / crafthaventu. .
Instagram: / crafthavent. .
Shop: www.crafthaven.com
LET’S GET SOCIAL WITH ALISON CRAFTS
Instagram: Alison.crafts_
RU-vid: / alisoncrafts
TikTok: vm.tiktok.com/ZMJrVkFwL/
--------------------
0:00 Intro
1:10 Prep
1:29 Base Coat
3:28 Apply Glitter
4:41 Seal & Flatten
5:38 Build up Layers
6:54 Sand
7:37 Continue Layers & sanding
8:29 Cure Time

Хобби

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 284

@AlisonCrafts 2 года назад

Hi Everyone - There is an updated version of this video with all the latest info for 2022! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YmXJ00X9Qc0.html

@Victoria-Monet 2 года назад

Thank you!

@opie1476 2 года назад

I didnt sand mine or anything just cleaned it with alcohol and nothing happened. I painted it, glittered it and epoxied it. It turned out amazing

@lindseyjacobs8305 2 года назад

This is so incredibly helpful. Thank you!

@monicaartaviaabarca5965 2 года назад

Hola saludos desde Costa Rica, voy a hacer mi primer vaso térmico y este tutorial me va a servir mucho, gracias por compartir tus conocimientos! 🙋🏼‍♀️✨🇨🇷✨🌷

@PrinceCharmingsMom2930 3 года назад

Awesome! Thank you!

@margaretreyna5518 3 года назад

Love your work!

@AlisonCrafts 3 года назад

Thank you!

@tinahaynes175 3 года назад

I just ordered my first quart of bright tone!! I'm SOOOO excited!! I did 2 cups with epoxy. Stripped one. What a nightmare. Re-glittered it but haven't epoxied it yet because I don't have a turner and the thought of hand turning if for 4 hours AGAIN makes me ill. I'll turn my Crystalac cups for an hour!! No problem!! *insert cheesy grin and childish giggles* I didn't even make it 1/2 way thru the 16oz box of epoxy before I decided I was D.O.N.E. done with it! Maybe I'll make a paperweight with the rest lol.

@AlisonCrafts 3 года назад

LOL! I'm so glad you're on team Brite Tone! I agree that it is soo much better!!

@ingridhernandez5625 3 года назад

Your video help me a lot I will try thank you

@ginaozmtz 3 года назад

Thank you for your tutorials! Have you tried Triple Thick to seal instead of Brite Tone? If so, which do you prefer?

@Urmyseoulmate 3 года назад

Thank you so much this was soo helpful

@AlisonCrafts 3 года назад

Glad it was helpful!

@mischastewart 3 года назад

I definitely want to try this out

@AlisonCrafts 3 года назад

Do iT!

@irmarisrobles507 3 года назад

Ive watched this video like 5 times... Im reciving my crystalac on friday and im so excited to get started 😅

@AlisonCrafts 3 года назад

You're going to be great! Let me know if you need any help!

@413stylist9 3 года назад

I feel this! I think I'm on #3. Just received my box of goodies and I'm scared of it! LMAO

@CamFam14 3 года назад

Thanks for posting! I was going to get into epoxy..but then I ran into a video saying how bad it is for you. I felt very discouraged because I didn’t want to poison my family. So I googled alternative to epoxy and I ran into your blog! Thank you for making these videos. I don’t feel afraid anymore. I can’t wait to try out the product!!

@Lindz1745 2 года назад

Your comment saved me from diving directly into epoxy and buying crystalac instead. I didn’t realize it was so harsh on the lungs. I just got this product today so I’m looking forward to using it too! I know this is 10mo late but thank you and to this channel for having an alternative!

@melissaboatright4395 2 года назад

So she uses the bright tone instead of the epoxy . Just wanna make sure

@AlisonCrafts 3 года назад

Grab your CrystaLac Here: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN Unsure what you need to buy? Watch this Video:ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t4xlALmd7pU.html

@margie1893 3 года назад

I'm sorry I'm like a need to see person, hope you don't mind but can I get the names of the products I need.

@AlisonCrafts 3 года назад

Every product i used for this cup is linked in the description :)

@ginaadelman567 3 года назад

If I don’t have the e600, what else can I use to seal the glitter?

@naptimecreations 3 года назад

Awesome, I hope to make my first Epoxy free tumbler soon 💜💜💜

@mies.1742 3 года назад

Finally, a thorough, easy to follow tutorial! Thank you!! I have been making tumblers using epoxy.. I'm on oxygen and have lung & other health issues. Even though my craft room is not in a place where people or pets live & I use proper PPE and ventilation.. I still worry non-stop about how toxic and hazardous epoxy is to me, my kids and pets health. I have been wanting to try Crystalac for some time now, but I haven't because: 1. I wasn't quite sure how to, but thanks to you, I do now. 2. It seems like a lot of extra work and very time consuming. . My question is, how long does it take you to make a cup, start to finish? Also, how many tumblers (let's say 30oz skinny) can you make with 1QT of brite tone and other supplies needed. I really want to feel confident that I will know what I'm doing and have an idea of how much it costs to use CrystaLac products. Sorry for asking so many questions and if what I said doesn't make sense. Definitely subscribing!

@ashleydrennin4190 2 года назад

omg I TOO have lung issues and health issues and on oxygen and am trying to do crystalac in stead of epoxy I am so glad I am not alone.

@mercedesmazza4057 2 года назад

This video is extremely helpful. I’m making the switch from epoxy. Question though, if I need a second coat of glitter do I still need to seal the glitter with e6000 then go over with BT and glitter again, then seal again?

@stephanieday4459 3 года назад

omg nevermind. i just bought $105 of stuff on there. excited! but omg i hope i can do this! your videos inspire me to get going!

@AlisonCrafts 3 года назад

LOL! You got this!! Welcome to the club :)

@stephanieday4459 3 года назад

@@AlisonCrafts do you have any videos on how to add a permanent vinyl decal using crystalac?

@3bratzmomaa 3 года назад

Hello it’s me again. Thank you so much for your help. I just have a couple questions. As I mentioned I am just beginning and I started gathering materials. I watched several videos and I’m just wanting to make sure that the materials I got but would work with a Crystalac. For example I got the Loctite adhesive for my glitter, No rust oleum spray paint for my base coat color, And polycrylic to seal my glitter. Will these items work?

@Buzzyinmich 2 года назад

Allison, Thank you so much for making all of these videos. It has helped me quite a bit. I was wondering if I might be able to email you for a few questions I have.

@AlisonCrafts 2 года назад

Yes! My email is Alison@alisonsullivan.co

@tvbutterfly8500 Год назад

Beautiful! I'm just attempting my QST tumbler and need to do a 2nd layer of glitter. What is the best way to do that? I'm using Bright Tone and have E6000 spray. Thanks in advance!

@ericastwilight 3 года назад

Great tutorial, have you tried the mini heater to dry that I've been seeing on TT? It's for epoxy cups but wondered if Crystalac would react similar? Off to watch more videos!

@AlisonCrafts 3 года назад

As far as I have been told from the CrystaLac owners, heat is a no no! The only source of heat would be a 60W light bulb about 12 inches away from the cup! If you see another video on TT, can you tag me?? i'd love to check it out. I'm @alison.crafts_

@jorgequinones2249 2 года назад

Hi Alison this is the first I'm doing the crystalac method for glitter tumblers. You mentioned you can apply a coat of write tone by finger or brush, just wondering what type of brush can be used and if its a regular type paint brush will the crystalc clean off the brush with water?

@corkyrae09 2 года назад

Hi!! I don’t know if I missed it, do you wait 5 days to add your decal? Do you put another layer on after decal is added?

@liveartcreations8498 3 года назад

Hi great videos super helpful! Question if you want to add a quarter or half inch border to the top of tumbler, do you use electrical tape and how soon after you coat it with brite tone do you remove your tape?

@AlisonCrafts 3 года назад

If you want to tape the edge i would remove and replace every 3 coats.

@artsymomof2 3 года назад

Question can I mix a drop of FNA paints into UW to add color to it?

@vickin6833 2 года назад

Can acrylic paint be added to the universal white for the base coat? Thanks!

@dekoshastutorials8371 3 года назад

I’m sick of epoxy I think I’ll be using crystalac thank God I ran across you

@AlisonCrafts 3 года назад

Yay so glad you're here!

@donnielleguillory4851 3 года назад

Does crystalac yellow eventually? I know some epoxys have the tendency to yellow eventually?

@kaseymacd9458 2 года назад

Can we use mod podge acrylic spray as a sealant? Or if we use glitter glue, do we not need to seal?

@camilaprocopio-bridges9513 3 года назад

Hello! Love your videos! Question, can I just add glitter to the stainless steel tumbler without painting it first? Will it make a huge difference? And can I use loctite spray to put my glitter on? And then use the BT for every layer after that. Sorry but exactly is the E6000 used for?

@AlisonCrafts 3 года назад

Basecoating is best to prevent rust spots. You can use loctite but it needs to dry 48 hours before BT! E6000 is used to seal and flatten the glitter so the glitter doesn't move and it cuts down on BT layers

@poizonfetish88 3 года назад

About how many 20 oz skinnies could I do with a pint of BT? Also, can I use the Pure White Flip'n Awesome? They don't really have many colors to choose from.

@essencemagers2317 2 года назад

Thank you for making this video. How long do you Sand the cup?

@AlisonCrafts 2 года назад

not long at all, very little for the first few!

@nataliechandler874 2 года назад

Can tumblers be shipped after 5 days? Will packing materials stick to them or should you wait longer to ship?

@selynamarie7031 2 года назад

Hi Alison! I just recently found you on youtube while doing some research on the big switch! I am currently waiting for my crystalac products to come in the mail but i was just curious as to how many coats you normally put on after adding a decal?

@AlisonCrafts 2 года назад

6-8 depending on the type of vinyl and how thick it is!

@stephanieday4459 3 года назад

where do you get the gloss paints you refer to?

@mariahradcliffe7010 3 года назад

Do we do same steps for a plastic reusable cup??

@gg01lady 2 года назад

Love this tutorial. Question if I’m not using glitter just spray paint the tumbler white once it dry for 4hrs layer with brite tone? But if I’m adding a waterslide would seal that again ? So using brite or do it after I add the waterslide or decal?

@AlisonCrafts 2 года назад

Spray paint, wait 48 hours, 3 coats of brite tone (wait 4 hours before recoating), add waterslide, continue coats of brite tone

@ginadephillips9717 3 года назад

Thank you for this video! I just purchased my first tub of Brite Tone and am truly excited to get started with it! If you have time, could you please let me know the difference between the Brite Tone and the Extreme Protection? I want to be sure my cups are long lasting. :-)

@AlisonCrafts 3 года назад

They're both clear top coats that are strong and non-yellowing. The brite tone has higher solids , so it's harder and shiner when cured! I dont usually use EP at all for my glitter cups anymore but you can use it for the first several layers if you want because it's cheaper! but since it doesn't have as many solids as the BT, it will take more coats to get a smooth finish. that's why i just stick with brite tone - so i can get my cups finished faster!

@ginadephillips9717 3 года назад

@@AlisonCrafts You are a gem! Thank you so much for the information. I'm so excited to make the switch

@ginadephillips9717 3 года назад

@@AlisonCrafts Sorry one more question. I don't glitter my cups I mostly paint. Do you have advice on how many layers it might take for just a flat surface? Thank you for your help!

@AlisonCrafts 3 года назад

@@ginadephillips9717 we recommend minimum 6 coats for protection!

@luckyoscar4110 3 года назад

Can you use crytalac on plastic stbx cups?

@abbypollard6007 3 года назад

So do you apply decals to the sanded and rinsed layer or do you add an additional coat first?

@AlisonCrafts 3 года назад

Either Way. You can apply it to a sanded surface but it's not required.

@martinezmary63 2 года назад

I always have my ceiling fan on in my craftroom...do I need to turn it off when using Crystalac on my tumblers

@vezzy116 3 года назад

Can you do a tutorial for a tumbler without glitter and adding a decal/vinyl? Can we use the flip’n awesome paint only then seal with Brite tone?

@AlisonCrafts 3 года назад

Yes and yes!

@leana82lopez 2 года назад

I have a question I have a friend that wanted white tumbler I did a waterslide I sealed it waited put a coat of brite tone I’ve done 3 coats it has streaks of brite tone tumbler doesn’t have glitter so when this dries I can sand and put 3 more coats

@idajimenez1867 Год назад

Hi Alison, can you please tell me if you are able to put rhinestone crystals on the cup and underneath that last coat? Or would you recommend putting the stones on top of the last coat?

@AlisonCrafts Год назад

You can put the rhinestones on the last coat!

@reginafurr6175 Год назад

What are the equipment that you need to do the tumblers

@alexandrahindinger5989 2 года назад

If we have to repeat the glitter process again is there any other steps we should pay close attention to?

@Urmyseoulmate 3 года назад

Is the crstalic brite tone the same as the topcoat? Does crystalac sell the sanding block and sand pad?

@AlisonCrafts 3 года назад

Yes they sell the sanding stuff! Here is the link to brite tone: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN

@jessicasantana7857 3 года назад

I saw ur other video when u used the glitter glue to apply glitter. Would I still need to use the E6000 method if I’m using glitter glue?

@AlisonCrafts 3 года назад

Nope, you don't need E6000 anymore!

@helinahennigan3059 2 года назад

I bought the crystalac glitter glue what step would I use that for?

@nicholenewton7896 3 года назад

Hello. I want to put vinyl (either permanent or printable) on my mug. Do i put it at the very end and do i seal it?

@AlisonCrafts 3 года назад

You an add your vinyl once the surface is smooth. I usually seal it with about 6 coats on top but since it's permanent it's up to you if you want to seal it!

@stanleyyelnats8604 3 года назад

I have tumblers that have like a powder coating on them. Can i sand those to smooth and then do the same steps as if it was stainless?

@AlisonCrafts 3 года назад

Those need to be stripped first

@2002smartgirl 3 года назад

Could you do a two tone glitter cup with a decal? I want to do a baby Yoda cup using white and dark green glitter.

@AlisonCrafts 3 года назад

I sure can! I do have this ombre tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ezJwUfvISis.html

@jordanpersonius5554 2 года назад

How do I go about it if I don't do a glitter base? I made some tumblers from mother's day gifts this last year while I was new to my cricut. But now I want to seal them for my mom and mother-in-law. Can I just use the layers of crystalac? Or do I have to somehow prep my tumbler with the vinyl already applied? Thank you for all the information! I'm excited to start doing tumblers with my cricut!

@AlisonCrafts 2 года назад

You do have to prep. Are they stainless steel? If so you can use the zinsser shelac spray!

@sookiepanda 3 года назад

So after I put on a decal what can i seal it with to protect it? Thank you

@AlisonCrafts 3 года назад

Brite Tone :)

@yrodriguez5892 3 года назад

Hi..where do you get the spinner?

@latazdevil 3 года назад

Hi i recently bought the brite tone from the site u provided i wanted to know why is it so watery? Is that normal? Cus usually the regular epoxy i have used before is a thinker liquid

@AlisonCrafts 3 года назад

yeah it's not at all like epoxy. it has a thin viscosity and goes on in thin coats! HIghly recommend watching my tutorials to see how i use it!

@poelaurie 3 года назад

Im currently switching from epoxy to crystalac. I have three cups I've already glittered and sealed with rustoleum 2x ultra cover semi gloss clear. I was waiting to get my crystalac so i can use that. My question is if I can use the crystalac even though i already sealed with rustoleum? Thanks!

@AlisonCrafts 3 года назад

Totally! As long as the spray paint has had 48 hours to dry its all good!

@christinemele4908 3 года назад

After you e6000 and roll in parchment paper 3xs how long do you let it spin before applying bt?

@AlisonCrafts 3 года назад

I spray or brush on my E6000 and let it spin for an hour. Then i roll in parchment paper. Then i just let it hang out on my drying rack for another hour or two before BT!

@saramellring3949 3 года назад

Can you do a live for making a tumbler for beginners

@mandypandy9926 3 года назад

WhT GLITTER IS THAT? Love it!!

@AlisonCrafts 3 года назад

It's called nebula from www.creepsakesshop.com!!

@starr8111 2 года назад

Do all these steps apply for glass bottles

@rebekahwatts8327 2 года назад

Hi! I’m super new to this. How do you get the rim of your cup smooth with crystalac products?

@AlisonCrafts 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KE7QtAZaioQ.html

@rebekahwatts8327 2 года назад

Thank you so much!! I somehow missed that one.

@ashleyramirez6280 2 года назад

Hello Alisson. I finally got my materials to use brite tone! I have one question before I start. Do you need a torch to pop bubbles when it comes to brite tone?

@AlisonCrafts 2 года назад

No. no heat! you shouldn't have an issue with bubbles. if you do, you're likely putting your coats on too thick!

@ashleyramirez6280 2 года назад

@@AlisonCrafts thank you!

@uniquedoggieboutique 3 года назад

Quick question, after smooth and add the decal, how many more layers of brite tone?

@AlisonCrafts 3 года назад

just however many it takes to cover the vinyl! I usually do 3 coats, give it a sand right over the vinyl only, and then do 3-4 more!

@2002smartgirl 3 года назад

Can you use 2 different colors on base coat using flippin awesome paints?

@AlisonCrafts 3 года назад

sure!!

@claudiacorona3921 3 года назад

Hello..I used spraypaint let dry. N then used acetone to do a dirty look...how long do I wait to u use.the brite tone

@AlisonCrafts 3 года назад

Spray paint needs 48 hours to dry!

@shaquanahenry9150 3 года назад

Hi, I am using clear acrylic tumblers and when i sand them it leave scratches on the cup, what do you recommend I do? I also used HTV instead of regular vinyl do you think it needs to be sealed?

@AlisonCrafts 3 года назад

use 400 grit sand paper lightly and the scuffs will be covered up and gone after you do a few coats of brite tone! You do not need to seal htv before brite tone

@leahbailey1778 3 года назад

Is crystalac really watery? I have some but expected it to have some thickness to it. Also how do you strip crystalac?

@AlisonCrafts 3 года назад

It's definitely thin! That's why you have to do so many thin coats for it to build up! You can strip with citristrip or even just isopropyl alcohol!

@veronicajuarez3684 2 года назад

Hi! You can use whatever acrylic paint?

@AlisonCrafts 2 года назад

Not as a base coat no.

@chrystaladams8373 3 года назад

So excited to find a resin alternative. I hate the stickiness and messiness of resin. Thank you! Can acrylic paint be used as a base coat? If so, is there still a 48 hour wait time. If you answered this already, I apologize. Thanks!

@AlisonCrafts 3 года назад

Acrylic paint is not suitable as a base. It doesn't have adhesion properties or rust inhibitors! You'll want to have a primer first for sure - either the universal white or spray paint. you can paint acrylic over that. it does need at least 24 hours to dry because it just dries super slowly!

@chrystaladams8373 3 года назад

@@AlisonCrafts thank you!

@chrystaladams8373 3 года назад

@@AlisonCrafts I made my first tumbler with Crystalac and I LOVE it. One more question, can I switch to Crystalac if I have already started it with resin? Thank you!

@irishdisaster23 2 года назад

Do you have these steps written anywhere? I like to tax it in my craft space for easy reference.

@kfuzzyr 2 года назад

Glow mica...do I add it to BT or to my glitter?

@AlisonCrafts 2 года назад

You can mix it in with Brite Tone!

@ingridhernandez5625 3 года назад

I am confused sorry when you add glitter before you add Brite tone no glue?

@jessicasantana7857 3 года назад

Hi! Can I just use regular acrylic paint to tint the industrial white?

@AlisonCrafts 3 года назад

it will be pastel. you an only add about 3% of the volume as acrylic paint and UW is very very very white. so you wont get too much of a color!

@jessicasantana7857 3 года назад

@@AlisonCrafts what would you recommend for tinting the UW?

@bethholloway3761 3 года назад

Question. If you purchase a glitter tumbler and you want to do waterslide, vinyl, etc., do you still have to sand the cup prior to adding the design then adding the brite tone? I'm thinking it would mess up the gloss and glitter thats already on the tumbler?

@AlisonCrafts 3 года назад

Yeah the cup needs to be prepped. Either sanded or completely stripped

@AlisonCrafts 3 года назад

But vinyl is permanent so you wouldn't need any sealer on top!

@caseymartin4846 2 года назад

Could we use regular acrylic paints for base coats?

@AlisonCrafts 2 года назад

No you need a primer down first. Something designed to stop rust and adhere to metal!

@crystallien8988 3 года назад

Late to the party but atleast I made it right? Tried my first tumbler... glittered it (witch I'm struggling with and idk why??) I can't get the the brite tone to even out. It looks bumpy even after sanding. Should I sand more? Is it the glitter? Is it both? It's my first one but I don't want to begin "ruining" cups.

@AlisonCrafts 3 года назад

how many coats? you need to sand every 3-4 coats!

@loriarmes7153 2 года назад

What kind of note do you put with your tumblers for customer care?

@AlisonCrafts 2 года назад

I have a care card with care instructions and a thank you card!

@jacquelinepantoja1147 3 года назад

Can you place your vinyl decal before adding final coats of brite tone? So as to encase the decal in if that makes sense

@AlisonCrafts 3 года назад

Yes, once the surface is smooth, add your vinyl. Then do a few coats of BT on top!

@jacquelinepantoja1147 3 года назад

@@AlisonCrafts thanks so much! Also, can I use loctite spray adhesive and sealer vs e6000?

@AlisonCrafts 3 года назад

@@jacquelinepantoja1147 yes! Just make sure you let it dry 48 hours

@TheLovelyRANDOMNESS 2 года назад

Maybe I’m over looking but do you add vinyl between britetone or just on top

@AlisonCrafts 2 года назад

you can add vinyl once it is smooth. I generally add brite tone over the vinyl too

@TheLovelyRANDOMNESS 2 года назад

@@AlisonCrafts i took a shot I the dark add my vinyl after the 3rd sanding

@whitneymathenia5458 3 года назад

Could I use this on trays also?

@AlisonCrafts 3 года назад

yes!

@reelgood706 3 года назад

I have seen some use polycrylic as a base coat? Have you and any thoughts on this?

@AlisonCrafts 3 года назад

definitely do NOT recommend. It's super low solids so it isn't durable and it yellows over time. Use the Crystalac Extreme Protection instead!!

@reelgood706 3 года назад

@@AlisonCrafts Thanks so much & thanks for the great videos!

@tiffanyjones3451 3 года назад

Thanks a lot for this video. I have started making tumblers using crystalac products. I do have a question about the foil flakes, what product to use to apply on tumbler and drying time? Also, do you continue using Brite tone to seal?

@AlisonCrafts 3 года назад

I use Glitter Glue which takes 2 hours to dry! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qIu5HgcgLRA.html

@wendyhayes240 3 года назад

Do you have to add glitter after the base coat

@AlisonCrafts 3 года назад

Steps are 1) prep 2) base coat 3) add glitter

@babydzcreationz510 2 года назад

hi,, question, what if some don't have a tumbler turner? do we need it to have some spinner to add the BT?

@AlisonCrafts 2 года назад

No you don't need a turner!

@babydzcreationz510 2 года назад

@@AlisonCrafts good to hear, i haven't built mines yet. Lol thanks

@brittenym2943 2 года назад

Is the product you use for the glitter, the same as your top coat?

@AlisonCrafts 2 года назад

yep :)

@LOVESTOWRITEKID24 3 года назад

Would any dish soap work like from the dollar tree persay

@AlisonCrafts 3 года назад

I think so!

@amandalauritson1320 3 года назад

What is the method for this if I need to put on a second layer of glitter?

@AlisonCrafts 3 года назад

I apply right onto my E6000. So after my first glitter layer dries, i spray on E6000 and then add more to that. Let that dry and continue with the flattening process.

@samanthafaison4997 3 года назад

Can you use tack it with crystalac?

@AlisonCrafts 3 года назад

the tack it over and over glue is not recommended because it's not permanent but you an achieve the tack it look, yes! Here is are two videos i did: Glitter Glue - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kyA5c4y8_cw.html or Brite Tone - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xzq4BTKqVhQ.html

@jjleigh829 3 года назад

What grit sand paper do u use for this? Do u use the same grit for the entire process??

@laurienunes5101 3 года назад

220 grit

@AlisonCrafts 3 года назад

To prep you use 220 grit and for the sanding in between coats of brite tone, use 400!

@tennellebailey3977 3 года назад

Can you use acrylic paint with brite tone

@AlisonCrafts 3 года назад

you can mix it in as long as it's less than 3% of the volume

@larissaperez6442 3 года назад

Can I use krylon clear coat instead of e6000 ?

@AlisonCrafts 3 года назад

yes you just need to let it dry 48 hours

@driajones568 3 года назад

Will any brand of 220 and 400 grit sandpaper do🙂?

@AlisonCrafts 3 года назад

yep!

@TheKrista5 3 года назад

How long is it before you can drink out if the cup and use it? I'm doing baby bottles for my etsy with mod podge and polyurethane. I'm new to this

@AlisonCrafts 3 года назад

5 days but maybe longer for a baby cup since it will probably get dropped! I recommend using this over the poly - it's way after and better especially for babies!

@TheKrista5 3 года назад

@@AlisonCrafts thank you ❤

@uniquedoggieboutique 3 года назад

Ive sprayed painted my cup and 2 layers of modge podge and sanded. Can I still use bright tone? I was getting ready to epoxy and found these videos.

@AlisonCrafts 3 года назад

yep! As long as it has been 48 hours since your spray paint and mod podge you are good to go!

@claudiacorona3921 3 года назад

Do we have to add mod podge or can I add cl after spray paint dried