Тёмный
No video :(

Gluwphy 20w 8-in-1 Laser 

GeekBuilders
Подписаться 20 тыс.
Просмотров 762
50% 1

Gluwphy is a startup laser company that wants to bring enclosed Diode lasers to DIY enthusiasts everywhere. This 20w class 1 laser marks their first entry to the laser market and has quite a bit to offer.
The laser is able to engrave and cut a wide variety of materials along with the capability to use a rotary engraver without needing a separate riser base.
*************************************************************
Get the Laser here: amzn.to/3xOyAH2
Checkout www.Gluwphy.com for more information
************************************************************
**Ask questions, I would be happy to talk about and answer any questions you have about this laser
---------------------------------------------------------------------------------------------
***Please consider subscribing and supporting the channel on / geekbuilders
Custom designed shirts available from TeeSpring:
geekbuilders-s......
More info - Go to:www.geekbuilder...
----------------------------------------------------------------------------------------------
-Follow and Subscribe
/ geekbuilders
/ geekbuilders
/ geekbuilders
***Check out the Making Geeks Podcast
**www.makinggeeks...
-------------------------------------------------------------------------------------------
Music was purchased from:
EpidemicSound.com

Опубликовано:

 

8 апр 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 11   
@GeekBuildersNet
@GeekBuildersNet 4 месяца назад
Quick Note: The Flame Sensor Issue Was resolved with a quick adjustment on the physical machine
@TheLouisianaHobbyGuy
@TheLouisianaHobbyGuy 3 месяца назад
If you take the cover off the flame sensor, there's a variable resistor inside you can turn to adjust it. And you can engrave clear acrylic. Just leave the paper on it and mirror the image.
@GeekBuildersNet
@GeekBuildersNet 3 месяца назад
I figured out the flame sensor after I released the video, I just never posted an update. As far as the clear acrylic, I have not tried it with diodes, but I have been able to engrave clear glass. I will try the acrylic with your recommendation. Thanks for watching.
@allenxu5146
@allenxu5146 4 месяца назад
The fan is a vortex fan, which is commonly used in air purifiers, it has a rectangular air outlet, so the holes according to the shape of the air outlet.
@GeekBuildersNet
@GeekBuildersNet 4 месяца назад
Noted. Thanks for Watching
@gilaraujo
@gilaraujo 4 месяца назад
Those fire sensors are just UV light sensors. so if you open the lid, puff! If you get a little flame up on cutting (Which happens) puff! No camera i assume? not even as addon?
@GeekBuildersNet
@GeekBuildersNet 4 месяца назад
They are planning on adding a camera for their 2.0 version. The laser does have a projected "x" on the piece that helps with placement though.
@benjaminpastrana9662
@benjaminpastrana9662 Месяц назад
No camera?
@GeekBuildersNet
@GeekBuildersNet Месяц назад
@@benjaminpastrana9662 Correct. No camera
@purejade4298
@purejade4298 4 месяца назад
very interesting
@GeekBuildersNet
@GeekBuildersNet 4 месяца назад
Thanks for watching
Далее
Could This Be Your First Laser :: AtomStack A24
20:57
The xTool S1 Laser is Their Biggest Flex So Far
22:28
Running With Bigger And Bigger Feastables
00:17
Просмотров 85 млн
Where to Buy Wood for your Diode Laser
15:38
Просмотров 2,1 тыс.
20 CAR INVENTIONS THAT GO TO THE NEXT LEVEL
20:36
Просмотров 38 тыс.
7-Step Method for Photo Engraving with LightBurn
17:30