GM Camaro 16-20 Splitter Install Guide 

This is going to be one of my first aftermarket purchases! I love how it looks!

I just cracked mine curbed it AGHH Ordered a replacement night fall metallic Thanks for all the help and info

Good morning Lethal, Something very cool happened today. Due to the original selling dealer (Starling Chevrolet in Orlando)being extremely rude at the time of sale of my 2SS, GM gave me a $500 credit towards accessories. So I'm getting my front fascia extension for 88 bucks. Coming this week. I'm stoked! :)) Thanks for the install guide. It's one of the first videos from you I watched. By the way can't wait to see the sound and dyno vid's for your new SW CAT Back System.

Thanks very much for the video. Great reference for me. Installed mine this afternoon by myself. Worked out perfectly! I appreciate the videos you put out! Thanks!

Thanks for the video! I was about to take my SS to the dealer and have them install it. Watched your video... no problem. Easy DIY

Dude, I just noticed. Your the guy on the Titan Fall2 tech test forum hahhaa. thats nuts! Dude i envy what you got goin bro lol BTW. TF2 is EXCELLENT. Very exited to play this weekend.

Mine has the rivet holes but didn't come with rivets. Also are we supposed to use the bolts from the car or the screws that came with it? And are you supposed to put more tape on it?

Finally found a 2016 Camaro channel, subbed.

glad you got you finally got your car sledge. mine should be here in 2 weeks. can't wait!!

i have the same car as you just got it been watching your videos like crazy ,,great job and very helpful info

You can order this part from GM directly or at your dealer, but these sites have better prices: GMPartsOnline - bit.ly/1qBkaCu+ GMPartsDirect - bit.ly/1qBkgKd ShopChevyParts - bit.ly/1qyRQAk SS Part Numbers: Paint to Match - 23301611 Red Hot (G7C) - 23301612 Summit White (GAZ) - 23301613 Silver Ice Metallic (GAN) - 23301614 Nightfall Gray Metallic (G7Q) - 23301615 Mosaic Black Metallic (GB8) - 23301616 Black (GBA) - 23301617 LT Part Numbers: Paint to Match - 23301618 Red Hot (G7C) - 23301619 Summit White (GAZ) - 23301620 Silver Ice Metallic (GAN) - 23301621 Nightfall Gray Metallic (G7Q) - 23301622 Mosaic Black Metallic (GB8) - 23301623 Black (GBA) - 23301624

Just got mine from ACS today. Installing it this weekend.

This car is awesome. Insane fast. Its time to get a Camaro again.

Nice!! Just picked mine up, thinking about adding the front splitter too

Just put this on my 22 1lt. Did you have a gap on each side where you can see the tape between the body and splitter? I posted on camaro6 about this as well.

What is the difference between the Fascia extension and 1LE lip ? Is it the same thing?

What is the point of the front lip,is it just for looks?

Does the GBA black front extension facia matches the stock grill color ?i have a stock 2017 SS convertible I want to match the grill color my car is the metallic silver

Which splitter is this I see so many I’m online tryna order it now but is this the one that’s $200 or $104?

Any tips on buying a cheap used one of these? New adhesive maybe? You said it's fine without drilling the rivets correct

I have a question you have the link to purchase it ??

How's the front splitter holding up? By this I'm asking if it's show signs of impact of debris striking it. I know splitters sit so low and being up front, they can take a beating! I had the one on my previous car protected with clear bra material. Is this something you think it would benefit from? I just got mine on yesterday and it's such a nice piece, I'd hate to see it jacked up. Appreciate the thoughts and trying to make a decision before installation. Thanks!

Are there holes already under the car? Or did you drill it in?

Excuse me, can you Pls tell me the ground clearance of this vehicle?

So Im planning on getting the 6th gen camaro sometime early next year but i can't decide whether to spend the extra money to get the lowering package or just add it later like you did. Now that you've gone through the process would you do it all over again? Did you end up saving some money? Whats your suggestion?

How does the GM front fascia compares to ACS?

I couldn't tell where the tape attached exactly but would you say it would be wise to do this before paint protection film or could you get away with it after you think?

looks good glad to see the mods are starting. curious to if you were to put pressure on the front center portion or off to either side of the splitter, if it gives any indication of gap or separation from bumper? Or do the rivets do a good job of holding in place?

Matt did u make a vid on the zl1 addons facia extension. I was thinking of ordering one

great looking car. so far the only chevy i like.

has any one added the splitter add on under your splitter from zl1addons looking for a video install it comes with no directions. please help

Looks good all storm trooper'd out! Is the front fascia extension offered in body color matching finish?

Nice work, Sledgie!

Man that look sweet as hell!!

Hey lethal I jus got mine but it came unpainted, do you recommend wraping or having it painted.?, would like it to look like yours

Is it same to take my car to an auto car wash, or would the splitter fall off?

Are these cars already being sold now in dealerships? I've stop by at the local dealers, and no one seems to be selling it at my state.

I'm curious if you are glad you did the entire body kit now or wish it was still front and back...t-minus 8 days until I get mine so I'm just picking your brain, loving all your vids

Hi, where did you get it ?

Can you recommend a body kit for the v6 unpainted

did u put mosaic black metallic (GB8) or black (GBA) thanks

Great vid!

Where do you find this parts you get I want the spiter and ported throttle body but don't know where to find it

I know this is an old video, wished I looked this up. Damn I didn't know where to put the stupid tape and put it along where the bolts when in. Crap! Just did it last night. I don't know what to do if anything. Crap! Took me forever to pick a style and then I F it up :( If you read this could you please let me know what you would do if anything. I would appreciate it. 😭

What's the contact info to GM to have them send you guides for specific procedures on specific cars?

where did you get yours from? I'm also in California

What color code is that one, want to order one but I don't want to mess up on the color...

Also could you do a 360 degree view of the car at standing hight then center level?

Nice car, got the link to this after market part?

Man your videos are the best! Where can i order one of these?

Well i`m doing mine in the morning..Hate to drill any holes...

looks more aggressive, I also plan to do it to mine

why dont chevy jus put these on the stock car caus that looks awesome

Now how would you remove it.

can you video the whole car and your driveway so. can see. fully body

any body know where i can buy one of these

what color code is that?

cant find the splitter for my 16

$280 for shipping?? Looks nice but I'm good lol

Looks good man!

Part number

Music name plz?

Got it installed today.i227.photobucket.com/albums/dd12/JRWeber7/20160716_131323_zpsv2vdm3ff.jpg

can you video the whole car and your driveway so. can see. fully body