Тёмный

GMC terrain 2.4 intake removal fuel pump removal and PCV cleaning how/ also possible oil leak reason 

The Clay Way
Подписаться 121 тыс.
Просмотров 96 тыс.
50% 1

Several people have commented on this video and said that this helped them out so you may as well give this vented oil cap a try here is the link to the Amazon for it.
Note : I’ve never personally used it but several people have commented that it worked on their 2.4. Probably wouldn’t hurt on the 3.6, 3.5 3.4 and 2.2 either….
amzn.to/3F3IEeP
If you ever had to remove your intake off your 2.4 eco-tech this video is going to show you how to, Nut and bolt remove it along with showing you how to also remove the high-pressure fuel pump off your cylinder head this information is going to be useful on the 2008 2009 GMC terrain but is going to be different because the 2008 and 2009 do not have a high pressure fuel pump like this one does . This information will be also very useful for cleaning the PCV valve on the 2.4 eco-tech so pay attention to what I say and how I talk about it and hopefully we can keep your vehicle on the road for many more years. I appreciate you taking the time to watch the video God bless and have the best of days
if you own a 2010 GMC terrain,2011 GMC Terrain, 2012 GMC terrain ,2013 GMC Terrain, 2014 GMC Terrain, 2015 GMC terrain ,2016 GMC terrain ,2017 GMC Terrain, 2018 GMC terrain ,2019 GMC Terrain
You should watch the whole video .(sometimes I’m fun) So you can inform yourself with all the great information that I put in my videos and God bless. I hope the videos helpful for you!
And Thank you for viewing!
Have a great day
“You can’t really break it if it’s already broken!”
Please subscribe!!!
if you want to reach out to me and get a message to me hit me up on clays ac and auto repair on the facebook And if you have any questions it’s easier to message me straight through Facebook
Why should you Subscribe to my channel ? I constantly make these videos that show you how to use your tools and show the techniques that we use in our auto repair shop every day. And all it does is help me send you stuff . I do not sell your information I do not solicit you. all it does is add a couple 100 thousands of a cent to me . And it cost you Nothing ! you would only be helping me . And hopefully i was able to help you !! So please be kind and enjoy!!
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products
List of cars names
Chevy trailblazer ,GMC envoy , Cadillac Sts ,Cadillac SRX ,Cadillac Escalade, Chevy avalanche ,Chevy Silverado ,GMC sierra ,Toyota RAV4 ,Honda CRV, Acura MDX, Volvo XC 90 Volvo S 70, Audi A4 , Audi asix Audi S4,Volkswagen Passat, Volkswagen tiguan Chevy Equinox ,GMC terrain , Chevy Silverado, GMC sierra, GMC Acadia ,Chevy traverse,Pontiac Grand Prix ,Pontiac G6, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018Jeep grand Cherokee ,jeep commander ,jeep liberty,Jeep patriot, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018 Chevy impala ,Chevy Malibu, Ford F150, Ford escape ,ford fusion ,ford Taurus, Dodge Nitro ,Chrysler 300 ,Dodge ram. Pontiac Sunfire, Pontiac Torrent

Авто/Мото

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 111   
@sharpcarco
@sharpcarco 2 года назад
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Thank You! DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ 5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
@sherriebays99
@sherriebays99 Год назад
Thank you so much for this video! I watched it about 10 times and followed it step by step. I needed to know how to get down to the fuel rail pressure sensor which is under the intake manifold on my 2013 Equinox. I also followed your advice and cleaned the PCV valve which was totally clogged. I am a single mom and money is tight, so many thanks for saving me from a big repair bill. God bless and keep doing what you’re doing!
@eugenionegron4828
@eugenionegron4828 3 года назад
Your Video is perfect and the Explanations are wonderful But the sound is terrible it goes from low to high, but I learned anyway, Thank you so much
@sharpcarco
@sharpcarco 3 года назад
Yeah I was having some very bad technical difficulties a couple of videos with my volume and I had to figure it out really sorry
@sharpcarco
@sharpcarco 4 года назад
Having trouble with your GMC Terrain starter? Watch this video where I show you how to remove it EASY! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D0LHjP-887k.html
@eugenionegron4828
@eugenionegron4828 3 года назад
Don't worry it's ok, God Bless
@claytondales3011
@claytondales3011 4 года назад
This looks like a huge pain to disassemble and I’m sure it’s the same to put back together. Instantly regret buying a terrain
@sharpcarco
@sharpcarco 4 года назад
I regret it every time one of my customers buy one too....
@GvillBoy
@GvillBoy Год назад
@@sharpcarco I did it yesterday. It's easy.
@toddcanipe1190
@toddcanipe1190 Год назад
@@GvillBoy I'm doing it now. There was so much pressure coming out of the oil cap when we took it off and the rear main I believe is leaking so I'm hoping we clear it and the seal doesn't blow.
@toddcanipe1190
@toddcanipe1190 Год назад
@@GvillBoy did you have to disconnect the fuel pump lines
@mcelroystube
@mcelroystube Год назад
Actually really easy
@joogullae3456
@joogullae3456 Год назад
I've looked everywhere online and can't find what the normal data should be using an OBD2 scan tool to read the datastreams so I can compare and make sure everything normal. Do you know where I can find this+
@lito4u
@lito4u 3 года назад
Thank you very much sir real good video
@RobertBrownbrowncone
@RobertBrownbrowncone 3 года назад
Great video,thanks
@darkdimensionshauntedhouse
@darkdimensionshauntedhouse 8 месяцев назад
what is the torque spec of the intake bolts?
@shaungriffin4617
@shaungriffin4617 3 года назад
I'm an owner not a proud owner
@sharpcarco
@sharpcarco 3 года назад
Yeah I’m pretty sure I was being sarcastic
@claudehuffman4452
@claudehuffman4452 8 месяцев назад
At 3:35 could you please tell what that line is called i managed to break it and can't figure out what its called?
@ShortCircuit1987
@ShortCircuit1987 3 года назад
Just came across a warning when looking up pricing for a high pressure fuel pump. Apparently that short intermediate metal fuel line MUST be replaced when removed. Any reason as to why that may be?
@sharpcarco
@sharpcarco 3 года назад
Yeah a couple of people have said that same thing to me I’ve personally never replaced them and I’ve probably removed about 50 or 60 of them I don’t know why they do that I can’t see any reason for it other than if when you go to tighten up the line nuts the Line needs to be square meaning when you’re tightening up the nuts hold the line and let it go into the position that the nut drags it too if that makes sense
@jimtuura5960
@jimtuura5960 3 года назад
If you just pull the transmission out it makes it a lot easier to change the back tire
@sharpcarco
@sharpcarco 3 года назад
Huh .....
@jeffbensoutdoors1623
@jeffbensoutdoors1623 Год назад
I cleaned the pcv system even drilled out the intake hole but after I got it all together the engine makes a whistle sound it will stop if I pull the dipstick or crack open the oil fill cap ? If it’s cold no sound but as soon as it warms up whistle sound what do you think
@toddcanipe1190
@toddcanipe1190 Год назад
At 6:09 those two nuts you are removing. I don't even see that part in my vehicle? It's a 2013 2.4 terrain.
@sharpcarco
@sharpcarco Год назад
Maybe they didn’t put them on the 2013 the intake still comes off the same way because it’s the same intake it’s just things are located in different places on different years
@toddcanipe1190
@toddcanipe1190 Год назад
@@sharpcarco thanks. Our intake manifold is off the pcv port was completely covered. Hoping to put it back today and install a catch can to help prevent the problem in the future.
@charlessalvo5216
@charlessalvo5216 3 года назад
Hi, just curious, does this impact a 2017 gmc terrain 2.4 4 cyl? How can I tell if I am having any issue and what other issues are you aware of on this vehicle? Thank you!
@albinojr72
@albinojr72 Год назад
Have u come across a chrysler 300 with the 3.5 that continues to run rich on one bank after all the normal replacement of o2 sensors and plugs
@sharpcarco
@sharpcarco Год назад
Leaky injector, possibly or a vacuum leak or an intake leak
@albinojr72
@albinojr72 Год назад
@@sharpcarco will look into that thanks
@galax-mc8jw
@galax-mc8jw 2 года назад
Inge buenas tardes tengo una gmc terrain 2.4 modelo 2011 y cuando enciendo el modo ecotec bajan las revoluciones de 700rpm a 540 rpm empieza a temblar y estrecer como si quisiera apagar y me falla tambien me quema aceite usa 5 w 30 dexus me pudiera ayudar por favor que checariamos por que no le hayamos ya metimos escaner y nada le agradezco tambien prendo el clima y suben las revoluciones espero su amable respuesta.
@taylorchandler7132
@taylorchandler7132 3 года назад
I got a 2012 terrain with a 2.4. I have a misfire on number 2. Car is saying service stabiltrak. I replaced plugs and number 2 coil pack. It’s still missing. At times, it seems it’s trying to clear up. Any ideas?
@1tokeover
@1tokeover 2 года назад
It's unreal how big the intake system is on this 4 cylinder; It doesn't seem to end. How did they manage to make it so that a 4 cylinder is somehow shoehorned into the engine bay of a mid sized SUV?
@sharpcarco
@sharpcarco 2 года назад
The longer and the larger the intake is the more torque it has. It also needs them large runners to have Air energy when the valves open and close
@stephanieburton1157
@stephanieburton1157 Год назад
I have a 2013 GMC Terrian that keeps bucking and stalling while in drive. It idles fine when it’s in park? Could this be a sign of the transmission going out?
@jacoblaswell6272
@jacoblaswell6272 4 года назад
Worms have 8 hearts wow lol
@sharpcarco
@sharpcarco 4 года назад
🤷🏻‍♂️ Who would’ve knew lol
@joogullae3456
@joogullae3456 Год назад
Hey Sir thanka for this, we took out the manifold and cleared the pcv hole that was severely clogged because our engine statted gushing oil after an oil change for some reason. Anyways I wss wondering if theres anyway to be able to tell if we've fixed the problem by having the normal datastream numbers using an OBD2 reader for the absolute intake manifold pressure? Or anythinf else? I don't have a tool to be able to read the crankcase pressure and I'm too broke to get one or take it to the shop. Any information would greatly help.
@brittanybella2514
@brittanybella2514 4 года назад
My 2014 GMC Terrain 2.4 no flex fuel has two fuel pumps located on the tank do you know why? My mechanic is replacing my fuel pump after replacing fuel pressure sensor cam shaft sensor omg tons of money and my car still will not start, he says there’s no gas getting to the engine (he called it something else) but which fuel pump do I replace is there’s two on my tank (he pulled it off from under the car towards the rear) pls help
@markfiorella7447
@markfiorella7447 4 года назад
why cant i leave the oil dipstick up a little bit
@sharpcarco
@sharpcarco 4 года назад
Most of the time the tips of them break off inside the oil pan when you try to remove them you can certainly move it out of the way if it’s possible
@alvarezcarlos3820
@alvarezcarlos3820 3 года назад
? Having a problem with the equinox 2012 2.4 when I take the oil stick out sound stop in sounds like a whistle noise it looks like it come from bottom of engine rear?
@crazyloki5819
@crazyloki5819 2 года назад
Plz try to cover in the future videos torque sequences and what the intake is torqued to . Just saying this video was great and very complete but I watched the video for the torque sequence and what to torque it too . Thank you Loki With Loco Loki's customs
@sharpcarco
@sharpcarco 2 года назад
Well Travis I greatly appreciate the suggestion but unfortunately I’ve tried to do that in videos in the past……. There’s a couple of scenarios that end up happening when you give people torque specifications…… They look them up on Google and then either ask you which one they should use the one that Google says or the one that you said in the video……. Before thinking about the question the ultimate answer would be well what I did in the video worked…. Or someone says : I googled it and you’re wrong I’m sure glad that I did not follow your instructions……. People like that forget these are free videos that we make and often there are mistakes in videos nobody’s perfect. Often times after years of doing RU-vid like me you realize that you can do things better and you try to constantly improve your videos and your channel but while doing so it takes up even more and more of your time to make repair videos that most of the time people skip through. Unknowingly not helping the person that made the video so you were able to repair your vehicle you don’t end up making money so you have to stop somewhere and consider not doing repair videos any longer it’s a real shame but it is what it is people expect things for free and don’t want to work for any of them. I greatly appreciate your comment and you’re Suggestion but I’m probably not going to put torque sequence is or specifications in my videos because of these reasons
@eddiereichel9354
@eddiereichel9354 2 года назад
Tighten until the crack.
@DJR5280
@DJR5280 2 года назад
Just tighten them by hand. Sug am up but don't over tighten because these bolts don't take much torque. I usually start with the center bolt and work my way to the outside of the intake. First pass I tighten all by hand and second pass so snug them up.
@cc-uo9se
@cc-uo9se 3 года назад
Your video was helpful explaining where the HPFP is located and removing it, but doesn’t specify on how to replace it. I would like to tackle this project myself, and seen some video speaking of the camshaft lobe and being in the correct position. My question is, do I have to rotate the engine or mess with the camshaft lobe when replacing the HPFP? Thank you Are you still in GR? What would you charge to change this on a 2012 GMC Terrain 2.4?
@sharpcarco
@sharpcarco 3 года назад
Well what they mean by the camshaft low being in the proper position is that when you go to put the fuel pump on if it’s actuating the fuel pump then it will be difficult to get the screws in and you would only need to turn the motor a little bit to be able to make it easier but it is possible regardless where the camshaft is located at. That’s why I did not mention it, I would guess to replace that probably wouldn’t be any more than 100 or $150 plus the price of parts unless you have your own
@cc-uo9se
@cc-uo9se 3 года назад
@@sharpcarco do you have a method I can reach you at? I don’t have Facebook or any other social media to contact you on besides RU-vid. Thank you!
@sharpcarco
@sharpcarco 3 года назад
Yeah you can get me at email thenewclayway@gmail.com
@IlgarTaghiyev
@IlgarTaghiyev 2 года назад
Thanks!
@toddcanipe1190
@toddcanipe1190 Год назад
Do you have a reassembly video?
@sharpcarco
@sharpcarco Год назад
No, but it goes back together the same way I took it apart
@toddcanipe1190
@toddcanipe1190 Год назад
@@sharpcarco yea we just watched it backwards lol
@alonsoleein6307
@alonsoleein6307 2 года назад
Good info step by step blessings dude
@sharpcarco
@sharpcarco 2 года назад
Well thank you for the comment and welcome to the channel I’m glad the video was helpful for you
@claytondavis4869
@claytondavis4869 3 года назад
How do you relieve the fuel pressure
@sharpcarco
@sharpcarco 3 года назад
Crack the line open, If you’re worried about it getting on the ground put the catch pan underneath the vehicle crack it open gently and it will trickle out crack it open quickly and it will spray out quickly and last for about two seconds
@terrycarlton6991
@terrycarlton6991 Год назад
When you reattach the high volume fuel pump, you don't have to worry about turning the cam shaft correct ? You only do that when installing a new pump ? Also do you have the torque specs for the various bolts including the throttle body ? Thanks for this video !
@shaundrezek4330
@shaundrezek4330 Год назад
It's possible. I have a 15 that everyone tells me the oil consumption issue was fixed but I'm having to put a quart in every time I fuel up
@tongasamoa89
@tongasamoa89 3 года назад
I have gmc terrains are the worst most expensive service repair for a piece of crap I’m trading mine this summer
@Adjustmint
@Adjustmint 4 года назад
HELP? (2012 Equinox) My car stalls on me when I start it up. If I dont let it idle it and go to take off it Boggs down and tries to die. I've replaced everything listed by myself. It's been 5 months and I'm still trying to get down to it. It has 110000 miles and all started at around 100k. Also it all started when I got a code P0420 which is why I replaced catalytic converter and o2 sensors. But I still have the code and still have problems. Other than that code nothing else shows up on my scan tool. •Parts replaced• MAF Sensor Exaust Manifold (it was cracked) O2 Sensors (upstream was blown) Catalytic Converter (looked fine replaced it anyways with a rock auto one) Intake manifold (looked okay besides the orfic may have been clogged) Both Intake and exaust Actuators Throttle Body Purge Valve
@sharpcarco
@sharpcarco 4 года назад
That orifice being plugged on your intake that I show you in this video could be part of your problem. It’s also very possible that your timing chain guide is broken and needs to be replaced as well so you would have to do the whole timing chain I should have video up of me doing a timing chain and one of these next week it’s a pretty simple process for the most part or for at least On these particular vehicles there not that hard
@Adjustmint
@Adjustmint 4 года назад
@@sharpcarco yea I doubt it's the orifice because put a whole new intake on. I do have that white creamy substance. But there is air coming from the PCV now that I replaced the old intake.
@sharpcarco
@sharpcarco 4 года назад
Do you possibly have a blown head gasket?
@Adjustmint
@Adjustmint 4 года назад
@@sharpcarco No. Not blown. Oil is fine looking
@abc506891def
@abc506891def 4 года назад
@@sharpcarco Will be watching for 2.4L ecotec timing chain swap
@TSkyravin
@TSkyravin 2 года назад
Been having a lot of oil consumption as of late. Will this help with that?
@GeorgeLanivich
@GeorgeLanivich 2 года назад
Awesome explanations
@sharpcarco
@sharpcarco 2 года назад
Thanks Ivan we greatly appreciate it and we’re happy to have you bored on the channel
@maloosecat123
@maloosecat123 Год назад
Clay, can you please help? I have a 2013 Terrain 150k miles a serious oil burner with piston ring problems...lately it's throwing a P0303 third cylinder misfire code with a flashing CEL. car is just clunking along..I did change all 4 coild packs and the exhause solenoid but misfire at cylinder 3 still won't go away...it's not spark plug either, (I swaped them) ...any tips or ideas what to do would be appreciated..thanks for your awsome videos...
@sharpcarco
@sharpcarco Год назад
More than likely, the rings are so bad it’s not able to create the type of spark or compression that it needs or the valve seats are just gone.
@maloosecat123
@maloosecat123 Год назад
@@sharpcarco so basically a new engine will be needed …
@maloosecat123
@maloosecat123 Год назад
@@sharpcarco so Clay does this mean new engine or can I rebuild it? I am a good Diyer...thanks
@chewbitwing1844
@chewbitwing1844 2 года назад
And yet you did not identify the PCV valves and show locations.
@sharpcarco
@sharpcarco 2 года назад
Oh I certainly did. You might’ve been skipping through it I’m not sure I probably didn’t spend a lot of time on it because it wasn’t necessary it’s a tiny hole
@Robert-lf9jg
@Robert-lf9jg Год назад
I'm having the same problems with my Gmc terrain it runs good until I come to a stop then the engine reduce power comes on and then the car dies I changed the camshaft solenoid but still keep doing the same thing so I cleaned the throttle control still doing the same thing I'm not a mechanic but I can probably change the throttle control completely do you think that will work because I can't do all what you just did in that amazing video please let me know I don't have much money I really need your help it's just me and my dog so nobody else to help me thanks for your time Robert
@abrahamguerra5069
@abrahamguerra5069 Год назад
Try cleaning fuel injectors manually sometimes it can get clogged
@sbond1963
@sbond1963 7 месяцев назад
Fuel pump follower can cause that
@kieldahl7934
@kieldahl7934 3 года назад
I would love to finish your video as I'm sure it has the knowledge and learning I need but I can't handle the volume of your voice going from quiet to loud to quiet to loud... c'mon guy...
@sharpcarco
@sharpcarco 3 года назад
Sorry I don’t have a ton of money ........ just a bunch of stuff rolling around in my head . These videos pay about 2/10 of a cent per view good equipment to make cost thousands. Maybe someday I will sorry
@mariomorales5116
@mariomorales5116 3 года назад
And terrain 3.0?
@Cameron_J
@Cameron_J 3 года назад
Not trying to be a Karen, but GM has a TSB about the use of those green scrubbies. GM states in the FSM that the line feeding to the fuel rail from the high pressure pump needs to be replaced if you disconnect it, so it's better to just leave it in. Although since you are using a pry bar to remove the intake manifold, I believe zero shits have been given at this point. I'll admit the first couple times I pulled one out it was a bear, that's why the FSM procedure calls for an evac and removal of the AC line. Tearing up the intake during the repair will be extremely counter intuitive if your trying to save time and money by not removing the AC line. Having said all of this, the video was great, thanks for sharing.
@jessicacarver6022
@jessicacarver6022 2 года назад
Hey just a question seems like you know a little about GMC Terrain sle-1 2.4 L 4 cylinder Ecotec SUVs I have a 2010 it was stalling and shutting off while I was in the Drive-Thru and would blow a cloud of smoke out the back once I did get it started it smelled like gas badly when that happened the mechanic I took it to told me I needed to get a new fuel pump when I went to pick up my car it was still doing it it would barely crank without stalling out he hooked it up to a computer and the codes that were showing was p228c & p00c6 do you happen to know what that means or what the codes are wanting me to fix could it be a faulty fuel pump I'm pretty sure he got it off eBay
@Cameron_J
@Cameron_J 2 года назад
@@jessicacarver6022 P0228 is most likely a dirty throttle body. Have the throttle body cleaned. The low pressure code could be many different things, faulty fuel rail sensor or a clogged screen on the low pressure fuel pump, etc. Hopefully you had the timing chain replaced already, because they usually fail on these before 150k miles. Change the spark plugs, Intake and exhaust Camshaft solenoid actuators, engine air filter, and inspect the oil filter for metal particulates. I find that it is a lot easier to test the oil for fuel to diagnose the HP Fuel Pump: Change the oil, and collect an oil sample and send it to Blackstone labs. They will test the oil for wear metals, and tell you how much fuel is in the oil. If it's high, there's a good chance the high pressure fuel pump is dumping fuel into the crankcase. It's only around $40 for the test and the information gleaned is invaluable. If he tells you there's high wear metals, it's better to have the engine replaced or send it to the scrapyard. Also I forgot: You should have had an extended warranty per TSB (only because of a class action lawsuit😂) for the oil consumption. Was any work done for that? Any timing chain work?
@jessicacarver6022
@jessicacarver6022 2 года назад
No I've never had any work done for the lawsuit new throttle body and yes the oil smells like gas bad
@Cameron_J
@Cameron_J 2 года назад
@@jessicacarver6022 The hp fuel pump is most likely shot: replace the hp fuel pipe at the same time. It has to be installed at the proper stoke. If your certain no work has ever been done to it, I'd bet the timing chain is going too. Better to get it before it completely fails as its an interference engine, and when it fails it will take valves/rods with it.
@donniemadewell7941
@donniemadewell7941 4 года назад
My clutch aint working on air
@juniordelgado6015
@juniordelgado6015 3 года назад
How do you relive the fuel pressure for the high pressure fuel pump?
@sharpcarco
@sharpcarco 3 года назад
There is a Schrader valve that you attach your fuel pressure gauge to I don’t usually do that I just loose in the nut on one of the fuel lines........ i’m not saying that’s the only way you can do it. That’s just the way that I personally do it I thought I explained that in the video
@madflyer1093
@madflyer1093 3 года назад
alldatadiy says to disconnect the fuel pump power harness and to run the engine till it shuts off.
@abc506891def
@abc506891def 4 года назад
Would adding a catch can be beneficial?
@cswann8
@cswann8 3 года назад
Yes...very. I have one on my Terrain and it's keeping a LOT of crap from getting dumped back into the engine.
@hollerican
@hollerican 4 года назад
Do I need to buy a new manifold gasket for the re-install?
@sharpcarco
@sharpcarco 4 года назад
I think you’re gonna have to go back and watch the video because I explain that
@hollerican
@hollerican 4 года назад
@@sharpcarco I justed needed confirmation... It just feels werid to not replace it lol.....my dam oil sending sensor is leaking and you have to take off intake manifold to get to it....fml
@sharpcarco
@sharpcarco 4 года назад
Well like I said in the video I think they’re replacing it is not a bad idea but it is not 100% necessary because nickels and dimes add up to dollars it’s really a just an opinion of mine I very very seldom ever replace them to save me or my customers a couple of dollars knowing that it is a possibility that I may need to Replace in the future but because it’s what I do for a living it’s not really a problem for me I did feel like I described it fairly well letting you know if you should replace it or not so it’s up to you if you’re worried about it leaking replace it
@hollerican
@hollerican 4 года назад
@@sharpcarco it worked, ty sir
@toddcanipe1190
@toddcanipe1190 Год назад
At 3:51 when we were pulling out the connector, one of the pins inside broke off and we are unable to find it. Can you tell me what affect this will have on the car?
@Carolina_Tripping
@Carolina_Tripping 2 года назад
Get to the point
@sharpcarco
@sharpcarco 2 года назад
Sometimes I just have a lot to say. Hopefully you still got some useful information from the video!
@fritzgrigsby
@fritzgrigsby 3 года назад
Wow the useless facts at the bottom are soo distracting. Why would you do that? Do you want people to not pay attention to your videos?
@sharpcarco
@sharpcarco 3 года назад
Well personally my channel is about empowering people. So that’s one reason , Second these are repair videos and when you have to repair your vehicle it’s not always fun. So sometimes I like to add a little bit of a different flavor to my videos. Third most videos make about 2/10 of a cent per view and you need to gather retention from viewers so I add the fun facts down at the bottom for retention. So hopefully the video can make 4/10 of a cent. The hopes are that people have to watch the video twice and they learn something that may help them out in a social situation There are over 35 million RU-vid channels and you wanna make your channel different than other peoples channels some people like it some people don’t but that is some of the reasons why I do it
@xxxDlewisxxx
@xxxDlewisxxx 4 года назад
If the rear main seal is leaking will it need to be replaced ? Or will cleaning the PCV valve relief the leak issue.
@sharpcarco
@sharpcarco 4 года назад
Regretfully the engine would have to come out and you would have to replace it but it wouldn’t hurt to try to clean it but I don’t think it’s gonna work sorry wish I had better news for you Lew
@xxxDlewisxxx
@xxxDlewisxxx 4 года назад
@@sharpcarco Figures Thanks man!
Далее
GMC Terrain 2.4 Clogged PCV | Oil cap pressure REPAIRED
17:22
Учёные из Тринидад и Тобаго
00:23
БАГ ЕЩЕ РАБОТАЕТ?
00:26
Просмотров 111 тыс.
Terrible News for Scotty Kilmer Viewers
10:43
Просмотров 148 тыс.
Dave's 35 Year Journey from a 1 Bay Storage Unit!
16:41
Chevy Equinox/GMC Terrain PCV Orifice Cleaning
9:56
Просмотров 112 тыс.
2010-2014 chevy equinox Cleaning PCV valve.
9:12
Просмотров 230 тыс.
Разве колеса летают?
0:15
Просмотров 2,4 млн