Guys, here I am going to show you how you can integrate GNS3 with Palo Alto VM and prepare your labs for practice.
Minimum PC requirement:
1. 2 core CPU
2. 4 GB RAM
Below are some of the commands that we have to use for initial setup:
3. Power UP the FW and enter "enter" about 500 times until the prompt becomes as PA-VM (or simply wait for 3 to 5 minutes) and then login with admin/admin
4. Set the cli dimension as follows:
set cli terminal width 500
set cli terminal height 500
5. Setup the IP/netmask/gateway/DNS as following (the IP should be in the same range as the MS Loopback and the gateway should be MS Loopback's IP)
configure
set deviceconfig system type static
set deviceconfig system ip-address 10.0.0.12 netmask 255.255.255.0 default-gateway 10.0.0.2 dns-setting servers primary 4.2.2.2
commit
6. Let the changes be committed/saved and then open the Firewall's URL via the browser
Download PANOS 8.0.1 from the following (This link is not affiliated by me, I just found this link for downloading the OS):
www.networkhun...
14 окт 2024