Go Check THIS Right Now! Are You Missing This Grease Plug? (STOP Premature Head Failure)

Подписаться 691 тыс.

Просмотров 28 тыс.

50% 1

This grease plug (collar screw or screw plug) can easily fall out if loose and MOST PEOPLE DON'T EVEN KNOW IT'S MISSING!! BE WARNED that dirt and debris will mix with the grease inside the gear case to become gritty and cause wear and tear on the gears. This will cause your trimmer head to wear out prematurely. This applies to straight shaft weedeaters, trimmers and brush cutters.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅CLICK HERE FOR A NEW SCREW PLUG ➜ amzn.to/3NqiFV0
✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com...
For more videos like this, check out:
👉How to Adjust or Tune the Carburetor on a Leaf Blower ➜ • Maximize Leaf Blower P...
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ • CORRECT WAY To Adjust ...
👉How To Adjust Or Tune The Carburetor On A Weedeater ➜ • How To Adjust Or Tune ...
🔧WELCOME to the Steve’s Small Engine Saloon RU-vid channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmall...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
✅Follow Steve on TIKTOK ➜ / stevessmallenginesaloon
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmal...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #diy #fix #troubleshooting #howto #engine #howitworks #doityourself #lawnandgarden #stihl #husqvarna #echo #trimmer #weedeater #brushcutter

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 217

@StevesSmallEngineSaloon Год назад

✅CLICK HERE FOR A NEW SCREW PLUG ➜ amzn.to/3NqiFV0 ✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com/shop/stevessmallenginesaloon For more videos like this, check out: 👉How to Adjust or Tune the Carburetor on a Leaf Blower ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DWPUYJiF6KM.html 👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M6T5JoGXcHY.html 👉How To Adjust Or Tune The Carburetor On A Weedeater ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gmhxTvGRtCg.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon ✅Follow Steve on TIKTOK ➜ www.tiktok.com/@stevessmallenginesaloon

@BrianMiller1973 Год назад

A drop of Loctite 243 on the threads of that plug might be a good idea too.

@kevinhitt719 Год назад

not sure how good of an idea it is but I drilled the plugs on mine and taped a zerk fitting into them makes it real easy to grease

@lnk4328 Год назад

Stihl should paint the plug orange to make it more noticeable.

@jacksimper5725 Год назад

I replace the plug with a grease nipple . Makes life easier and is a visual reminder to grease the damned thing .

@lailer1975 Год назад

Good idea, but I think it’s a special compound not readily available in a tube.

@Jay_Ira Год назад

Got a part number for that grease nipple?

@greybeard5774 Год назад

@@lailer1975 Well I would add a bit of transmission oil in a head .. makes grease work better

@darylpacker4703 Год назад

I bought a grease nipple and replaced the bolt. So can just use a grease gun at the start of each season

@barrylee.freedman2203 Год назад

My apologies. Right after hitting send (prior)I thought of my manual (RedMax BCZ260TS). Lubed for long term use but check for 3/4 full with lithium grease.

@Rslibertyturbo Год назад

Hey Steve, I have shindiawa straight shaft, I found a grease nipple with the correct thread for my gearbox, so easy to grease that way! Makes better edges😏

@OuttaHere7 3 месяца назад

Please show how to add a Zerk fitting to the Echo SR225/gear head now that the bean counters at Echo and Stihl don’t provide a grease port any longer. What size Zerk fitting would be best? Thanks!

@davidedgar2818 Год назад

It is amazing how many people miss this very important point by Not Reading the manual. This is such an important point when a commercial grade machine costs so much. My neighbor on an adjacent farm didn't even know that this grease point was so important. He burned out two gear heads and no body told him why. I have developed an easy fix to grease this hole. I get a grease zirk thread it into a standard faucet washer through the flat side, then the curved side of the washer seals against the greasing hole no matter what size. Just pump the grease through the head until it comes out clean.

@rutbuster1 8 месяцев назад

Some of the newer models don't even have grease plugs now. They have the spot for it but no grease plug. It's solid. I tap and die em out for either a plug or a zerk fitting. Takes about 15 minutes.

@williepelzer384 Год назад

I have a fs, 56 rc I've always wondered about this issue. No plug or zirc fitting. Please help me understand. I know it needs lube , but how????

@barrylee.freedman2203 Год назад

I have Mobil 1 Synthetic Grease for my Tacoma drive shaft. Would this work for a string trimmer head? I know there’s so many videos on this but I’m wanting to get my info from a trusted source (like you). Also how much is required.

@phildelgiudice3448 Год назад

Classic homeowner abuse? Take 5 minutes after every use to clean, inspect and lube the machine. Extend lifespan by 10 years!

@rutbuster1 9 месяцев назад

Just my two cents: I put zerk/grease fittings on mine. Two to three pumps and done. Some of the newer trimmers don't even have a grease plug in the gear case. It's a solid mold. On one's like that, I tap em out for a zerk/grease fitting or a plug.

@delbridge11l Год назад

Hey Steve. Got a stihl 110 weed eater. It does a funky sputter and looses power under heavy load comes out of it with full throttle no load also does seem ever so slightly sluggish punching the throttle. Thing your carb adjustment process would get er fixed up

@petepeabody8905 Год назад

hey Steve is there a bolt with a grease fitting on it for this Stilt trimmer/brush cutter??You know how lazy people "me/I" can be about then removing to service this with grease.. Thank you for your time

@keithpowell2786 Год назад

Hi Mr Steve, I have a Stihl FS 70 trimmer and it doesn’t have a plug, I even get a tube of grease one day this winter when I was just walking around our local dealer and got home to check the grease and I had no plug in the head, do you have any ideas of how I could check my grease. Thanks for the help and love the channel.

@chubbyjohnson5480 Год назад

First thing I do on a new trimmer is put a nipple in there with a Loc Tite on it. It's served me well. I loved my old RedMax. It had a nipple on one side, a plug in the other. You could drive out the old grease.

@okanaganpeterjames Год назад

How do you clean a brush cutter that is covered in dried green grass and. Rush debris. It has created a coating on the shaft that is like enamel. Gasoline? Carb cleaner?

@NotALot-xm6gz Год назад

The FS55 I have doesn’t have the grease port, so I remove the gear head twice a season and fill it full of bearing grease.

@bradpool127 Год назад

Found a youtube video a while ago about the opposite of this problem. A guy made a video on how to put a grease nipple into that housing so he could pump it chock full of grease under pressure. I think some people need to know what the instructions say.

@jeffreywaynebehnke9303 Год назад

Why wouldn't you install a grease zerk?

@dloregon Год назад

I have a FS 56 I believe,, it has no grease port on it,, wondering how to grease the gears in it.. Can't find any info on it. Can you make a video on that, am sure I am not the only one with the new weed eaters that don't have a grease hole.. Thanks for the videos you do.

@Michaelsmith98453 Год назад

Hello,i have a problem with my riding mower,basically i was starting it to move it inside the shed when i heard strange sounds from it so i looked under and noticed that the thing (dont know the exact name )with the two pulleys had fallen off the engines crankshaft along with a key and a bolt,do i just have to put the key in and bolt it on and then re attach my two belts back on to the engine pulleys?

@OuttaHere7 2 месяца назад

Steve!! Stihl and Echo have deleted the grease port! Do a video on greasing this type please.

@BG-vq9fd Год назад

I used to stop at every Stihl dealer I went by to find things I did not have. The grease was 1 of those things.

@StevesSmallEngineSaloon Год назад

Right on

@brandonstclair6530 Год назад

I wonder why they don’t put a grease fitting on there anymore. I have two old green machine trimmers and they have a grease fitting on the gearbox.

@karsoncampbelllogginginc Год назад

How come some spacing saw guards have a 🚫 on the guard for a bush blade

@danielsmith8659 Год назад

Why does my head which is identical to that one not have a grease port at all. It doesn’t have one …. And yes it’s a professional , not a residential .

@terryessary805 Год назад

Can you put a zerek grease fitting in place of the plug?

@aw738 Год назад

My Stihl doesn't have a grease plug. I there a way to add grease to it?

@PePe_LePew Год назад

Mine doesn’t have one. My old one did but I bought a brand new one and there’s no grease hole period

@oilhammer04 Год назад

I replaced my plug with a grease zerk.

@Herbybandit Год назад

I've had a number where the plug has never been out and the grease inside is all dehydrated and also doing nothing. It's important to check it once in a while and top it up if needed.

@kevinorr6880 Год назад

When you take the head off, do you grease the cable?

@alandanner7566 Год назад

Steve. You are "The King" of You Tube small engine repair information! Thank you!

@StevesSmallEngineSaloon Год назад

WOW! Thank You...and You're Welcome...

@rdhoy Год назад

I drilled and tapped mine, and inserted grease zert

@sapelesteve Год назад

Now that was interesting Steve & I have never seen that before. I will have to check to make sure that the plug is still on my trimmer! Thanks for the heads up! 👍👍

@StevesSmallEngineSaloon Год назад

You're Welcome...

@billkrause4585 Год назад

Hey Steve, why not just installing a zert fitting instead?

@happycamper6352 Год назад

It's a great idea if everyday grease is ok for that application, but I don't know enough about grease to say if it's ok or not. Also, the threads may be different then typical grease fitting sizes; might have to drill and re-tap, possibly sending metal chips/shavings in there where they could damage the gears/bearings. I still like the idea though; maybe worth doing if done well.

@cliffgrexton3760 Год назад

Why not put a zerk fitting in and use a grease gun

@Bradwick1 Год назад

BTW the 8 point Stihl blade works on small trees better than the blade thats shown here. The 8 points are also far enough apart that it can be sharpened easily for extended life. Works best at high RPM then wave it across the tree kinda quick. Ive cut many Japonica Honeysuckle bush trees up to about 2-3 inches diameter with this technique. Have to pull the root out as poisons do not penetrate the ground fast enough and the roots will either go down or lateral and it will start new growth.

@ronstewart5750 Год назад

Can the head assembly be taken apart and cleaned

@jstpsgthru Год назад

Thanks! Got a torque spec on that, assuming lube will affect it?

@rossmckenzie2283 Год назад

Is that a saw blade on that weed wacker?

@tkskagen Год назад

I never understood why there was never a Grease Fitting... So I added one to mine with a cap!

@happycamper6352 Год назад

Yes, but is it ok to use regular grease? I honestly don't know.

@Joe.Doucette Год назад

I try to keep a good eye on my 23 year old FS55 but just because it's you I went to the shed and checked. It's still there. Here's a question... how often should the head be topped up with grease (or flushed and re-greased)? Yes I HAVE topped it up a number of times in the last 23 years but maybe I can get another 23 years out of it. That would make me 88 years old then and I have my doubts if I'll be able to use the old gal by then. ;) Have a good one.

@briantayes2418 Год назад

Hey Steve, what type of grease should be used, NLGI 2 or 00?

@syntom1 6 месяцев назад

Thanks for all these videos. Saved me lots of grief and money!

@StevesSmallEngineSaloon 6 месяцев назад

You're Welcome...

@comlbbeau Год назад

I just removed mine and re-greased the trimmer head, part of my Spring ritual when putting my equipment back into service. Year over year it doesn't seem to take much grease, but at least I know I haven't neglected it.

@StevesSmallEngineSaloon Год назад

Right on

@timhawkins2502 Год назад

I took mine out and put in a grease zirt fitting

@Tarkus_ Год назад

I've never lost the grease plug, but I have gone through a couple heads over the years, probably due to not greasing them. I now have the Stihl grease tube, and grease them at least once per season. It seems a little expensive for a small tube of grease, but it lasts for years, so it's not a big deal. And it's handy that it screws right into the grease plug fitting, so the convenience is well worth the cost. There are certainly cheaper ways of getting grease in there, but IMO, it's a great investment, because of the ease of use and how long it lasts for its purpose.

@kirdot2011 Год назад

i dont think my trimmer has that large of a metal screw there, but now that i think about it ive never greased it through that point there either

@Mechanicturfgear Год назад

Skip the plug and install a zerk 👍

@tadeuszmichaelwlodarczyk3120 Год назад

THANKS for the Tip will check it. Never Knew about it. Mine is a FS81. HOW Old is it?? Steve. From Melbourne AUSTRALIA 👍

@coryparni3620 Год назад

Yep lost one of mine

@rodwilliams5074 Год назад

I installed grease nipples to my pair of Honda's.

@StevesSmallEngineSaloon Год назад

Right on

@kerrymehaffey6257 Год назад

Zerk fitting ?

@stevengentry8648 Год назад

Thanks for your help,Steve

@StevesSmallEngineSaloon Год назад

You're Welcome...

@TheAncientOneYT Год назад

@0:33 That's what she said Steve

@kbjerke Год назад

Blue LocTite, *AT LEAST!!* Thanks, Steve!

@russellyoung2900 Год назад

Agree, Blue loc-tite is removable for the next check/fill

@kbjerke Год назад

@@russellyoung2900 I'm not *totally* evil. 😁

@StevesSmallEngineSaloon Год назад

Great idea!

@deanmsimpson Год назад

Hi Steve and guys...Does anyone replace the plug with a grease nipple so grease can be pumped in using a grease gun? Thank-you in-advance 👍

@shawndubay4050 Год назад

I have grease zerk fittings on my two stihls and one on my Husqvarna 525L. Had them in for a year and so far all is good 👍😊 Makes maintenance on machinery alot quicker. Just get the grease gun with trimmer gear grease and pump two to three pumps into it and good to go. I do that one or two times a year and keeps the gear box happy and spinning.

@deanmsimpson Год назад

That's great, thank-you for your reply Shawn 👍

@shawndubay4050 Год назад

@@deanmsimpson your welcome. If you want to know most anything about lawn equipment I can most likely help. I repair and tune most brands. Mostly on two stroke engines but have a pretty good amount of knowledge on four strokes as well. If it isn't blown to pieces I can generally fix it.

@deanmsimpson Год назад

@@shawndubay4050 Thank-you very much Shawn! You're a gent! I measured the threads on my Echo strimmer and Stihl hedge trimmer. The Echo grease plug is M8 x 1.25, so that's easy to replace with a grease nipple. However the Stihl grease plug measured M11 x 1.5. Grease nipples aren't available in this size. So I'll buy an additional grease plug and drill, tap and loctite a grease nipple in it to grease the gear box, then replace the original grease plug. The M11 x 1.5 threw me at first. It's a bit of an odd ball size. I presume Stihl do this on purpose so you have to buy their expensive grease?

@shawndubay4050 Год назад

@@deanmsimpson thank you and yes unfortunately. The drill and tap sounds like a great idea. Should work great. They used to put grease zerk fittings on the old green machine trimmers so as long as you don't go more than a maximum of four pumps of grease you should be good. The grease will circulate when the gearbox warms up and hit high rpms.

@drewpgambino3644 Год назад

No gasket?

@nightdipper5178 Год назад

Head Failure? That sounds bad no matter which way you look at it..... I have one of those 'weed wackers with handle bars'. Just checked it and I'll keep an eye on it. Thanks for the heads up!

@StevesSmallEngineSaloon Год назад

You're Welcome...

@Ballroomblitz255 Год назад

One should always be doing a once over of their equipment from time to time, it is part of owning small engine equipment maintenence. You can use medium strength blue loctite, removable with torque to ensure components don’t come loose in the application and there is a possibility of disassembling the components in the future. Comes in handy when there is vibration so that things don't loosen up and come loose.

@StevesSmallEngineSaloon Год назад

Right on

@kenbrown2808 Год назад

my dad's number 2 brush cutter still had the bolt, but the rest of the gear head is coming apart. I gave back his #1, when I got my own, so he can take the gear head off that and put it on #2. don't know if he's done that, or is just doing everything with #3.

@garyalensr Год назад

What is your opinion on the best grease to use Steve? I dont have a Stihl, but i do always maintain my outdoor equipment.

@happycamper6352 Год назад

Can we just use regular pink grease that we'd use on normal grease fittings?

@ThoughtfulBiped Год назад

Hi, Steve. Been watching your videos recently, thanks for all of the tips, definitely learning a thing or two. Have a question about high/low adjustment on string trimmers. I have a Stihl FS 240, when I switch over to the Stihl 3 point brush knife, should I adjust anything? Or should I just leave it where the settings are for the bump-feed string head? From various videos I have seen on RU-vid everyone makes the point of making sure your string is at full extension before making adjustments. Does the different weight of the brush knife make any difference? Thanks again, keep up the great work. All the best to you and yours.

@d_dizzie_druck5753 Год назад

gunna greaseup my 130 tomorrow

@StevesSmallEngineSaloon Год назад

Right on

@Super00001 Год назад

I got a Stihl weedeatwr as well. But it wouldn't start. So went to check the spark plug and that rubber boot came completely off. That wire broke off inside as well. What's the easiest way to fix that?

@MrLuigi-oi7gm Год назад

I have an FS81. It's over 30 years old, but still works like a charm. I have always monitored the grease level but have never cleaned out the grease and replaced it with fresh, new grease. Does this sound like a good idea???

@majorpayne5289 11 месяцев назад

👍It’s the little things! Thx Sir Steve.

@StevesSmallEngineSaloon 11 месяцев назад

You're Welcome...

@nickhellen6303 Год назад

Very good point. I grease mine every so often- gets used less than it used to. I also pull out the drive cable and grease it at the same time.

@nocode1603 Год назад

I had something similar happen to mine during lock down grease dried up then the ball race broke down firing out ball barings had to strip down & try remove the empty ball race ring in the head gear the hardest part of repair was removing the old race Couldn't get a gear puller in I heat up the head to get the old one out took ages but got it In then it was a total head bender cheers Steve 🏴󠁧󠁢󠁳󠁣󠁴󠁿🤘

@burtvhulberthyhbn7583 Год назад

Flush with diesel dry and refill with grease and you might get lucky

@kenbarbret6632 Год назад

Do they make a zert fitting plug to put in it's place? I don't know why, but I would think that being able to grease it once in a while would make it last longer and at least make it easier to see that it's missing. Good info. Thank you!

@p71collector Год назад

I think a person could drill and tap that plug to 1/4" bolt thread and screw a 1/4" zerk fitting into the plug. Just add grease every few hours and that gearhead should last a long time.

@happycamper6352 Год назад

@@p71collector Yes, but is basic everyday grease ok for that? I have the pink stuff that I would use for other equipment in my grease gun. I'd rather use that if it's safe, because I don't like buying consumables that would be bad/outdated before completely used. Buying a tube of an expensive Stihl brand grease that only serves one purpose is difficult for me to justify. If it's safe to use everyday grease gun grease, I'd rather do that, but I don't know enough about grease to know if that's ok.

@dougwheeler1439 Год назад

I would put a zert plug in there and grease it monthly. Solved

@Helmsteroni Год назад

I replace the plug on my products with a grease zerk fitting

@pauldiesel4582 Год назад

Thanks Steve, good point to check and easy fix if found.

@StevesSmallEngineSaloon Год назад

Right on

@williamjacobs236 Год назад

Another great video Steve .

@StevesSmallEngineSaloon Год назад

Thank You...

@papageo5 Год назад

Could you please do a video on preventing premature head balding? It's a little too late for me, but it may help some while they still have a chance.

@paulstir Год назад

Steve would you recommend thread locking it

@peachsncream5808 Год назад

Holy crap 🤯 . I thought that was the cutting compound manufacturing port .

@ogbobbye Год назад

is checking the grease in the head a P.M. item? I have had many trimmers over the years and have notice that plug on them but have never pulled it out to check for or add new grease.

@ToddAdams1234 Год назад

Why are there alemite fittings on there? It’s easy to use and to keep track of maintenance if they are on those.

@charliepearson1678 Год назад

Old news . guessing Echo and Stihl are trying to make a little extra money on gear heads now . well to be honest ive never seen many ppl use the grease point anyway .

@leroybishop2245 Год назад

🙏🏻

@h.wagner Год назад

Thanks for the tip!!! (Now I have to get up, go out and check the thing).

@StevesSmallEngineSaloon Год назад

DO IT!

@Swamp_Lad Год назад

Same…

@Swamp_Lad Год назад

I love Steve… I always watch his vids with a beer in hands. Polish Zubr Today

@wg4405 Год назад

Well Dam it Steve -- shouldn't be too hard to bench press that Stihl , it weighs about as much as a six-pack 🤔🤔💪💪🍻🍻

@StevesSmallEngineSaloon Год назад

Agreed!

@shanemak47 Год назад

🤔 you know what would be a good video to make is one on this whole shutting down your mower at full throttle I've seen it listed on a few mowers on the controls

@Colt3854 Год назад

Coarse threads like that shake loose easily. Loctite is the answer.

@mnhoss2100 Год назад

Maybe some blue thread locker to help keep it in?

@herenow2895 Год назад

In the Uk, the heads dont have a grease port anymore. They must want people to have to buy a new head.

@bumpkinrocks Год назад

Planned obsolescence. You'll go to buy a replacement head, it'll be out of stock with long back order. So you're forced to buy a new machine, all part of the plan😉

@pollywollydo Год назад

Can it be stripped cleaned and bearing(s) replaced ? 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇺🇸🏴󠁧󠁢󠁥󠁮󠁧󠁿

@bumpkinrocks Год назад

@@pollywollydo yes it's doable but it's just as likely the gears would be stripped due to lack of good grease.

@greybeard5774 Год назад

@@pollywollydo Absolutely .. if you're not afraid of such work ;)

@pollywollydo Год назад

@@greybeard5774 well you can only ruin it once 🤭. If you don’t try you don’t learn 🤔🙂

@bobpurs Год назад

Thanks Steve I’ll check mine

@StevesSmallEngineSaloon Год назад

Right on

@scottmclagan4276 Год назад

Blue threadlocker (any brand) is your friend with this one. Thanks Steve... great advice as always.

@StevesSmallEngineSaloon Год назад

You're Welcome...

@MrMarkpeggy Год назад

Thanks for the great advice, Steve and April! 👍😊

@StevesSmallEngineSaloon Год назад

You're Welcome...

@61hink Год назад

So why isn't that a fitting? Some people are saying that the grease needs to be topped up from time to time? Otherwise I would imagine you might want to Loctite it in if it's just supposed to be a closed system.

@happycamper6352 Год назад

It may be to prevent you from using non-Stihl grease.